In-orbit Performance of UVIT and First Results

The performance of the ultraviolet telescope (UVIT) on-board AstroSat is reported. The performance in orbit is also compared with estimates made from the calibrations done on the ground. The sensitivity is found to be within \(\sim \)15% of the estimates, and the spatial resolution in the NUV is found to exceed significantly the design value of \(1.8^{\prime \prime }\) and it is marginally better in the FUV. Images obtained from UVIT are presented to illustrate the details revealed by the high spatial resolution. The potential of multi-band observations in the ultraviolet with high spatial resolution is illustrated by some results.     

Cosmic rays from remnants of quasars?

Considerations of the collision losses for protons traversing the 2.7-K blackbody microwave radiation field have led to the conclusion that the highest energy cosmic rays, those observed at ≥10²⁰ eV, must come from sources within the present epoch. In light of this constraint, it is here suggested that these particles may be accelerated near the event horizons of spinning supermassive black holes associated with presently inactive quasar remnants. The required emf is generated by the black hole induced rotation of externally supplied magnetic field lines threading the horizon. Producing the observed flux of the highest energy cosmic rays would constitute a negligible drain on the black hole dynamo. Observations with upcoming air shower arrays and space missions may lead to the identification of candidate dormant galaxies that harbour such black holes. Although the highest energy events observed so far are accounted for within the context of this scenario, a spectral upper bound at ∼10²¹ eV is expected since the acceleration to higher energies appears to be precluded, on general grounds.     

Swarms in Andaman Sea,India — a seismotectonic analysis

The seismotectonic characteristics of 1983–1984, 1993 and 2005 swarms in Andaman Sea are analysed. These swarms are characterised by their typical pulsating nature, oval shaped geometry and higher b values. The migration path of the swarms from north to south along the Andaman Spreading Ridge is documented. While the first two swarms are located along existing mapped rift segments, the 2005 swarm appears to have generated a new rift basin along 8°N. The analysis and supporting evidences suggest that these swarms were generated by intruding magmatic dyke along the weak zones in the crust, followed by rifting, spreading and collapse of rift walls. CMT solutions for 2005 swarm activity indicate that intrusion of magmatic dyke in the crustal weak zone is documented by earthquakes showing strike slip solution. Subsequent events with normal fault mechanism corroborate the rift formation, collapse and its spreading.     

On the application of the classic Kessler and Berry schemes in Large Eddy Simulation models with a particular emphasis on cloud autoconversion, the onset time of precipitation and droplet evaporation

Many Large Eddy Simulation (LES) models use the classic Kessler parameterisation either as it is or in a modified form to model the process of cloud water autoconversion into precipitation. The Kessler scheme, being linear, is particularly useful and is computationally straightforward to implement. However, a major limitation with this scheme lies in its inability to predict different autoconversion rates for maritime and continental clouds. In contrast, the Berry formulation overcomes this difficulty, although it is cubic. Due to their different forms, it is difficult to match the two solutions to each other. In this paper we single out the processes of cloud conversion and accretion operating in a deep model cloud and neglect the advection terms for simplicity. This facilitates exact analytical integration and we are able to derive new expressions for the time of onset of precipitation using both the Kessler and Berry formulations. We then discuss the conditions when the two schemes are equivalent. Finally, we also critically examine the process of droplet evaporation within the framework of the classic Kessler scheme. We improve the existing parameterisation with an accurate estimation of the diffusional mass transport of water vapour. We then demonstrate the overall robustness of our calculations by comparing our results with the experimental observations of Beard and Pruppacher, and find excellent agreement.     

Risk minimization in water quality control problems of a river system

Methodologies are presented for minimization of risk in a river water quality management problem. A risk minimization model is developed to minimize the risk of low water quality along a river in the face of conflict among various stake holders. The model consists of three parts: a water quality simulation model, a risk evaluation model with uncertainty analysis and an optimization model. Sensitivity analysis, First Order Reliability Analysis (FORA) and Monte–Carlo simulations are performed to evaluate the fuzzy risk of low water quality. Fuzzy multiobjective programming is used to formulate the multiobjective model. Probabilistic Global Search Laussane (PGSL), a global search algorithm developed recently, is used for solving the resulting non-linear optimization problem. The algorithm is based on the assumption that better sets of points are more likely to be found in the neighborhood of good sets of points, therefore intensifying the search in the regions that contain good solutions. Another model is developed for risk minimization, which deals with only the moments of the generated probability density functions of the water quality indicators. Suitable skewness values of water quality indicators, which lead to low fuzzy risk are identified. Results of the models are compared with the results of a deterministic fuzzy waste load allocation model (FWLAM), when methodologies are applied to the case study of Tunga–Bhadra river system in southern India, with a steady state BOD–DO model. The fractional removal levels resulting from the risk minimization model are slightly higher, but result in a significant reduction in risk of low water quality.     

Can an annual flood induce changes in channel geomorphology?

The present study has been a pioneering effort examining the role of an annual flood as a potent stimulus inducing changes in channel geomorphology of the Mayurakshi River, India. Twenty cross sections have been considered for the measurement of various hydro-geomorphic attributes of the river in both the pre- and post-flood conditions in 2018. The study sensed an escalating trend for channel width, width/depth ratio, and wetted perimeter while the reverse was also detected for average depth, maximum depth, cross-sectional area, and hydraulic radius. For example, the width/depth ratio recorded an increase of?~?11%, and the hydraulic radius depicted a decrease of?~?8%. Furthermore, channel asymmetry, bed asymmetry and bed relief index experienced a decrease after the flood. The sudden hydraulic impulse during monsoon flood as manifested in velocity, discharge, specific stream power, Reynolds number, Froude number increases the erosivity of the fluid. Besides the hydraulic factors, bank material (massive sandbank susceptible to hydraulic action and mixed bank constituted by alternate bands of sand and silt, and vulnerable to failure by piping action) brings substantial changes in channel morphology. Moreover, anthropogenic interventions such as sand mining are found to play a significant role in channel behaviour. The role of the multiple factors driving the morphological changes of the cross sections has been unpacked using canonical component analysis.

     

C-O bonds in carbonate minerals: A new kind of paleothermometer

The abundance of the doubly substituted CO₂ isotopologue, ¹³C¹⁸O¹⁶O, in CO₂ produced by phosphoric acid digestion of synthetic, inorganic calcite and natural, biogenic aragonite is proportional to the concentration of ¹³C-¹⁸O bonds in reactant carbonate, and the concentration of these bonds is a function of the temperature of carbonate growth. This proportionality can be described between 1 and 50 °C by the function: Δ₄₇ = 0.0592 · 10⁶ · T⁻² − 0.02, where Δ₄₇ is the enrichment, in per mil, of ¹³C¹⁸O¹⁶O in CO₂ relative to the amount expected for a stochastic (random) distribution of isotopes among all CO₂ isotopologues, and T is the temperature in Kelvin. This relationship can be used for a new kind of carbonate paleothermometry, where the temperature-dependent property of interest is the state of ordering of ¹³C and ¹⁸O in the carbonate lattice (i.e., bound together vs. separated into different CO₃²⁻ units), and not the bulk δ¹⁸O or δ¹³C values. Current analytical methods limit precision of this thermometer to ca. ± 2 °C, 1σ. A key feature of this thermometer is that it is thermodynamically based, like the traditional carbonate-water paleothermometer, and so is suitable for interpolation and even modest extrapolation, yet is rigorously independent of the δ¹⁸O of water and δ¹³C of DIC from which carbonate grew. Thus, this technique can be applied to parts of the geological record where the stable isotope compositions of waters are unknown. Moreover, simultaneous determinations of Δ₄₇ and δ¹⁸O for carbonates will constrain the δ¹⁸O of water from which they grew.     

Seismic stability of two interconnected steel structures freely standing on the floor

Nuclear fuel fabrication and reprocessing facilities have glove boxes that are extensively used as a primary containment for radiological material. These equipment are maintained under negative pressure using ventilation system and possess high degree of leak tightness. Sometimes, they are used as a standalone structure and many a times, interconnected to each other. Normally, they are not anchored to the floor, which raises serious concerns about their seismic performance. To check seismic stability of the glove boxes and evaluate safety margins in design, tri directional fullscale shake table experiments of two interconnected glove boxes had been carried out. Two configurations were compared; in first, both the boxes were connected through flexible linkage (material transfer tunnel) and in second both were rigidly connected via structural members. Objective of experiments was to observe effects of seismic excitation on leak tightness, structural integrity and overall stability of two interconnected glove boxes. Subsequently, nonlinear finite element analysis was carried out to establish and develop analysis methodology. Experimental results were utilized for model benchmarking. Furthermore, a numerical method was developed to determine safe upper bounds on sliding displacements. This paper highlighted critical findings emanated from experimental results and examined their effect on seismic stability. Enhanced seismic stability in case of rigidly connected boxes was observed. Rigid body motions (mainly sliding and low magnitude rocking) dominated the response with very limited effect of elastic motions. Methodology used for modelling and analyzing glove boxes under seismic loading using finite element methods was also presented.     

Turbulence in mobile-bed streams

This study is devoted to quantify the near-bed turbulence parameters in mobile-bed flows with bed-load transport. A reduction in near-bed velocity fluctuations due to the decrease of flow velocity relative to particle velocity of the transporting particles results in an excessive near-bed damping in Reynolds shear stress (RSS) distributions. The bed particles are associated with the momentum provided from the flow to maintain their motion overcoming the bed resistance. It leads to a reduction in RSS magnitude over the entire flow depth. In the logarithmic law, the von Kármán coefficient decreases in presence of bed-load transport. The turbulent kinetic energy budget reveals that for the bed-load transport, the pressure energy diffusion rate near the bed changes sharply to a negative magnitude, implying a gain in turbulence production. According to the quadrant analysis, sweep events in mobile-bed flows are the principal mechanism of bed-load transport. The universal probability density functions for turbulence parameters given by Bose and Dey have been successfully applied in mobile-bed flows.