WEKU – a GIS-Supported stochastic model of groundwater residence times in upper aquifers for the supraregional groundwater management

 The supraregional GIS-supported stochastical model, WEKU, for the determination of groundwater residence times in the upper aquifers of large groundwater provinces is presented. Using a two-dimensional analytical model of groundwater flow, groundwater residence times are determined within two extreme cases. In the first case, maximal groundwater residence times are calculated, representing the part of groundwater, that is drained by the main surface water of a groundwater catchment area. In the second case, minimal groundwater residence times for drainage into the nearest surface water are determined. Using explicit distribution functions of the input parameters, mean values as well as potential ranges of variations of the groundwater residence times are derived. The WEKU model has been used for the determination of groundwater residence times throughout Germany. The model results – mean values and deviations of the groundwater velocity and the maximal and minimal groundwater residence times in the upper aquifers – are presented by general maps and discussed in detail. It is shown that the groundwater residence times in the upper aquifer vary regionally, differentiated between less than 1 year and more than 2000 years. Using this information, the time scales can be specified, until measures to remediate polluted groundwater resources may lead to a substantial groundwater quality improvement in the different groundwater provinces of Germany. With respect to its supraregional scale of application, the WEKU model may serve as a useful tool for the supraregional groundwater management on a state, federal or international level. Received: 15 August 1995 · Accepted: 15 October 1995     

Radon variations in a Hungarian village

 A steady radon exhalation is assumed in most publications. In a village of North-East Hungary, however, high radon concentrations have been measured, differing strongly in neighbouring houses and varying in time, due to the interplay of geochemical phenomena. Received: 20 November 1995 · Accepted: 18 June 1996     

Generating interface waves using a freely falling, instrumentedsource

In recent years, interface waves such as the Scholte wave have become important tools in the study of the geoacoustic properties of near-bottom seafloor sediments. Traditionally, these waves have been generated by explosive or pneumatic sources deployed at or near the seafloor and monitored by ocean-bottom seismographs or geophone arrays. While these sources generate the requisite interface waves, they also produce higher frequency compressional waves in the water and sediment that tend to contaminate the surface wave and make inversion of the data difficult in the near field. In this paper, a new source consisting of a freely falling projectile instrumented with an accelerometer is described. When the projectile impacts the bottom, the exact time history of the vertical force applied to the sediment is known and therefore may be convolved with the transfer function of a sediment geoacoustic model to produce accurate synthetic seismograms. Moreover, the vertical force applied to the seafloor is very efficient in generating surface wave motion while producing very little compressional wave energy so that the near-field signals are much more easily analyzed. An example of the use of the new source is presented including inversion of the received signals to obtain shear-wave velocity and attenuation as a function of depth in the near bottom sediments at a shallow-water site     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Paleostress-tensor analysis of late deformation events in the Odenwald Crystalline Complex and comparison with other units of the Mid-German Crystalline Rise, Germany

Summary Geometric data of fault planes and fault plane lineations, together with the observed sense of shear on the slip planes, were used to calculate paleostress tensors and fields responsible for the post metamorphic peak D3 and D4 deformation events in the four Odenwald units sensu Krohe (1991). The paleostress fields were calculated using the method of Will and Powell (1991). As inferred from the paleostress analysis, the D3 strike-slip deformation west of the Otzberg fault zone was caused by a, ± N-S directed, compressional regional stress field, with shallowly plunging σ₁ axes and σ₃ directions that plunge at shallow to moderate angles to the E or W; the calculated mean orientations are: σ₁ 06 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. The B?llsteiner Odenwald east of the Otzberg fault zone was not affected by this stress field. This implies that the Bergstr?sser and B?llsteiner Odenwald were spatially separated and formed independent crustal blocks during D3. The D4 faulting event is recognised in all areas investigated, even though most prominently in units III and IV, and juxtaposed the Bergstr?sser and B?llsteiner Odenwald. This faulting episode was caused by a paleostress field with a steeply westerly plunging σ₁ axis and a shallowly southsoutheasterly plunging σ₃ axis. The orientations of the principal stresses are: σ₁ 52 → 270, σ₂ 38 → 085 and σ₃ 06 → 174. With continued deformation from D3 to D4, there was a progressive change in the orientation of the stress field indicating a change from a N-S compressional to extensional stress field, accompanied by the progressive development of strike-slip faults and late normal faults. Paleostress field orientations in the Pfalz Forest, SW of the Odenwald, determined by Fl?ttmann and Oncken (1992) are very similar to those obtained for the Odenwald region and indicate a regionally consistent stress pattern in the southwestern part of the Mid-German Crystalline Rise (MGCR) during strike-slip and normal faulting deformations.

---

Zusammenfassung Paleostress-Tensor Analyse sp?ter Deformationsereignisse im Odenwald-Kristallin und ein Vergleich mit anderen Einheiten der Mitteldeutschen Kristallinzone, Deutschland Für die vier Odenwald-Einheiten im Sinne von Krohe (1991) wurden Pal?ostressfelder für die Blattverschiebungs- und Abschiebungsereignisse D3 und D4 mit der Methode von Will und Powell (1991) berechnet. Die Analyse ergibt, da? das regionale Spannungsfeld, das westlich der Otzberg-Zone im Bergstr?sser Odenwald zum D3-Ereignis führte, ein ± N-S gerichtetes kompressives Stresssfeld war. Die σ₁-Achse f?llt flach nach N bzw. S ein, die σ₃-Achse mit kleinen bis moderaten Winkeln nach E bzw. W; die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 08 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. Der B?llsteiner Odenwald, ?stlich der Otzberg-Zone, wurde von diesem Spannungsfeld nicht erfa?t. Dies impliziert, da? Bergstr?sser und B?llsteiner Odenwald w?hrend des D3-Ereignisses voneinander getrennt waren und separate Krusteneinheiten darstellten. Auswirkungen der D4-Deformation k?nnen im gesamten Untersuchungsgebiet erkannt werden, am st?rksten jedoch in den Einheiten III und IV. Dieses Ereignis wurde von einem Pal?ostressfeld mit einer steil nach W einfallenden σ₁- und einer flach nach SSE einfallenden σ₃-Achse verursacht und führte zum Zusammenschlu? von Bergstr?sser und B?llsteiner Odenwald. Die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 52 → 270, σ₂ 38 → 085 und σ₃ 06 → 174. Die Rotation der Hauptspannungsrichtungen war mit einer ?nderung von einem kompressionalen N-S gerichteten (D3) hin zu einem extensionalen (D4) Stressfeld verbunden. Die erzielten Ergebnisse sind sehr ?hnlich mit Resultaten, die Fl?ttmann und Oncken (1992) im Pf?lzer Wald ermittelten. Dies weist auf ein regional übereinstimmendes Spannungsfeld im SW-Teil der Mitteldeutschen Kristallinzone hin.

---

---

Received July 8, 1999; revised version accepted March 28, 2000     

Realisation of a celestial system based on VLBI geodynamics programs

The relative orientations of various VLBI celestial reference frames are evaluated on the basis of coordinate differences of common sources. It is shown that an accuracy better than 0.001 can be achieved. Possible regional deformations in the different catalogues are investigated; they are found to reach a few 0.001 in some restricted zones. The application of these studies to the realisation of a combined celestial reference frame consistent with the BIH Terrestrial System is outlined.     

The wadic project: A comprehensive field evaluation of directional wave instrumentation

The results of a comprehensive field trial of nearly all commercially available directional wave measurement systems at the Edda field in the North Sea during winter 1985-86 are presented. The results summarize the accuracy of the principal engineering wave parameters from each system and the dependence on sea state. Limiting factors on system performance and operational problems are also included in the assessment. Overall experience has been good with systems utilizing widely different measurement principles returning consistent results.     

Diffusion-deposition patterns in Martian streaks

The spreading angle of a number of light and dark Martian streaks is determined from selected Mariner 9 images. The resulting frequency distributions of spreading half-angles have maxima at ～5° for light, and ～7° for dark streaks; however the dark streaks have a secondary maximum spreading angle at ～14°. The smaller values, which include most streaks, are interpreted as crater-wake spreading phenomena. The larger value, found in only a few dark streaks or “tails,” may result from atmospheric diffusion and subsequent deposition of material from isolated sources such as vents or blowouts. An atmospheric diffusion-deposition analysis is presented, assuming this streak origin, from which it is possible to deduce the eddy diffusivity, K, in Mars' boudary layer. Calculated K values are found to agree with various theoretical estimates. They lie in the range 10⁷ and 10⁹ cm² sec^?1 and exhibit the proper scale dependence. Thus it appears that, in addition to streak-derived wind direction patterns and speed information, it is possible in a few cases to derive information on Mars' boundary-layer turbulence from streak-spreading measurements.