Spatially discontinuous modern sedimentation in Georgian Bay, Huron Basin, Great Lakes

High-resolution seismic reflection profile data show that the modern sediment cover (over the last 150 years) in Georgian Bay is thin and spatially discontinuous. Sediments rich in ragweed pollen, largely derived from siltation linked to land clearing and European settlement, form a thin, discontinuous veneer on the lakebed. Much of the lakebed consists of exposed sediments deposited during the late glacial or early postglacial. Accumulation rates of modern sediments range from < 0 mm/year (net erosion) to ∼3.2 mm/year, often within a few hundred metres spatially. These rates are much lower than those reported for the main basin of Lake Huron and the other Great Lakes, and are attributed to the low sediment supply. Only a few small rivers flow into Georgian Bay, and most of the basin is surrounded by bedrock of Precambrian gneiss and granite to the east, and Silurian dolostone, limestone and shale to the west. Thick deposits of Pleistocene drift, found on the Georgian Bay shoreline only between Meaford and Port Severn, are the main sediment source for the entire basin at present. Holocene to modern sediments are even absent from some deep basins of Georgian Bay. These findings have implications for the ultimate fate of anthropogenic contaminants in Georgian Bay. While microfossil assemblages in the ragweed-rich sediments record increased eutrophication over the last 150 years, most pollutants generated in the Georgian Bay catchment are not accumulating on the lakebed and are probably exported from the Bay.     

An overview of toxicant identification in sediments and dredged materials

The identification of toxicants affecting aquatic benthic systems is critical to sound assessment and management of our nation's waterways. Identification of toxicants can be useful in designing effective sediment remediation plans and reasonable options for sediment disposal. Knowledge of which contaminants affect benthic systems allows managers to link pollution to specific dischargers and prevent further release of toxicant(s). In addition, identification of major causes of toxicity in sediments may guide programs such as those developing environmental sediment guidelines and registering pesticides, while knowledge of the causes of toxicity which drive ecological changes such as shifts in benthic community structure would be useful in performing ecological risk assessments. To this end, the US Environmental Protection Agency has developed tools (toxicity identification and evaluation (TIE) methods) that allow investigators to characterize and identify chemicals causing acute toxicity in sediments and dredged materials. To date, most sediment TIEs have been performed on interstitial waters. Preliminary evidence from the use of interstitial water TIEs reveals certain patterns in causes of sediment toxicity. First, among all sediments tested, there is no one predominant cause of toxicity; metals, organics, and ammonia play approximately equal roles in causing toxicity. Second, within a single sediment there are multiple causes of toxicity detected; not just one chemical class is active. Third, the role of ammonia is very prominent in these interstitial waters. Finally, if sediments are divided into marine or freshwater, TIEs perforMed on interstitial waters from freshwater sediments indicate a variety of toxicants in fairly equal proportions, while TIEs performed on interstitial waters from marine sediments have identified only ammonia and organics as toxicants, with metals playing a minor role. Preliminary evidence from whole sediment TIEs indicates that organic compounds play a major role in the toxicity of marine sediments, with almost no evidence for either metal or ammonia toxicity. However, interpretation of these results may be skewed because only a small number of interstitial water (n = 13) and whole sediment (n = 5) TIEs have been completed. These trends may change as more data are collected.     

Towards a volcanic–structural balance: relative importance of volcanism, folding, and remobilisation of nickel sulphides at the Perseverance Ni–Cu–(PGE) deposit, Western Australia

Perseverance is a world-class, komatiite-hosted nickel sulphide deposit situated in the well-endowed Leinster nickel camp of the Agnew–Wiluna greenstone belt, Western Australia. The mine stratigraphy at Perseverance trends north-northwest (NNW), dips steeply to the west, and is overturned. Stratigraphic footwall units lie along the western margin of the Perseverance Ultramafic Complex (PUC). The PUC comprises a basal nickel sulphide-bearing orthocumulate- to mesocumulate-textured komatiite that is overlain by a thicker, nickel sulphide-poor, dunite lens. Hanging wall rocks include rhyodacite that is texturally and compositionally similar to footwall volcanic rocks. These rocks separate the PUC from a second sequence of nickeliferous, E-facing, spinifex-textured komatiite units (i.e. the East Perseverance komatiite). Past workers argue for a conformable stratigraphic contact between the PUC and the East Perseverance komatiite and conclude that the PUC is extrusive. This study, however, clearly demonstrates that these komatiite sequences are discordant, implying that the PUC may have intruded rhyodacite country rock as a sill with subsequent structural juxtaposition against the East Perseverance komatiite. Early N–S shortening associated with the regional D_I deformation event (corresponding to the local D_P1 to D_P3 events at Perseverance) resulted in the heterogeneous partitioning of strain along the margins of the competent dunite. A mylonite developed in the more ductile footwall rocks along the footwall margin of the PUC, while isoclinal F₃ folds, such as the Hanging wall limb and Felsic Nose folds, formed in low-mean stress domains along the fringes of the elongated dunite lens. Strata-bound massive and disseminated nickel sulphides were passively fold thickened in hinge areas of isoclinal folds, whereas basal massive sulphides lubricated fold limbs and promoted thrust movement along shallowly dipping lithological contacts. Massive sulphides were physically remobilised up to 20 m from their primary footwall position into deposit-scale fold hinges to form the 1A and Felsic Nose orebodies. First-order controls on the geometry of the Perseverance deposit include the thermomechanical erosion of footwall rocks and the channelling of the mineralised komatiitic magma. Second- or third-order controls are several postvolcanic deformation events, which resulted in the progressive folding and shearing of the footwall contact, as well as the passive fold thickening of massive and disseminated sulphide orebodies. Massive sulphides were physically remobilised into multiple generations of fold hinges and shear zones. Important implications for near-mine exploration in the Leinster camp include identifying nickeliferous komatiite units, defining their three-dimensional geometry, and targeting fold hinge areas. Fold plunge directions and stretching lineations are indicators of potential plunge directions of massive sulphide orebodies.     

X-ray and ultraviolet observations of the dwarf nova VW Hyi in quiescence

We present an analysis of X-ray and ultraviolet (UV) data of the dwarf nova VW Hyi that were obtained with XMM–Newton during the quiescent state. The X-ray spectrum indicates the presence of an optically thin plasma in the boundary layer that cools as it settles on to the white dwarf. The plasma has a continuous temperature distribution that is well described by a power law or a cooling flow model with a maximum temperature of 6–8 keV. We estimate from the X-ray spectrum a boundary layer luminosity of  8 × 10³⁰ erg s^-1  , which is only 20 per cent of the disc luminosity. The rate of accretion on to the white dwarf is  5 × 10⁻¹² M_⊙ yr⁻¹  , about half of the rate in the disc. From the high-resolution X-ray spectra, we estimate that the X-ray emitting part of the boundary layer is rotating with a velocity of 540 km s⁻¹, which is close to the rotation velocity of the white dwarf but is significantly smaller than the Keplerian velocity. We detect a 60-s quasi-periodic oscillation of the X-ray flux, which is likely to be due to the rotation of the boundary layer. The X-ray and the UV flux show strong variability on a time-scale of ∼1500 s. We find that the variability in the two bands is correlated and that the X-ray fluctuations are delayed by ∼100 s. The correlation indicates that the variable UV flux is emitted near the transition region between the disc and the boundary layer and that accretion rate fluctuations in this region are propagated to the X-ray emitting part of the boundary layer within ∼100 s. An orbital modulation of the X-ray flux suggests that the inner accretion disc is tilted with respect to the orbital plane. The elemental abundances in the boundary layer are close to their solar values.     

Elucidation of the Alum Shale kerogen structure using a multi-disciplinary approach

The significance and validity of integrating data obtained from a variety of analytical techniques to understand, elucidate and model kerogen's complex chemical structure is reported here using degradative (open and closed system pyrolysis, chemical oxidation), non-degradative (¹³C CP/MAS NMR) and optical (incident white light and blue light) methods. Seven Cambrian Alum Shale samples, ranging in maturity from immature to post-mature with respect to petroleum generation, were studied and were chosen for their simple geological history, uniform organic matter type and high organic carbon content. The Alum Shale kerogens, which primarily consist of algal organic matter, liberate low molecular weight gaseous and aromatic compounds on pyrolysis and give mostly branched dicarboxylic acids on chemical oxidation. ¹³C NMR spectroscopy shows that the Alum Shale kerogens are anomalously rich in oxygen-bearing functional groups (such as C = O, ArCO, CHO, CH_xO), most of which apparently remain intact within the kerogen macro-molecule (KMM) through the diagenetic and catagenetic stages. Fragments released by different degradative techniques are quantified and the aromaticity (f_a), O/C and relative proportions of various carbon types estimated by ¹³C NMR. A synthesis of these data has allowed us to better understand the chemistry of the Alum Shale kerogen.     

Flood seasonality across Scandinavia—Evidence of a shifting hydrograph?

Fluvial flood events have substantial impacts on humans, both socially and economically, as well as on ecosystems (e.g., hydroecology and pollutant transport). Concurrent with climate change, the seasonality of flooding in cold environments is expected to shift from a snowmelt‐dominated to a rainfall‐dominated flow regime. This would have profound impacts on water management strategies, that is, flood risk mitigation, drinking water supply, and hydro power. In addition, cold climate hydrological systems exhibit complex interactions with catchment properties and large‐scale climate fluctuations making the manifestation of changes difficult to detect and predict. Understanding a possible change in flood seasonality and defining related key drivers therefore is essential to mitigate risk and to keep management strategies viable under a changing climate. This study explores changes in flood seasonality across near‐natural catchments in Scandinavia using circular statistics and trend tests. Results indicate strong seasonality in flooding for snowmelt‐dominated catchments with a single peak occurring in spring and early summer (March through June), whereas flood peaks are more equally distributed throughout the year for catchments located close to the Atlantic coast and in the south of the study area. Flood seasonality has changed over the past century seen as decreasing trends in summer maximum daily flows and increasing winter and spring maximum daily flows with 5–35% of the catchments showing significant changes at the 5% significance level. Seasonal mean daily flows corroborate those findings with higher percentages (5–60%) of the catchments showing statistically significant changes. Alterations in annual flood occurrence also point towards a shift in flow regime from snowmelt‐dominated to rainfall‐dominated with consistent changes towards earlier timing of the flood peak (significant for 25% of the catchments). Regionally consistent patterns suggest a first‐order climate control as well as a local second‐order catchment control, which causes inter‐seasonal variability in the streamflow response.     

Exploring hydroclimatic change disparity via the Budyko framework

The Budyko framework characterizes landscape water cycles as a function of climate. We used this framework to identify regions with contrasting hydroclimatic change during the past 50 years in Sweden. This analysis revealed three distinct regions: the mountains, the forests, and the areas with agriculture. Each region responded markedly different to recent climate and anthropogenic changes, and within each region, we identified the most sensitive subregions. These results highlight the need for regional differentiation in climate change adaptation strategies to protect vulnerable ecosystems and freshwater resources. Further, the Budyko curve moved systematically towards its water and energy limits, indicating augmentation of the water cycle driven by changing vegetation, climate and human interactions. This finding challenges the steady state assumption of the Budyko curve and therefore its ability to predict future water cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Nearshore bar migration and sediment-induced buoyancy effects

A 1-D General Ocean Turbulence Model that includes the effects of sediment-induced stratification is shown to simulate the observed onshore and offshore migration of a nearshore sandbar. The only two free parameters of the model, the bed reference concentration and the sediment diffusivity, are taken from the literature, rather than tuned to the data used here. The model results suggest that predictions of onshore bar migration, in which wave-induced sediment transport confined to within a few centimeters of the bottom dominates, are not greatly affected by accounting for buoyancy effects. The model results also suggest that both mean flows and waves transport sediment during offshore bar migration, with different components of transport dominating at different cross-shore locations across the bar-trough bathymetry. Neglecting the effects of sediment-induced stratification results in higher model skill during the largest waves, likely because the excess turbulence production simulated by the non-stratified model is counterbalanced by neglected breaking-wave-generated turbulence. Considering both onshore and offshore migration, the model that includes sediment-induced stratification has higher skill than the model without stratification.