Unravelling the moisture sources of the Alpine glaciers using tunnel valleys as constraints

A lack of archives has impeded reconstructions of moisture pathways for past glaciations in the European Alps. Here, we focus on the confluence area of two palaeoglaciers in the Swiss Plateau that were sourced on the northern (Aare glacier) and southern sides (Valais glacier) of the European Alps. We mapped tunnel valleys in the region using a drilling database, based on which we inferred the relative extent of each glacier c. 270 ka ago when the valleys were formed. We then compared this situation with that of the LGM. We found that, while the Valais glacier expanded farther into the foreland than the Aare glacier during the LGM, the opposite was the case c. 270 ka ago. We also found that LGM glaciers were non‐erosive in the distal foreland. These contrasts in extents and erosional efficiencies imply differences in moisture pathways between the LGM and the time when the tunnel valleys were formed.     

Multitracer test approach to characterize reactive transport in karst aquifers

A method to estimate reactive transport parameters as well as geometric conduit parameters from a multitracer test in a karst aquifer is provided. For this purpose, a calibration strategy was developed applying the two-region nonequilibrium model CXTFIT. The ambiguity of the model calibration was reduced by first calibrating the model with respect to conservative tracer breakthrough and later transferring conservative transport parameters to the reactive model calibration. The reactive transport parameters were only allowed to be within a defined sensible range to get reasonable calibration values. This calibration strategy was applied to breakthrough curves obtained from a large-scale multitracer test, which was performed in a karst aquifer of the Swabian Alb, Germany. The multitracer test was conducted by the simultaneous injection of uranine, sulforhodamine G, and tinopal CBS-X. The model succeeds to represent the tracer breakthrough curves (TBCs) of uranine and sulforhodamine G and verifies that tracer-rock interactions preferably occur in the immobile fluid region, although the fraction of this region amounts to only 3.5% of the total water. However, the model failed to account for the long tailing observed in the TBC of tinopal CBS-X. Sensitivity analyses reveal that model results for the conservative tracer transport are most sensitive to average velocity and volume fraction of the mobile fluid region, while dispersion and mass transfer coefficients are least influential. Consequently, reactive tracer calibration allows the determination of sorption sites in the mobile and immobile fluid region at small retardation coefficients.     

Elimination of Swimming Pool Water Disinfection By‐products with Advanced Oxidation Processes (AOPs)

Ozonation is a treatment step which was first applied in the 1960s in pool water treatment for disinfection as well as for oxidation of pool water contaminants. Contact time between ozone and pool water was identified to be of significance with an increased elimination efficiency regarding chloramines, trihalogenmethane formation potential and the permanganate index for longer reaction times. Oxidation via OH radicals might be the dominating pathway. In this study ozonation was compared with the ozone based advanced oxidation processes ozone/UV and ozone/hydrogen peroxide regarding the elimination efficiency of both disinfection by‐products (DBPs) and DBP precursors. It was observed that AOPs in comparison to ozonation showed an increased elimination efficiency regarding total organic carbon (TOC), the organically bound halogens adsorbable on activated carbon (AOX) and AOX formation potential. A contact time of 3 minutes between pool water and oxidant turned out to be practically sufficient. Just for the trihalomethane (THM) formation potential ozonation showed a slight advantage compared to the AOPs because ozonation is a highly selective oxidant and OH radical reactions are known to produce small reactive molecules which are easier transformed to THMs. Combination of membrane filtration and AOPs resulted in an elimination of 10 to 90 % of the DBPs and their precursors. The ozone/hydrogen peroxide process is suggested for pool water treatment because of the higher elimination rates compared to ozonation and of economic reasons compared to the ozone/UV process.     

Computational validation of static and dynamic plate load testing

In this paper, the static load plate test and the dynamic load plate test by means of the light falling weight device are assessed utilizing numerical simulations. Simplified computational models of the tested subsoil and of the testing devices are developed, which capture the main effects of both the static and the dynamic load plate test. In extensive parametric studies, the impact of various subsoil conditions on the test results and several sources of error are evaluated and discussed. Computational test results of the static load plate test and of the dynamic load plate test are set in contrast to an effort to demonstrate the differences and the common features of the outcomes.     

Limnological studies of Amarga Lagoon,Chile: A saline lake in Patagonian South America

Amarga Lagoon, lat. 50°29 S and long. 73°45 S, it is located at the Torres del Paine National Park, Chile. The physical, chemical, and biological features of the lake were studied. According to salinity, the lake is mesosaline. Sodium and chloride were the dominant ions. Nitrogen was potentially limiting for phytoplankton growth. One Cyanophyceae species andArtemia were the predominant species in the plankton.Artemia provided abundant food for flamingoes.     

Late Miocene increasing exhumation rates in the eastern part of the Alps – implications from low temperature thermochronology

A new set of apatite fission‐track and apatite (U–Th)/He data reveals a hitherto undated late Miocene exhumation pulse in the eastern part of the Eastern Alps. While distinct parts of the study area, including the Seckauer Tauern, have been at near surface conditions (<100 °C) since the Eocene, the neighbouring Niedere Tauern experienced enhanced cooling and exhumation in the middle Miocene and again at the late Miocene/Pliocene boundary. Middle Miocene exhumation is interpreted as a result of tectonic escape and convergence that operated simultaneously during lateral extrusion of the Eastern Alps. As the higher late Miocene/Pliocene exhumation rates are restricted to a single tectonic block, namely the Niedere Tauern, we infer a tectonic trigger that is probably related to a change in the external stress field that affected the Alps during this time.     

Amazonian magnetostratigraphy: Dating the first pulse of the Great American Faunal Interchange

The chronostratigraphy of the youngest Neogene deposits of the Amazon Basin, which comprise the Madre de Dios Formation in eastern Peru, remains unresolved. Although ⁴⁰Ar/³⁹Ar dates on two volcanic ashes from this formation in Peru provide critical baseline data points, stratigraphic correlations among scattered riverine outcrops in adjacent drainage basins remain problematic. To refine the chronostratigraphy of the Madre de Dios Formation, we report here the magnetostratigraphy of an outcrop on the Madre de Dios River in southeastern Peru. A total of 18 polarity zones was obtained in the ～65-m-thick Cerro Colorado section, which we correlate to magnetozones Chrons C4Ar to C2An (9.5–3.0 Ma) based on the prior ⁴⁰Ar/³⁹Ar dates. These results confirm the late Miocene age of a gomphothere recovered from the Ipururo Formation, which underlies the late Miocene Ucayali Unconformity at the base of the Cerro Colorado outcrop. The results also support earlier interpretations of a late Miocene age for other fossils of North American mammals recovered from basal conglomeratic deposits of the Madre de Dios Formation immediately above the Ucayali Unconformity. These mammals include other gomphotheres, peccaries, and tapirs, and their presence in South America in the late Miocene is recognized as part of the first pulse of the Great American Faunal Interchange.     

A natural analogue of high pH cement pore waters from the Maqarin area of northern Jordan. I: introduction to the site

The highly alkaline springs of the Maqarin area of northern Jordan are currently under examination as part of an international project testing the models used to analyse the safety of repositories for low and intermediate level radioactive waste (L/ILW). The Maqarin area contains a rock-groundwater system which is an ideal natural analogue of a concrete-filled L/ILW repository emplaced in a sedimentary host rock. The high pH (12.5) groundwaters at this site are the product of interaction with naturally occurring cement minerals and not of the alteration of ultramafic minerals. Stable isotope data for the hyperalkaline groundwaters lie below both the local meteoric water line and the eastern Mediterranean water line. At least part of the shift appears to be the result of groundwater interaction with the cement minerals. This paper introduces the site of the natural analogue study and, in presenting novel data on the chemistry and stable isotopic signature of the groundwater, provides background information which is used in a companion paper (Alexander et al., 1992) on testing the predictive capabilities of geochemical thermodynamic codes (and their associated databases) which will be utilised as part of the safety assessment of a L/ILW repository.     

Joint inversion of groundwater flow,heat, and solute state variables: a multipurpose approach for characterization and forecast of karst systems

Characterization of karst systems and forecast of their state variables are essential for groundwater management and engineering in karst regions. These objectives can be met by the use of process-based discrete-continuum models (DCMs). However, results of DCMs may suffer from inversion nonuniqueness. It has been demonstrated that the joint inversion of observations regulated by different natural processes can tackle the nonuniqueness issue in groundwater modeling. However, this has not been tested for DCMs thus far. This research proposes a methodology for the joint inversion of hydro-thermo-chemo-graphs, applying to two small-scale sink-to-spring experiments at Freiheit Spring, Minnesota, USA. In order to address conceptual uncertainty, a multimodel approach was implemented, featuring seven mutually exclusive variants. Spring hydro-thermo-chemo-graphs, for all the variants simulated by MODFLOW-CFPv2, were jointly inverted using a weighted least squares algorithm. Subsequently, models were compared in terms of inversion and forecast performances, as well as parameter uncertainties. Results reveal the suitability of the DCM approach for simultaneous inversion and forecast of hydro-physico-chemical behavior of karst systems, even at a scale of meters and seconds. The estimated volume of the tracer conduit passage ranges from approximately 46–51 m³, which is comparable to the estimate from the flood-pulse method. Moreover, it was demonstrated that the thermograph and hydrograph contain more information about aquifer characteristics than the chemograph. However, this finding can be site-specific and should depend on the analysis scale, the considered conceptual models, and the hydrological state, which are potentially affected by minor unaccountable processes and features.

     

Strontium as a tracer of weathering processes in a silicate catchment polluted by acid atmospheric inputs, Strengbach, France

This paper determines the weathering and atmospheric contributions of Ca in surface water from a small spruce forested silicate catchment (N–E France) receiving acid atmospheric inputs. The bedrock is a granite with K-feldspar and albite as dominant phases. The calcium content in plagioclase is low and the Ca/Na ratio in surface water is high, reflecting other sources of calcium from those expected from the weathering of major mineral phases. The biotite content is low. Only traces of apatite were detected while no calcite was found in spite of a major hydrothermal event having affected the granite. The strontium isotopic ratio ⁸⁷Sr/⁸⁶Sr and Sr content was used as a tracer of weathering and was determined in minerals and bulk bedrock, open field precipitation, throughfall, soil solution, spring and stream water. The Sr isotopic ratio of the reacting weathering end-member was predicted by simulating the alteration of the granite minerals by incorporating strontium into the water–rock interaction kinetic code KINDIS. In the early stages of water–rock interaction, K-feldspar and biotite strongly influence the isotopic composition of the weathering solution whereas, the Na-rich plagioclase appears to be the main long-term reactive weathering end-member. Approximately 50% of dissolved Sr in streamwater are atmospherically derived. The ⁸⁷Sr/⁸⁶Sr ratios of exchangeable Sr in the fine fraction at 1-m depth from a soil profile indicate that the amount of exchangeable Sr seems essentially controlled by atmospheric inputs. The exception is the deep saprolite where weathering processes could supply the Sr (and Ca). Na-Plagioclase weathering obviously control the chemistry and the isotopic composition of surface waters. The weathering of trace mineral plays a secondary role, the exception is for apatite when plagioclase is absent. Our hydrochemical, mineralogical and isotopic investigations show that a major part of the strong Ca losses detected in catchment hydrochemical budgets that result from the neutralization of acid precipitation has an atmospheric origin. Consequently, in the long term, in such areas, the availability of such an exchangeable base cation might be strongly limited and surface waters consequently acidified.