Sedimentologic attributes of the Proterozoic siliciclastic packages of the Garhwal–Kumaun Lesser Himalaya,India: Implication for their relationship and palaeobasinal conditions

The present work addresses the long-standing issues on the characterization aspect of the Proterozoic siliciclastic successions exposed in the central part of the Lesser Himalaya, restricted between the Main Boundary Thrust (MBT) and the Main Central Thrust (MCT). Geologic, sedimentologic, and petrographic study divides the Lesser Himalaya in two zones- northern Palaeo- Mesoproterozoic Inner Lesser Himalayan (ILH) and southern Neoproterozoic Outer Lesser Himalayan (OLH) zones. The major lithofacies recognized from the zones are - (i) coarse grained siliciclastic (CGS), (ii) interbedded medium and fine-grained siliciclastic (IMFS), (iii) argillite (ARG), and (iv) siliciclastic–argillite rhythmites (SAR). Amongst all these facies, the nearshore IMFS facies shows consistent presence in both OLH and ILH zones. From the facies distribution pattern, a northwest–southeasterly trending palaeo- shoreline has been envisaged. The CGS facies in the ILH hints towards an alluvial fan setting during 1.8 Ga rifting phase associated with penecontemporaneous basic magmatism. Compositionally, the siliciclastics of both the zones (ILH and OLH) are arenite and wacke types with minimal variation in their detrital proportions, derived from the early Proterozoic (between 2.4-1.6Ga) Aravalli-Delhi Supergroup provenance. Nearly matching types and content of detrital modes and the lithofacies pattern of the ILH and OLH siliciclastics probably conclude the derivation from the rising (nearby) Aravalli-Delhi orogen and deposition in a foreland like situation.     

A numerical method for the solution of the nonlinear turbulent one-dimensional free surface flow equations

Free surface flow of an incompressible fluid over a shallow plane/undulating horizontal bed is characteristically turbulent due to disturbances generated by the bed resistance and other causes. The governing equations of such flows in one dimension, for finite amplitude of surface elevation over the bed, are the Continuity Equation and a highly nonlinear Momentum Equation of order three. The method developed in this paper introduces the “discharge” variable q = η U, where η = elevation of the free surface above the bed level, and U = average stream-wise forward velocity. By this substitution, the continuity equation becomes a linear first-order PDE and the momentum equation is transformed after introduction of a small approximation in the fifth term. Next, it is shown by an invertibility argument that q can be a function of η: q = F(η), rendering the momentum equation as a first order, second degree ODE for F(η), that can be be integrated by the Runge-Kutta method. The continuity equation then takes the form of a first order evolutionary PDE that can be integrated by a Lax-Wendroff type of scheme for the temporal evolution of the surface elevation η. The method is implemented for two particular cases: when the initial elevation is triangular with vertical angle of 120 ^° and when it has a sinusoidal form. The computations exhibit the physically interesting feature that the frontal portion of the propagating wave undergoes a sharp jump followed by tumbling over as a breaker. Compared to other discretization methods, the application of the Runge-Kutta and an extended version of the Lax-Wendroff scheme is much easier.     

RS & GIS-based landslide susceptibility mapping of the Balason River basin,Darjeeling Himalaya,using logistic regression (LR) model

The present study deals with the preparation of a landslide susceptibility map of the Balason River basin, Darjeeling Himalaya, using a logistic regression model based on Geographic Information System and Remote Sensing. The landslide inventory map was prepared with a total of 295 landslide locations extracted from various satellite images and intensive field survey. Topographical maps, satellite images, geological, geomorphological, soil, rainfall and seismic data were collected, processed and constructed into a spatial database in a GIS environment. The chosen landslide-conditioning factors were altitude, slope aspect, slope angle, slope curvature, geology, geomorphology, soil, land use/land cover, normalised differential vegetation index, drainage density, lineament number density, distance from lineament, distance to drainage, stream power index, topographic wetted index, rainfall and peak ground acceleration. The produced landslide susceptibility map satisfied the decision rules and ?2 Log likelihood, Cox &; Snell R-Square and Nagelkerke R-Square values proved that all the independent variables were statistically significant. The receiver operating characteristic curve showed that the prediction accuracy of the landslide probability map was 96.10%. The proposed LR method can be used in other hazard/disaster studies and decision-making.     

Automatic Delineation of Structural Boundaries using Curvature Analysis of Bouguer Gravity Data in Parts of Northwest Himalaya

Curvature describes about the bending of surface by which a surface deviates from flat plane or a curve deviates from straight. The Himalaya has numerous geodynamic features with complex geological setup and extreme undulating topography. In this context, interpretation of gravity data has been used for enhancing important features to delineate structural trend for understanding thrust-fault locations and crustal structural setup in north-west Himalaya. Gravity data interpretation not only help to study varying lateral changes in density with lithological changes but also properties of gradients to interpret sub-surface structure and edges of the geological features. Attempt has been made to interpret various curvatures analysis like maximum, minimum, most-positive and most-negative curvatures using Bouguer gravity data to estimate the automatic thrust-fault locations in Dehradun-Badrinath area falling in the north-western part of Himalaya, India.     

Application of analytical hierarchy process (AHP) for flood risk assessment: a case study in Malda district of West Bengal,India

A field experiment was conducted from 2 May 2010 to 1 May 2012 in the Gurbantunggut Desert, the second largest desert in China, to investigate saltation activity and its threshold velocity, and their relations with atmospheric and soil conditions. The results showed that saltation activity occurred more frequently during 08:00–20:00 Local Standard Time in spring and summer, with air temperatures between 20.0 and 29.0 °C, water vapor pressures between 0.6 and 0.9 kPa, soil temperatures between 25.0 and 30.0 °C, and a soil moisture lower than 0.04 m³/m³. At 2 m height, the saltation threshold velocity varied between 11.1 and 13.9 m/s, with a mean of 12.5 m/s. Threshold velocity showed clear seasonal variations in the following sequence: spring (11.7 m/s) < autumn (12.7 m/s) < summer (13.6 m/s). Affected by soil conditions, aeolian sand transport was weak, with an average annual aeolian sand that transported across a section (1.0 m × 2.0 m) of less than 6.0 kg.     

Effective medium modeling to assess gas hydrate and free-gas evident from the velocity structure in the Makran accretionary prism, offshore Pakistan

Seismic properties of sediments are strongly influenced by pore fluids. Stiffness of unconsolidated marine sediment increases with the presence of gas hydrate and decreases with the presence of gas. A strong bottom-simulating reflector (BSR) observed on a seismic profile in the Makran accretionary prism, offshore Pakistan, indicates the presence of gas hydrate and free-gas across the BSR. Elastic properties of gas depend largely on pressure and temperature. We, therefore, first determine the elastic modulus of gas at pressure and temperature calculated at the BSR depth in the study region. The interval velocities derived from the seismic data are interpreted by the effective medium theory, which is a combination of self-consistent approximation and differential effective medium theories, together with a smoothing approximation, for assessment of gas hydrate and free-gas. The results show the saturations of gas hydrate and free-gas as 22 and 2.4% of pore space, respectively, across the BSR.     

Classification of glacial lakes using integrated approach of DFPS technique and gradient analysis using Sentinel 2A data

It is important to identify and locate glacial lakes for assessing any potential hazard. This study presents a combination of semi-automatic method Double-Window Flexible Pace Search (DFPS) and edge detection technique to identify glacial lakes using Sentinel 2A satellite data. Initially, Normalized Difference Water Index (NDWI) has been used to identify water and non-water areas, while DFPS and Edge detection technique has been used to identify an optimum threshold value to distinguish between water and shadow areas. The optimal threshold from DFPS process is 0.21, while threshold value of gradient magnitude using edge detection process is 0.318. The number of glacial lakes identified using the above algorithm is in close agreement with previously published results on glacial lakes in Gangotri glacier using different techniques. Thus, a combination of DFPS and edge detection process has successfully segregated glacial lakes from other features present in Gangotri glacier.