Nonlinear finite and discrete element simulations of multi-storey masonry walls

Bulletin of Earthquake Engineering - This paper reports the results of different finite and discrete element simulations on a well-known benchmark of an unreinforced plane masonry structure....     

A virtual element method for the two-phase flow of immiscible fluids in porous media

A primal C⁰-conforming virtual element discretization for the approximation of the bidimensional two-phase flow of immiscible fluids in porous media using general polygonal meshes is discussed. This work investigates the potentialities of the Virtual Element Method (VEM) in solving this specific problem of immiscible fluids in porous media involving a time-dependent coupled system of non-linear partial differential equations. The performance of the fully discrete scheme is thoroughly analysed testing it on general meshes considering both a regular problem and more realistic benchmark problems that are of interest for physical and engineering applications.

     

Improving Bayesian analysis for LISA Pathfinder using an efficient Markov Chain Monte Carlo method

We present a parameter estimation procedure based on a Bayesian framework by applying a Markov Chain Monte Carlo algorithm to the calibration of the dynamical parameters of the LISA Pathfinder satellite. The method is based on the Metropolis-Hastings algorithm and a two-stage annealing treatment in order to ensure an effective exploration of the parameter space at the beginning of the chain. We compare two versions of the algorithm with an application to a LISA Pathfinder data analysis problem. The two algorithms share the same heating strategy but with one moving in coordinate directions using proposals from a multivariate Gaussian distribution, while the other uses the natural logarithm of some parameters and proposes jumps in the eigen-space of the Fisher Information matrix. The algorithm proposing jumps in the eigen-space of the Fisher Information matrix demonstrates a higher acceptance rate and a slightly better convergence towards the equilibrium parameter distributions in the application to LISA Pathfinder data. For this experiment, we return parameter values that are all within ～1σ of the injected values. When we analyse the accuracy of our parameter estimation in terms of the effect they have on the force-per-unit of mass noise, we find that the induced errors are three orders of magnitude less than the expected experimental uncertainty in the power spectral density.     

Wavelet‐based regularization of the extracted topographic index from high‐resolution topography for hydro‐geomorphic applications

High‐resolution topography, e.g. 1‐m digital elevation model (DEM) from light detection and ranging (LiDAR), offers opportunity for accurate identification of topographic features of relevance for hydrologic and geomorphologic modelling. Yet, the computation of some derived topographic properties, such as the topographic index (TI), is characterized by daunting challenges that hamper the full exploration of topography‐based models. Particular problems, for example, arise when a distributed (or semi‐distributed) rainfall–runoff model is applied to high‐resolution DEMs. Indeed, the characteristic dependency between landscape resolution and the computed TI distribution results in the formation of un‐physical, unconnected saturated zones, which in turn cause unrealistic representations of rainfall–runoff dynamics. In this study, we present a methodology based on a multi‐resolution wavelet transformation that, by means of a soft‐thresholding scheme on the wavelet coefficients, filters the noise of high‐resolution topography to construct regularized sets of locally smoother topography on which the TI is computed. While the methodology needs a somewhat arbitrary definition of the wavelet coefficients threshold, our study shows that when the information content (entropy) of the TI distribution is used as a filtering efficiency metric, a critical threshold automatically emerges in the landscape reconstruction. The methodology is demonstrated using 1‐m LiDAR data for the Elder Creek River basin in California. While the proposed case study uses a TOPMODEL approach, the methodology can be extended to different topography‐based models and is not limited to hydrological applications. Copyright © 2012 John Wiley & Sons, Ltd.     

A bond contact model for methane hydrate‐bearing sediments with interparticle cementation

While methane hydrates (MHs) can be present in various forms in deep seabeds or permafrost regions, this paper deals with MH‐bearing sediments (MHBS) where the MH has formed bonds between sand grains. A bond model based on experimentally validated contact laws for cemented granules is introduced to describe the mechanical behavior of the MH bonds. The model parameters were derived from measured values of temperature, water pressure and MH density. Bond width and thickness adopted for each bond of the MHBS were selected based on the degree of MH saturation. The model was implemented into a 2D distinct element method code. A series of numerical biaxial standard compression tests were carried out for various degrees of MH saturation. A comparison with available experimental data shows that the model can effectively capture the essential features of the mechanical behavior of MHBS for a wide range of levels of hydrate saturation under drained and undrained conditions. In addition, the analyses presented here shed light on the following: (1) the relationship between level of cementation and debonding mechanisms taking place at the microscopic level and the observed macro‐mechanical behavior of MHBS and (2) the relationship between spatial distribution of bond breakages and contact force chains with the observed strength, dilatancy and deformability of the samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Measurements of rill and gully erosion in Sicily

This article reports the results of a field investigation aimed to characterize the morphology of both rills monitored at Sparacia experimental area and two ephemeral gullies (EGs) located in the Tremamargi basin, Sicily, Italy. At first, the available literature data together with the measurements carried out in this investigation were used to show that the EG length is a key parameter for the estimation of the eroded volume. Then, the comparison among the pairs length and volume corresponding to measured rills, EGs and gullies showed that the exponent of the power relationship is independent of the channelized erosion type (rill, EG and gully), while a different scale factor has to be used for each erosion process. Finally, a single relationship applicable to all channelized erosion processes was deduced applying the dimensional analysis and the self‐similarity theory. Copyright © 2011 John Wiley & Sons, Ltd.     

Geophysical investigation of the Sandalp rock avalanche deposits

In the study of rock avalanche phenomena, numerical modelling makes use of back analyses of the rock avalanche propagation for calibration of the modelling assumptions and parameters. The back analyses require knowledge of the run-out area boundaries and the thickness distribution of the deposit. Geophysical methods can be applied to retrieve the thickness distribution, but, due to strong heterogeneities and logistic problems they are seldom applied. The aim of this work is to assess the potential of integrated geophysical methods to recognise and characterise a deposit created by two rock avalanches which occurred in the Sandalp valley (Switzerland) in 1996. The topography of the site before and after the rock avalanche is known and can be used as a benchmark. Resistivity tomography, seismic P-wave tomography, and active and passive surface wave analysis have been applied on several profiles deployed both on the rock avalanche deposit and in the surrounding area. Innovative approaches for surface wave analysis based on laterally constrained inversion and multimodal inversion have been applied to the data. A comparison of the results of the geophysical investigations with the topographic benchmark has shown the capability of the geophysical methods to locate the bottom of the deposit in the areas where the contrast with the host sediments properties is significant. In these areas, the deposit has higher resistivities and lower seismic velocities than the underlying materials. In the areas where the deposit is thicker and richer in fine-grained materials the geophysical parameters are not able to discriminate between the rock avalanche deposit and the underlying sediments. As a secondary task, the geophysical methods also allowed the bedrock pattern to be outlined.     

Early diagenesis in rapidly accumulating sediments on the Alboran slope, ODP site 976

The oxidation and reduction that occur during early diagenesis of sediments has been studied in the interstitial waters of a rapidly accumulating sedimentary sequence from the Mediterranean margin of Spain. A series of reactions that are mediated by progressively lower free energy derived from oxidation of organic matter is evident in the sedimentary sequence. Iron and manganese are rapidly reduced. Phosphate and alkalinity maxima at a subbottom depth of 15?m indicate maximal organic matter degradation. Methane first appears at ～20?m subbottom after sulfate is depleted, and its concentrations quickly climb.