Dry deposition of particles to a pine plantation

There has been some controversy concerning the rate of deposition of particles having diameters near 1.0 m to vegetated surfaces. In this size range, the processes of Brownian diffusion and inertial impaction are not effective and deposition to smooth surfaces reaches a minimum. However, most measurements of deposition of micrometer diameter particles to vegetated surfaces indicate a greater deposition than extrapolation of the results from less rough surfaces would suggest. In this study, the aerodynamic profile method was used to estimate deposition to a pine plantation. The deposition velocities were found to be sensitive to the displacement height and the form of the profile stability correction used in the calculations. An analysis of a limited set of Bowen ratio data, collected over the same forest, suggests that the data are reasonably described by using a displacement height of 7.9 m and the stability correction proposed by Raupach (1979).The average deposition velocities, measured over a 9-month period were 0.0043, 0.0078, and 0.0092 m/s for the three diameter classes 0.5\2-1.0, 1.0\2-2.0 and 2.0\2-5.0 \gmm. These deposition velocities are lower than the corresponding aerodynamic conductance for the same periods, indicating that the deposition rate is limited by surface phenomena. Average surface conductances calculated for the three size classes of particles were 0.0060, 0.0141, and 0.0276 m/s, respectively. A multiple regression analysis showed high correlation between deposition velocity and wind speed. No other measured environmental factor or linear combination of factors was significantly correlated with deposition velocity.This paper was prepared in connection with work done under Contract No. DE-AC09-76R00001 with the U.S. Department of Energy. By acceptance of this paper, the publisher and/or recipient acknowledges the U.S. Government's right to retain a nonexclusive, royalty-free license in and to any copyright covering this paper, along with the right to produce and to authorize others to reproduce all or part of the copyrighted paper.     

Pressure-induced (Al,Si)[4]-ordering in dioctahedral micas?

Pure, synthetic 2M₁-muscovites (Ms) and 2M₁-paragonites (Pg) prepared at 7, 13.5, and 18 kbar have been subjected to careful X-ray powder diffractometry and IR powder spectrometry. The results of X-ray studies show that the lattice constants of these micas are independent of the pressure employed in synthesizing them. Similarly, the IR powder spectra of Ms and Pg remain unaffected by the synthesis pressure. Neither the Al^[4]-O-Al^[4] vibrations decrease in relative intensity nor do the Si-O-Al^[4] vibrations increase in intensity with increasing pressure of synthesis, as they should, if pressure-induced (Al, Si)^[4] ordering had been operative. Finally, the v _OH bands in Ms and Pg are also found to retain their fine structural details, regardless of the pressures employed in synthesizing these phases. In particular, the half widths of v _OH in these (Al,Si)^[4]-disordered micas remain constant at around 60 cm⁻¹, compared to ∼ 10 cm⁻¹ in (Al,Si)^[4]-ordered mica margarite. In the light of this study, shortening of the b lattice parameter and progressive (Al,Si)^[4] ordering with increasing pressure of synthesis of muscovites reported by Velde (1980) would appear to be anomalous. Consequently, any discussion of the effect of (Al,Si)^[4] ordering on the stability of muscovite is a moot point at present.     

Ecological classification of macrophytes and phytobenthos for rivers in Germany according to the water framework directive

A new assessment system for macrophytes and phytobenthos in German rivers meeting the requirements of the Water Framework Directive (WFD) of the European Community is described. Biocoenotic types based on biological, chemical and hydromorphological data from over 200 river sites covering the main ecoregions, hydromorphological stream types and degradation forms have been defined. For developing a classification system the quality element macrophytes and phytobenthos was divided into three components: macrophytes, benthic diatoms and remaining phytobenthos. For macrophytes seven types including one subtype, for benthic diatoms 14 types including three subtypes and for the remaining phytobenthos five river types were identified. The benthic vegetation at reference condition was described for most of the river types. Degradation is characterised as deviation in benthic vegetation species composition and abundance from the reference biocoenosis. For classification in five ecological status classes, several metrics were developed and used in combination with existing indices. For some of the described river types additional investigations are necessary before a classification system can be developed.     

Assessing streams in Germany with benthic invertebrates: development of a practical standardised protocol for macroinvertebrate sampling and sorting

In the past, no single standardised method for sampling and sorting benthic macroinvertebrates has been implemented in Germany. Therefore, we tested the suitability of two common sorting protocols, RIVPACS and AQEM/STAR, by taking samples with each protocol at 44 sampling sites. Our results reveal that different methods deliver slightly different assessment results. Moreover these two methods differ in costs. Although the AQEM/STAR protocol takes longer than the RIVPACS protocol, we favoured the AQEM/STAR protocol because of its higher level of standardisation. In order to limit costs to an acceptable level, a modification of the AQEM/STAR protocol (MAS method) is developed. This method is highly standardised, gives stable assessment results and is relatively inexpensive (€ 224.00 for processing of an average sample). A detailed protocol of the newly developed method is given.     

Numerical approximation of water–air two-phase flow by the mixed finite element method

A new model for two-phase flow of water and air in soil is presented. This leads to a system of two mass balance equations and two equations representing conservation of momentum of fluid and gas, respectively. This paper is concerned with the verification of this model for the special case of a rigid soil skeleton by computational experiments. Its numerical treatment is based on the Raviart–Thomas mixed finite element method combined with an implicit Euler time discretization. The feasibility of the method is illustrated for some test examples of one- and two-dimensional two-phase flow problems.     

Origin, age and stratigraphic significance of distal fallout ash tuffs from the Carboniferous–Permian continental Saar–Nahe Basin (SW Germany)

Thin, widespread, fallout tuff layers interbedded within fluvio-lacustrine successions of the Carboniferous-Permian Saar-Nahe Basin provide important tephrostratigraphic markers. In addition, radiogeochronometric data derived from the tuffs serve as calibration points for the adjustment to regional chronostratigraphy and to numerical time scales. The Pappelberg-Tuff in the Meisenheim Formation (Glan Group) has been dated by U/Pb zircon SHRIMP technique at 297.0Dž.2 Ma. Taking the Carboniferous/Permian boundary at 296 Ma, the Meisenheim Formation coincides approximately with this boundary. Consequently, underlying strata, lithostratigraphically regarded as the basal part of the 'Rotliegend', chronostratigraphically belong to the Upper Carboniferous. Bed thicknesses, grain size and sorting characteristics of the tuffs and the absence of contemporaneously emplaced volcanics within the Saar-Nahe Basin point to an extrabasinal derivation of the wind-drifted volcanic ash. Decreasing grain sizes of juvenile pyroclastic particles towards the north suggest source areas south of the basin within 300 km distance. The majority of the tuffs are rhyolitic to rhyodacitic and indicate petrographic and geochemical affinities to Moldanubian S-type granitoids, in particular to highly differentiated two-mica granites, and related volcanic effusives. Within the time frame considered here, such potential source rocks were emplaced in the northern and central Black Forest (SW Germany) and the northern Vosges (E France) at 100-150 km distance south of the Saar-Nahe Basin.     

Towards an integration of process measurements, archive analysis and modelling in geomorphology — the Kärkevagge experimental site, Abisko area, northern Sweden

The analysis of Holocene geomorphic process activity demands long–term data sets, which are available for the Kärkevagge catchment due to 50 years of intensive geomorphologic field studies. This data set is used in combination with additional field measurements, remote sensing and digital elevation model (DEM) analysis to provide input data for modelling Holocene valley development. On the basis of this information, geomorphic process units (GPUs) are defined by means of GIS modelling. These units represent areas of homogeneous process composition that transfer sediments. Since the data base enables the quantification of single processes, the interaction of processes within the units can also be quantified. Applying this concept permits calculation of recent sediment transfer rates and hence leads to a better understanding of actual geomorphic landscape development activity. To extrapolate these data in time and space the process–related sediments in the valley are analysed for depth and total volume, primarily using geophysical methods. In this fashion the validity of measured process rates is evaluated for the Holocene time scale. Results from this analysis are exemplified in a cross–profile showing some of the principal sediment units in the valley. For example, the measured modern rates on a slush torrent debris fan seem to represent the Holocene mean rate. This approach should also be suitable for revealing Holocene geomorphic landscape development in terms of climate change.     

Metamorphism of four desert ureilites and luminescence spectroscopy of defects in ureilitic diamonds

Four ureilites subjected to impact metamorphism in a pressure range of ~15–100 GPa were investigated for mineralogical and petrological features and optical luminescence of their diamonds with the aim to understand how properties of ureilitic diamonds are correlated with shock and thermal histories of the host meteorite. Petrological data show that all the investigated ureilites experienced multistage metamorphic histories. Some of them were shocked at least twice or/and underwent high‐temperature thermal metamorphism and fluid metasomatism in the parent body interior. Photoluminescence spectra of individual diamond grains reveal the presence of neutral and negatively charged nitrogen‐vacancy (NV⁰ and NV^?, respectively) and H3 (two nitrogens and a vacancy) defects, indicating relatively high nitrogen contents of the diamonds and some degree of thermal annealing of the grains. The diamond grain size and morphology, a texture of graphite‐diamond aggregates, and spectroscopic properties of the diamond phase vary widely both within an individual meteorite and between the ureilites. Shock‐driven transformation of sp2‐C into diamond provides the most natural explanation of the observed spectroscopic diversity of the diamond grains if one takes into account strong dependence of the PT parameters and efficiency of the transformation on structure of the carbonaceous precursor.     

Composition and origin of holotype Al‐Cu‐Zn minerals in relation to quasicrystals in the Khatyrka meteorite

We investigated the khatyrkite–cupalite holotype sample, 1.2 × 0.5 mm across. It consists of khatyrkite (Cu,Zn)Al₂, cupalite (Cu,Zn)Al, and interstitial material with approximate composition (Zn,Cu)Al₃. All mineral phases of the holotype sample contain Zn and lack Fe that distinguishes them from khatyrkite and cupalite in the Khatyrka meteorite particles (Bindi et al. 2009 , 2011 , 2012 , 2015 ; MacPherson et al. 2013 ; Hollister et al. 2014 ). Neither highly fractionated natural systems nor geo‐ or cosmochemical processes capable of forming the holotype sample are known so far. The bulk chemistry and thermal history of khatyrkite–cupalite assemblage in the holotype sample hint for its possible industrial origin. Likewise, the aluminides in the Khatyrka meteorite particles may also be derived from industrial materials and mixed with extraterrestrial matter during gold prospecting in the Listvenitovy Stream valley.     

Soil hydrological response under simulated rainfall in the Dehesa land system (Extremadura,SW Spain) under drought conditions

Soil hydrology was investigated in the Guadelperalón experimental watershed in order to determine the influence of land use and vegetation cover on runoff and infiltration within the Dehesa land system. Five soil–vegetation units were selected: (1) tree cover, (2) sheep trials, (3) shrub cover, (4) hillslope grass and (5) bottom grass. The results of the simulated rainfall experiments performed at an intensity of 56·6 mm h⁻¹ during one hour on plots of 0·25 m², and the water drop penetration time test indicate the importance of water repellency in the Dehesa land system under drought conditions. Low infiltration rates (c. 9–44 mm h⁻¹) were found everywhere except at shrub sites and in areas with low grazing pressure. Soil water repellency greatly reduced infiltration, especially beneath Quercus ilex canopies, where fast ponding and greater runoff rates were observed. The low vegetation cover as a consequence of a prolonged drought and grazing pressure, in conjunction with the soil water repellency, induces high runoff rates (15–70 per cent). In spite of this, macropore fluxes were found in different locations, beneath trees, on shrub-covered surfaces, as well as at sites with a dominance of herbaceous cover. Discontinuity of the runoff fluxes due to variations in hydrophobicity causes preferential flows and as a consequence deeper infiltration, especially where macropores are developed. © 1998 John Wiley & Sons, Ltd.