Structural controls on topography and river morphodynamics in Upper Assam Valley,India

The basement in Upper Assam foreland basin exhibits a typical flexure pattern. An elongated continuous subsurface basement high has developed between Himalaya and Naga-Patkai ranges. A few prominent basement lows have developed adjacent to the foothill regions. It is noticed that the general topographic slope near the foothill regions is not only controlled by aggradation process, but also influenced by the flexured basement of the region. The basement lows have influenced the overlying topography significantly. Rivers flowing over those regions have shown unidirectional lateral migration. North bank tributaries like Subansiri, Jiadhal and Dikrang have been affected by the Subansiri basement low. Coseismic subsidence of sediments over Subansiri basement low had resulted subsidence of the North Lakhimpur-Ranga Nadi region in 1950 Assam earthquake. Some south bank tributaries like Disang and Dikhow have been affected by Nazira basement low. Topographic elevation along the Subansiri river is lower than that part of the Brahmaputra located south of Majuli. This typical topographic setting of the region makes the mouth of the Subansiri river and Majuli region highly susceptible to erosion.     

Petrography and provenance of Upper Cretaceous – Palaeogene sandstones in the foreland basin system of Central Nepal

Sedimentary deposits of the Cretaceous to Miocene Tansen Group of Lesser Himalayan association in central Nepal record passive-margin sedimentation of the Indian Continent with direct deposition onto eroded Precambrian rocks (Sisne Formation onto Kaligandaki Supergroup rocks), succeeded by the appearance of orogenic detritus as the Indian continent collided with Asia on a N-dipping subduction zone. Rock samples from two field traverses were examined petrographically and through detrital zircon U–Pb dating, one traverse being across the Tansen Group and another across the Higher and Tethyan Himalaya (TH). The Tansen Group depositional ages are well known through fossil assemblages. We examined samples from three units of the Tansen Group (Amile, Bhainskati, and Dumri Formations). The Sedimentary petrographic data and Qt F L and Qm F Lt plots indicate their ‘Quartzose recycled’ nature and classify Tansen sedimentary rocks as ‘recycled orogenic’, suggesting Indian cratonic and Lower Lesser Himalayan (LLH) sediments as the likely source of sediments for the Amile Formation (Am), the TH and the Upper Lesser Himalaya (ULH) as the source for the Bhainskati Formation (Bk), and both the Tethyan and Higher Himalaya (HH) as the major sources for the Dumri Formation (Dm). The Cretaceous–Palaeocene pre-collisional Am is dominated by a broad detrital zircon U–Pb ~1830 Ma age peak with neither Palaeozoic nor Neoproterozoic zircons grains, but hosts a significant proportion (23%) of syndepositional Cretaceous zircons (121–105 Ma) would be contributions from the LLH volcanosedimentary arc, Gangdese batholith (including the Xigaze forearc). The other formations of the Tansen Group are more similar to Tethyan units than to Higher Himalaya Crystalline (HHC). From the analysed samples, there is a lack of distinctive evidence or HH detritus in the Tansen basin. Furthermore, the presence of ~23±1 Ma zircons from the HH unit suggests that they could not have been exposed until the earliest Miocene time.     

Propagation of Rayleigh waves in soils

Summary Propagation of Rayleigh type waves in soils is considered in this paper. It is a well known fact that soils do not behave like an ordinary isotropic elastic medium where the ratio of Young's modulus to the modulus of rigidity is much less than that in sandy soils. Considering the velocity of Rayleigh type wave as less than that of distortional wave (which is an observed fact) a probable value of this ratio is determined, and also assuming the value of this ratio based on some experimental data, the velocity of wave propagation in the medium is deduced.     

Performance of flood frequency pooling analysis in a low CV context

Abstract

Pooling of flood data is widely used to provide a framework to estimate design floods by the Index Flood method. Design flood estimation with this approach involves derivation of a growth curve which shows the relationship between X_T and the return period T, where X_T ?=?Q_T /Q_I and Q_I is the index flood at the site of interest. An implicit assumption with the Index Flood procedure of pooling analysis is that the X_T –T relationship is the same at all sites in a homogeneous pooling group, although this assumption would generally be violated to some extent in practical cases, i.e. some degree of heterogeneity exists. In fact, in only some cases is the homogeneity criterion effectively satisfied for Irish conditions. In this paper, the performance of the index-flood pooling analysis is assessed in the Irish low CV (coefficient of variation) hydrology context considering that heterogeneity is taken into account. It is found that the performance of the pooling method is satisfactory provided there are at least 350 station years of data included. Also it is found that, in a highly heterogeneous group, it is more desirable to have many sites with short record lengths than a smaller number of sites with long record lengths. Increased heterogeneity decreases the advantage of pooling group-based estimation over at-site estimation. Only a heterogeneity measure (H1) less than 4.0 can render the pooled estimation preferable to that obtained for at-site estimation for the estimation of 100-year flood. In moderately to highly heterogeneous regions it is preferable to conduct at-site analysis for the estimation of 100-year flood if the record length at the site concerned exceeds 50.

Editor Z.W. Kundzewicz; Associate editor A. Carsteanu

Citation Das, S. and Cunnane, C., 2012. Performance of flood frequency pooling analysis in a low CV context. Hydrological Sciences Journal, 57 (3), 433–444.     

Occurrence of anthropogenic and naturally-produced organohalogenated compounds in tissues of Black Sea harbour porpoises

Harbour porpoises are one of the three cetacean species inhabiting the Black Sea. This is the first study to report on polybrominated diphenyl ethers (PBDEs) and naturally-produced compounds, methoxylated PBDEs (MeO-PBDEs) and polybrominated hexahydroxanthene derivatives (PBHDs), in tissues (kidney, brain, blubber, liver, muscle) of male harbour porpoises (11 adults, 9 juveniles) from the Black Sea. Lipid-normalized concentrations decreased from muscle > blubber > liver > kidney > brain for the sum of polychlorinated biphenyls (PCBs) and for the sum of PBDEs. Among the naturally-produced compounds, levels of PBHDs were higher than of MeO-PBDEs, with tri-BHD and 6-MeO-BDE 47 being the dominant compounds for both groups, respectively. Concentrations of naturally-produced compounds decreased from blubber to brain, similarly to the sum of DDT and metabolites (DDXs). Concentrations of DDXs were highest, followed by PCBs, HCB, PBHDs, PBDEs and MeO-PBDEs. Levels of PCBs and PBDEs in blubber were lower than concentrations reported for harbour porpoises from the North Sea, while concentrations of DDXs were higher.     

Seismic analysis of a curved bridge considering deck‐abutment pounding interaction: an analytical investigation on the post‐impact response

Horizontal curved bridges are very common at intersections and at the changing angle of bridge alignment. Almost in every previous earthquake report, it can be seen that the columns of a curved segment experience torsional damage, and the curved decks are unseated from the abutment support. The main reason behind that phenomenon is the in‐plane deck rotation which results because of the complex dynamic coupling between two longitudinal directional vibrations. The curved decks are susceptible to deck rotation because in a curved segment, the centre of mass and the centre of stiffness generally lie outside the bridge deck and are not located at the same point. The pounding with the abutment often increases the rotational tendency of the deck. In this paper, a classical mechanics‐based approach is adopted to analytically estimate the deck rotation potential of curved bridge considering the deck‐abutment pounding interaction. The deck‐abutment pounding is modelled using non‐smooth techniques considering the Newton's impact law in the normal and Coulomb's friction in the tangential direction. Within the scope of this paper, a parametric study is performed to get the ideal combination of the column and bent arrangement and the gap distance. Copyright © 2016 John Wiley & Sons, Ltd.     

Sediment and hydro biogeochemistry of Lake Nainital, Kumaun Himalaya, India

The picturesque Nainital Lake, in the Uttarakhand state of India, is one of the major tourist attractions in the northern part of India. The increasing tourism and population around these lakes are a major concern for the ecology and good sustenance of the lakes. The present study is aimed to understand the behaviour of nutrients and metals in the sediment and their association with chemical forms in the lake. The study was accomplished by studying the water, interstitial water and sediments for major oxides, nutrients and metals in the lake. The different chemical forms of phosphorus and metals in the sediments were done using sequential extraction procedures. The water chemistry (Ca + Mg:Na + K) and the sediment chemistry (CIA and Al₂O₃/K₂O) show that the rocks in the catchment area play an important role in the geochemistry of the lake. The metals in the water also show that the Tallital basin is more polluted than the Mallital basin, may be due to the influence of Bus station. The high concentration of chloride, NH₄, SO₄ and metals in the sediment water interface and the interstitial water shows denitrification, sulfidisation and sulfide oxidation in the anoxic bottom water. The sediment composition shows that the phosphorus in the water is sequestered as carbonate flour apatite, and the metals precipitate as carbonate. The geo- accumulation index shows that the metals zinc, cobalt and nickel show moderate polluted nature than other metals. In general, the lake is less affected by anthropogenic activities. The chemical processes undergoing within the lake, like sulfidisation and sulfide oxidation, oxide dissolution and denitrification and organic matter degradation play an important role in the remobilization of the metals from the lake sediments.     

Generation of ionospheric irregularities by thermal-source: A new mechanism

A new mechanism for the generation of ionospheric irregularities of scale sizes of the order of 100 m or more, has been developed on the basis of thermal energy source due to collisional current dissipation. The important role is played by the diffusion of particles along and across the magnetic field. The threshold condition for the instability has been obtained and it is shown that these irregularities can be generated in the F-region height of auroral ionosphere when the electric field is enhanced to about 10 mV m^?1.     

Understanding of the biochemical events in a chemo-bioreactor during continuous acid mine drainage treatment

Spent mushroom compost (SMC) is widely used as reactor matrix in passive bioreactor involving sulfate reducing bacteria (SRB) for acid mine drainage (AMD) treatment. Follow-up our previous report, recent work has been established the extent of activity, sustained organic carbon availability, and the biochemical events of successive alkalinity producing system-based chemo-bioreactor for continuous performance using SMC. Removal of iron and sulfate from influent was over 77 and 90%, respectively, for first 13 weeks, while sulfate removal efficiency suddenly dropped down to 31% thereafter. Ahead of 13th week, process failure was beginning to be noticed when available dissolved organic carbon (DOC) value dropped down to 50 mg/L. SRB population was mostly affected with DOC drought at this stage. Sulfur was one of the major elements found with other tested metals in blackish green effluent precipitate. Sulfide compounds of the tested metals were formed on both exhausted chemo-bioreactor bed and precipitate. FTIR analysis indicated that SMC was responsible for metal binding and available nutrients supply. The present study revealed the feasibility of SMC as a host for treating AMD by this chemo-bioreactor that will assist in designing the continuous treatment practice.