Space weathering on the Moon: Patina on Apollo 17 samples 75075 and 76015

Abstract— We studied patinas on lunar rocks 75075 and 76015 from the Apollo collection using a multi-disciplinary approach, including scanning electron microscopy (SEM), energy dispersive x-ray spectrometry (EDS), transmission electron microscopy (TEM), wavelength-dispersive x-ray (WDS) mapping, Mössbauer spectroscopy, spectral reflectance, and microspectrophotometry. Based on SEM petrography, we have defined three textural types of patina: glazed, fragmental, and classic (cratered). The presence of classic patina is diagnostic of lunar samples that have been exposed directly to the space weathering environment. It is characterized by the presence of microcraters and glass pancakes and is the patina type studied by earlier workers. Classic patina is found on 76015 but not on 75075. Glazed patina is found on both 76015 and 75075, whereas fragmental patina is found only on 75075. The glazed and fragmental patinas on 75075 were probably formed as a result of relatively large nearby impacts; and although these two types of patina are not strictly the result of direct exposure to the space weathering environment, they are important because they affect the optical properties of the rocks. Field emission gun SEM (FE-SEM) of classic patina on 76015 shows evidence of possible solar wind sputtering erosion. Transmission electron microscope studies of 76015 reveal the presence of impact-generated deposits and solar flare particle tracks which, like microcraters and pancakes, are diagnostic of direct exposure to space weathering processes. The outermost surface of the 76015 patina consists of an amorphous rim very much like the rims found on individual lunar soil grains; this amorphous patina rim probably formed by similar processes of impact-generated vapor condensation and possible sputter deposition. Wavelength-dispersive x-ray element maps of polished thin sections of 75075 and 76015 indicate that patina compositions are poor indicators of the compositions and mineralogies of the rocks underlying them. On average, the reflectance spectra of patinas on both samples are slightly darker than those of their unweathered equivalents. Microreflectance measurements show that a thick patina can dramatically alter the optical properties of the rock on which it forms. The backscatter Mössbauer (BaMS) spectrum of a patina-covered surface of 76015 is very similar to that of an unweathered surface, indicating that the Mössbauer signal is generated from beneath the patina. Because BaMS “sees” through surface space-weathering effects to the underlying rock, this technique has great potential for use in robotic missions to other planetary bodies.     

Close up observation and inversion of low-altitude ENA emissions during a substorm event

During a series of substorm events on November 12 2004, the Neutral Atom Detector Unit(NUADU) flying onboard the TC-2 spacecraft observed, close to perigee, bright low-altitude Energetic Neutral Atom(ENA) emissions from both north and south poles. Through utilizing high temporal and spatial resolution data inversion techniques we present here a global view the associated processes of energetic ion deposition and injection at the uniquely high temporal resolution of a few minutes. It is demonstrated that the ENA emissions observed came mainly from the, low-altitude, high magnetic latitude polar region. Since precipitating ions follow magnetic field lines and have more chance to produce ENA emissions through charge exchange there.Therefore, the employment of a low-orbit satellite to record at high temporal and spatial resolution ENA image data is inferred to be the best way to monitor those dynamic ring current variations that occur during geomagnetic activity.     

Fluvial dynamics and 14C-10Be disequilibrium on the Bolivian Altiplano

Determining sediment transfer times is key to understanding source-to-sink dynamics and the transmission of environmental signals through the fluvial system. Previous work on the Bolivian Altiplano applied the in situ cosmogenic ¹⁴C-¹⁰Be-chronometer to river sands and proposed sediment storage times of ~10–20 kyr in four catchments southeast of Lake Titicaca. However, the fidelity of those results hinges upon isotopic steady-state within sediment supplied from the source area. With the aim of independently quantifying sediment storage times and testing the ¹⁴C-¹⁰Be steady-state assumption, we dated sediment storage units within one of the previously investigated catchments using radiocarbon dating, cosmogenic ¹⁰Be-²⁶Al isochron burial dating, and ¹⁰Be-²⁶Al depth-profile dating. Palaeosurfaces appear to preserve remnants of a former fluvial system, which has undergone drainage reversal, reduction in catchment area, and local isostatic uplift since ~2.8 Ma. From alluvium mantling the palaeosurfaces we gained a deposition age of ~580 ka, while lower down fluvial terraces yielded ≤34 ka, and floodplains ~3–1 ka. Owing to restricted channel connectivity with the terraces and palaeosurfaces, the main source of channel sediment is via reworking of the late Holocene floodplain. Yet modelling a set of feasible scenarios reveals that floodplain storage and burial depth are incompatible with the ¹⁴C-¹⁰Be disequilibrium measured in the channel. Instead we propose that the ¹⁴C-¹⁰Be offset results from: (i) non-uniform erosion whereby deep gullies supply hillslope-derived debris; and/or (ii) holocene landscape transience associated with climate or human impact. The reliability of the ¹⁴C-¹⁰Be chronometer vitally depends upon careful evaluation of sources of isotopic disequilibrium in a wide range of depositional and erosional landforms in the landscape. © 2018 John Wiley & Sons, Ltd.     

The persistence and character of stranded oil on coarse-sediment beaches

Small amounts of oil that can persist for decades in the intertidal zone of coarse-sediment beaches have been documented in a few well-studied cases. Oil that survives attenuation over the short-term (weeks to months) will persist until there is a change in the environmental conditions, as might occur where there is a seasonal storm-wave climate or as a beach undergoes long-term (erosional) changes. Oil residues can persist on the beach surface as tar mats, asphalt-like pavements, or as veneers on sediment particles or hard surfaces. Subsurface oil residues can persist in similar forms or as fill or partial fill of the pore spaces between coarse-sediment particles. Oil penetrates until it reaches fine-grained sediment, the water table, bedrock, or other penetration-limiting layers. Amounts of persistent oil are very small fractions of the volumes that were originally stranded and these protected residues can continue to biodegrade as they become thinner and more discontinuous.     

Aftershock of the Wenchuan Earthquake in Sichuan Triggers Large Earthquake in Minxian County, Gansu

Because of the confining compression of the Pacific,Eurasian and Indian plates,the Chinese mainland is frequently stricken with earthquakes,especially in the Qinghai-Tibet Plateau and surrounding areas and along the NS-trending tectonic zone from Yinchuan to Lanzhou,Chengdu,and finally to the Kunming tectonic belt (Fig.1).Historical records show that there are 14 earthquakes of＞Ms 8 occurring in the two regions,eight of which occurred along the latter tectonic belt.The 2008 Wenchuan earthquake located on both the NS tectonic zone and the Longmenshan fault zone along the eastern margin of the Qinghai-Tibet Plateau.     

Lower-crustal rifting in the Rukwa Graben, East Africa

An M_w 5.9 earthquake occurred in the Lake Rukwa rift, Tanzania, on 1994 August 18, and was well recorded by 20 broad-band seismic stations at distances of 160 to 800 km and 21 broad-band stations at teleseismic distances. The regional and teleseismic waveforms have been used to investigate the source characteristics of the main shock, and also to locate aftershocks that occurred within three weeks of the main shock. Teleseismic body-wave modelling yields the following source parameters for the main shock: source depth of 25 ± 2 km, a normal fault orientation, with a horizontal tension axis striking NE-SW and an almost vertical pressure axis (Nodal Plane I: strike 126°–142°, dip 63°–66°, and rake 280°–290°; Nodal Plane II: strike 273°–289°, dip 28°–31°, and rake 235°–245°), a scalar moment of 4.1 times 10¹⁷ N m, and a 2 s impulsive source time function. Four of the largest aftershocks also nucleated at depths of 25 km, as deduced from regional sPmp–Pmp times. The nodal planes are broadly consistent with the orientation of both the Lupa and Ufipa faults, which bound the Rukwa rift to the northeast and southwest, respectively. The rupture radius of the main shock, assuming a circular fault, is estimated to be 4 km with a corresponding stress drop of 6.5 MPa. Published estimates of crustal thickness beneath the Rukwa rift indicate that the foci of the main shock and aftershocks lie at least 10 km above the Moho. The presence of lower-crustal seismicity beneath the Rukwa rift suggests that the pre-rift thermal structure of the rifted crust has not been strongly modified by the rifting, at least to depths of 25 km.     

Numbers,types, and compositions of an unbiased collection of cosmic spherules

Abstract— Micrometeorites collected from the bottom of the South Pole water well (SPWW) may represent a complete, well‐preserved sample of the cosmic dust that accreted on Earth from 1100–1500 A.D. We classified 1588 cosmic spherules in the size range 50–800 μm. The collection has 41% barred olivine spherules, 17% glass spheres, 12% cryptocrystalline spherules, 11% porphyritic olivine spherules, 12% relicgrain‐bearing spherules, 3% scoriaceous spherules, 2% I‐type spherules, 1% Ca‐AI‐Ti‐rich (CAT) spherules, and 1% G‐type spherules. We also found bubbly glass spherules, spherules with glass caps, and ones with sulfide coatings—particles that are absent from other collections. A classification sequence of the stony spherules (scoriaceous, relic‐grain‐bearing, porphyritic, barred olivine, cryptocrystalline, glass, and CAT) is consistent with progressive heating and evaporation of Fe from chondritic materials. The modern‐day accretion rate and size distribution measured at the SPWW can account for the stony spherules present in deep‐sea collection through preferential dissolution of glass and small stony spherules. However, weathering alone cannot account for the high accretion rate of I‐type spherules determined for two deep‐sea collections. The SPWW collection provides data to constrain models of atmospheric‐entry heating and to assess the effects of terrestrial weathering.     

Developing the Commons: The Contradictions of Growth in Exurban Montana

Property development in exurban areas has the capacity to undermine the amenity values that undergird that development. Predicated on that contradiction, this research seeks to explain the emergence of local, informal, planning-based regulations in the traditionally antiregulatory context of rural Montana. Adopting both the insights of institutional common property theory and those of critical materialist analysis of economic growth, the work reconciles accounts of development as inherently ecologically self-destructive with those stressing creative development and adoption of rules for collective self-governance. Using a detailed case analysis of a Montana county undergoing rapid growth, it examines what drives localized land use regulation, what controls are enacted, and whether such controls are resisted or facilitated by development capital. Findings suggest that informal regulations seek to control externalities of development on valuable amenity commons and that they are adopted with the acceptance, if not encouragement, of the development community. These fragile instruments are vulnerable to opposition, however, highlighting problems of more general relevance: Growth depends on a deregulated development regime, which produces externalities that undermine the valorization of property. Localized regulatory planning regimes are therefore both a solution to contradictions inherent in growth and a potential source of future planning problems.     

Surface evolution of dissolving minerals investigated with a kinetic Ising model

In natural weathering systems, both the chemistry and the topography of mineral surfaces change as rocks and minerals equilibrate to surface conditions. Most geochemical research has focused on changes in solution chemistry over time; however, temporal changes in surface topography may also yield information about rates and mechanisms of dissolution. We use stochastic dissolution simulations of a regular 2-D lattice with reaction mechanisms defined in terms of nearest neighbor interactions to elucidate how the surface area and reactivity of a crystal evolve during dissolution. Despite the simplicity of the model, it reproduces key features observed or inferred for mineral dissolution. Our model results indicate that: (i) dissolving surfaces reach a steady-state conformation after sufficient dissolution time, (ii) linear defects cause surface area and dissolution rate to vary in concert with one another, (iii) sigmoidal and non-sigmoidal rate vs. free-energy of reaction (ΔG_rxn) behavior can be rationalized in terms of the multiple steps occurring during dissolution, and (iv) surface roughness as a function of ΔG_rxn is highly sensitive to the reaction mechanism. When simulated times to reach steady-state are compared to published time series rate data using suitable scaling, good agreement is found for silicate minerals while the model significantly over-predicts the duration of the transient for Fe and Al oxides. The implication of our simple model is that many aspects of mineral dissolution behavior, including approach to steady-state, sigmoidal vs. non-sigmoidal rate vs. ΔG_rxn behavior, and development of rougher surfaces in conditions further from equilibrium can be explained by nearest neighbor interactions and simple Kossel-type models where reactivity of a surface is defined in terms of perfect surface, step, and kink sites.