The radio properties of radio-quiet quasars

Although radio-quiet quasars (RQQs) constitute ≳ 90 per cent of optically identified quasar samples, their radio properties are only poorly understood. In this paper we present the results of a multi-frequency VLA study of 27 low-redshift RQQs. We detect radio emission from 20 objects, half of which are unresolved (≤ 0.24 arcsec). In cases where significant structure can be resolved, double, triple and linear radio sources on scales of a few kpc are found. The radio emission (typically) has a steep spectrum (α ∼ 0.7, where S  ∝ ν^−α), and high brightness temperatures ( T _B ≥ 10⁵ K) are measured in some of the radio components. The RQQs form a natural extension to the radio luminosity–absolute magnitude distribution of nearby Seyfert 1s. We conclude that a significant fraction of the radio emission in RQQs originates in a compact nuclear source directly associated with the quasar. There are no significant differences between the radio properties of RQQs with elliptical hosts and those in disc galaxies within the current sample.     

Elevation of the olivine-spinel transition in subducted lithosphere: Seismic evidence

The top of the olivine-spinel phase change in subducted oceanic lithosphere can be located by the travel times of seismic waves which have propagated through the slab. P-wave travel-time residuals from deep earthquakes in the Tonga island are observed at Australian seismic stations are grouped according to the depth of the earthquake. The change in mean residual with a change in earthquake depth is related to the velocity contrast between slab and normal mantle at that depth. The curve mean residual versus earthquake depth displays a region of markedly increased slope between earthquake depths of about 250 and 350 km. The most probable explanation of this observation is an elevation by 100 km of the olivine-spinel phase change within the relatively cooler slab. No evidence was found for vertical displacements within the slab of any deeper phase changes.A temperature contrast between slab and normal mantle of about 1,000°C at 250 km depth is implied. This finding confirms current thermal models for subducted lithosphere but is inconsistent with the global intraplate stress field unless only a few percent of the negative buoyancy force at subduction zones is transmitted to the surface plates.     

Organic carbon isotope ratios of recent sediments from coastal lagoons of the Gulf of Mexico,Mexico

The stable carbon isotope composition sedimentary organic carbon was determined in the sediments of seven coastal lagoons of the Gulf of Mexico, Mexico. For most of the lagoons the δ¹³C values for sediments ranged from ?20.1 to ?23.9%. Anomalously low values, ?26.8 to 29.3%. were determined in sediments of two of the studied lagoons, probably due to the presence of organic carbon from anthropogenic sources, naturally absent in these environments. The δ¹³C values determined in the tissues of oysters collected at the same time in the different lagoons were very similar to those recorded in the sediments.     

A chart for designing modal analysis by point counting

Developing the work ofHasofer (1963) andSolomon (1963) concerning the factors controlling the precision of point counting, the authors have designed a chart to facilitate the choice of grid-spacing and sample area for individual minerals. After determining the grain radius, and making a rough estimate of the percentage of the mineral under investigation, suitable combinations of grid-spacing and number of counts can be rapidly determined from the chart.

---

Zusammenfassung Diese Arbeit stellt eine Weiterentwicklung derjenigen vonHasofer (1963) undSolomon (1963) dar, die sich mit den Faktoren befaßten, welche die Genauigkeit der Punktezählung bestimmen. Die Autoren haben eine Tabelle entworfen, welche die Wahl der graphostatischen Abstände und des Mustergebietes für einzelne Mineralien erleichtert.

---

Résumé Développant le travail deHasofer (1963) et deSolomon (1963) sur les facteurs qui déterminent la précision du compte par points, les auteurs ont élaboré un diagramme pour faciliter le choix du quadrillage et de la superficie d'essai pour des minéraux particuliers.

---

. , , .

     

Efficacy of a multi-metric fish index as an analysis tool for the transitional fish component of the Water Framework Directive

The WFD has introduced an international commitment to assess the ecological status of transitional waters (TWs), within which fish communities are a key biological monitoring component. The Transitional Fish Classification Index (TFCI) outlined in this paper uses 10 ecological measures to analyse fish populations caught from various ecological niches using a variety of gear types within the Thames estuary. These reach and method-specific communities are then compared to a reference population created from a 'healthy' population from TWs of a similar type. The results indicate a progressive downstream increase the quality of fish communities, consistent with previous work; variation between methods can be accounted for by gear selectivity. Overall, the TFCI is an effective communication tool for converting ecological information into an easily understood format for managers, policy makers and the general public.     

Benthic meiofauna community composition at polluted and non-polluted sites in New Zealand intertidal environments

Meiofauna composition was investigated for six field sites, including polluted and non-polluted sites, within two regions (Auckland and Bay of Plenty) during winter (July-August 2004) in the North Island of New Zealand. Physico-chemical parameters were measured during the sampling period and meiofauna distribution and abundance were compared with these measured parameters. Analysis of meiofauna abundance indicated that foraminiferans, nematodes and ostracods were the taxa that contributed to the variability between field sites within the Auckland region. However, no clear taxa dominance was seen in the Bay of Plenty region. Comparison of meiofauna abundance and physico-chemical parameters was done using multivariate analysis (PRIMER). However, no clear relationships between the parameters were observed in any field site in either region. The Shannon-Weiner index of diversity did not show any clear differentiation between polluted and non-polluted field sites. Therefore, from the present study, the taxa or physico-chemical parameters used could not effectively characterise pollution at the investigated field sites.     

The Quaternary history of the Wash fluvial network, UK

This paper appraises and compares the Middle-Upper Pleistocene sedimentary sequences preserved in the fluvial systems draining into the Fenland Basin and the Wash estuary. Of the main Fenland rivers the longest records, which extend back to the initial Anglian (glacial) formation of the basin, are found in the Great Ouse and its tributaries, particularly the Cam and the Nar. These sequences preserve sediments representing all four post-Anglian interglacials. The Nene also has an extensive post-Anglian history, with evidence for a Hoxnian estuary that is presumed to have been the precursor of the Wash. North of the Nene, however, the Welland and Witham (proto-Trent) have relatively short sequences, which are thought to commence with a later (post-Anglian-pre-Devensian) glaciation that affected Lincolnshire and fed the previously-recognized Tottenhill outwash delta south of Kings Lynn. Prior to Devensian deglaciation the Witham valley was occupied by the Trent, which was the trunk river of the late Middle Pleistocene Wash system. During periods of low sea level the river would have extended north-eastwards across what is now the floor of the North Sea, possibly via the Inner Silver Pit. Several of the central Fenland sequences show evidence of infrequent terrace formation during the late Quaternary, although this might in part be due to poor vertical separation between terraces, so that differentiating them has been difficult; this has been exacerbated by mixed biostratigraphical signals due to the preservation of sediments representing more than one interglacial beneath a single terrace surface. In several of the systems there is evidence for valley rejuvenation to the lowest terrace or valley-floor level during the MIS 4-3 transition. The observed differences within what, during the predominant periods of lower sea level, would have been a single Wash river system are difficult to explain.     

Towards a volcanic–structural balance: relative importance of volcanism, folding, and remobilisation of nickel sulphides at the Perseverance Ni–Cu–(PGE) deposit, Western Australia

Perseverance is a world-class, komatiite-hosted nickel sulphide deposit situated in the well-endowed Leinster nickel camp of the Agnew–Wiluna greenstone belt, Western Australia. The mine stratigraphy at Perseverance trends north-northwest (NNW), dips steeply to the west, and is overturned. Stratigraphic footwall units lie along the western margin of the Perseverance Ultramafic Complex (PUC). The PUC comprises a basal nickel sulphide-bearing orthocumulate- to mesocumulate-textured komatiite that is overlain by a thicker, nickel sulphide-poor, dunite lens. Hanging wall rocks include rhyodacite that is texturally and compositionally similar to footwall volcanic rocks. These rocks separate the PUC from a second sequence of nickeliferous, E-facing, spinifex-textured komatiite units (i.e. the East Perseverance komatiite). Past workers argue for a conformable stratigraphic contact between the PUC and the East Perseverance komatiite and conclude that the PUC is extrusive. This study, however, clearly demonstrates that these komatiite sequences are discordant, implying that the PUC may have intruded rhyodacite country rock as a sill with subsequent structural juxtaposition against the East Perseverance komatiite. Early N–S shortening associated with the regional D_I deformation event (corresponding to the local D_P1 to D_P3 events at Perseverance) resulted in the heterogeneous partitioning of strain along the margins of the competent dunite. A mylonite developed in the more ductile footwall rocks along the footwall margin of the PUC, while isoclinal F₃ folds, such as the Hanging wall limb and Felsic Nose folds, formed in low-mean stress domains along the fringes of the elongated dunite lens. Strata-bound massive and disseminated nickel sulphides were passively fold thickened in hinge areas of isoclinal folds, whereas basal massive sulphides lubricated fold limbs and promoted thrust movement along shallowly dipping lithological contacts. Massive sulphides were physically remobilised up to 20 m from their primary footwall position into deposit-scale fold hinges to form the 1A and Felsic Nose orebodies. First-order controls on the geometry of the Perseverance deposit include the thermomechanical erosion of footwall rocks and the channelling of the mineralised komatiitic magma. Second- or third-order controls are several postvolcanic deformation events, which resulted in the progressive folding and shearing of the footwall contact, as well as the passive fold thickening of massive and disseminated sulphide orebodies. Massive sulphides were physically remobilised into multiple generations of fold hinges and shear zones. Important implications for near-mine exploration in the Leinster camp include identifying nickeliferous komatiite units, defining their three-dimensional geometry, and targeting fold hinge areas. Fold plunge directions and stretching lineations are indicators of potential plunge directions of massive sulphide orebodies.