Evidence of positive tectonic inversion in the north-central sector of the Sicily Channel (Central Mediterranean)

In order to unravel the tectonic evolution of the north-central sector of the Sicily Channel (Central Mediterranean), a seismo-stratigraphic analysis of single- and multi-channel seismic reflection profiles has been carried out. This allowed to identify, between 20 and 50 km offshore the central-southern coast of Sicily, a ~80-km-long deformation belt, characterized by a set of WNW–ESE to NW–SE fault segments showing a poly-phasic activity. Within this belt, we observed: i) Miocene normal faults reactivated during Zanclean–Piacenzian time by dextral strike-slip motion, as a consequence of the Africa–Europe convergence; ii) releasing and restraining bend geometries forming well-developed pull-apart basins and compressive structures. In the central and western sectors of the belt, we identified local transpressional reactivations of Piacenzian time, attested by well-defined compressive features like push-up structures and fault-bend anticlines. The reconstruction of timing and style of tectonic deformation suggest a strike-slip reactivation of inherited normal faults and the local subsequent positive tectonic inversion, often documented along oblique thrust ramps. This pattern represents a key for an improved knowledge of the structural style of foreland fold-and-thrust belts propagating in a preexisting extensional domain. With regard to active tectonics and seismic hazards, recent GPS data and local seismicity events suggest that this deformation process could be still active and accomplished through deep-buried structures; moreover, several normal faults showing moderate displacements have been identified on top of the Madrepore Bank and Malta High, offsetting the Late Quaternary deposits. Finally, inside the northern part of the Gela Basin, multiple slope failures, originated during Pleistocene by the further advancing of the Gela Nappe, reveal tectonically induced potential instability processes.

     

Bed evolution measurement with flowing water in morphodynamics experiments

A new approach for the profiling of movable sediment beds in laboratory experiments is presented. It couples a triangulation laser sensor and an ultrasonic level transmitter, and allows a non‐intrusive, fast and accurate measurement of bed topography without stopping the experimental runs. The distortion of the laser beam due to the refraction at the water surface is corrected by contemporaneously measuring the elevation of the water surface through the ultrasonic level transmitter and taking advantage of geometrical relations involving the water depth, distance of the sensors from the water surface, and the angles that the emitted laser beam forms with the vertical before and after refraction. Several tests, under either still‐ or flowing‐water conditions, as well as increasing/decreasing water surface elevation, were carried out to evaluate the accuracy of the measurements. These tests indicate that good‐quality measurements are obtained for flow depths in the range 0 < D < 60 mm, typical of morphodynamic laboratory experiments. Finally, two relevant applications to movable bed experiments carried out under either lagoonal or fluvial conditions are presented that show the effectiveness of the proposed profiling technique. Copyright © 2012 John Wiley & Sons, Ltd.     

Multiparametric Approach in Investigating Volcano-Hydrothermal Systems: the Case Study of Vulcano (Aeolian Islands, Italy)

Seismic activity, ground deformation, and soil and fumarole temperatures acquired during 2004–2007 at Vulcano (Aeolian Islands) are analysed and the time relations among the different time series are discussed. Changes in temperature of fumarolic gases took place during four “anomalous” periods (November 2004–March 2005; October 2005–February 2006; August–October 2006; July–December 2007) at the same time as an increasing number of volcano-seismic events. In particular, the temperatures at high temperature vents and at steam heated soil ranged in time from 180 to 440°C and from 20 to 90°C, respectively. The maximum daily number of volcano-seismic events was 57, reached during the second anomalous period. This seismicity, characterised by focal depth generally lower than 1?km below sea level (b.s.l.) and composed of different kinds of events associated to both resonance and shear failure processes, is related to the shallow dynamics of the hydrothermal system. During the analysed period, very few volcano-tectonic earthquakes took place and tilt recordings showed no sharp or important changes. In light of such observations, the increases in both temperature and volcano-seismic events number were associated to increases in the release of gas from a deep and stable magma body, without magma intrusions within the shallow hydrothermal system. Indeed, a greater release of gas from depth leads to increased fluid circulation, that can promote increases in volcano-seismic events number by both fracturing processes and resonance and vibration in cracks and conduits. The different trends observed in the measured geochemical and geophysical series during the anomalous periods can be due to either time changes in the medium permeability or a changing speed of gas release from a deep magma body. Finally, all the observed variations, together with the changing temporal distribution of the different seismic event kinds, suggest that the hydrothermal system at Vulcano can be considered unsteady and dynamic.     

Bedform effect on the reorganization of surface and subsurface grain size distribution in gravel bedded channels

Quantification of river bedform variability and complexity is important for sediment transport modeling as well as for characterization of river morphology. Alluvial bedforms are shown to exhibit highly nonlinear dynamics across a range of scales, affect local bed roughness, and vary with local hydraulic, hydrologic, and geomorphic properties. This paper examines sediment sorting on the crest and trough of gravel bedforms and relates it to bed elevation statistics. The data analysed here are the spatial and temporal series of bed elevation, grain size distribution of surface and subsurface bed materials, and sediment transport rates from flume experiments. We describe surface topography through bedform variability in height and wavelength and multiscale analysis of bed elevations as a function of discharge. We further relate bedform migration to preferential distribution of coarse and fine sediments on the troughs and crests, respectively, measuring directly surface and subsurface grain size distributions, and indirectly the small scale roughness variations as estimated from high resolution topographic scans.     

Arsenic in volcanic gases

 Total arsenic contents were determined in volcanic gases by analysis of fumarolic condensates collected in the period 1984–1992 from different volcanoes around the world. Arsenic concentrations range from <0.006 to 30 μg/g. The highest values (1.2–30 μg/g) were found at Vulcano, Aeolian Islands (southern Italy). The analytical data show that volcanic gases have a large variability of arsenic contents possibly related to both the different physicochemical features of magma source and rock properties within the volcanic system. Received: 2 October 1996 · Accepted: 29 January 1997     

Large wood transport modelling by a coupled Eulerian–Lagrangian approach

The fractal characteristics of the ultra-low-frequency (ULF) magnetic field variations recorded prior to the Tohoku earthquake (EQ) with M _W = 9 which happened on 11 March 2011 are studied in this article with the use of detrended fluctuation analysis and Higuchi fractal dimension algorithm. In the specific study, we use for our calculations only nighttime (LT = 3 a.m. ± 2 h) data because of their lowest contamination by industrial noise. A key aspect of our analysis is the investigation about any possible correlation of the ULF magnetic field variations or their calculated fractal characteristics with geomagnetic indices. Different preprocessing approaches are examined aiming at the minimization of any possible influences from global phenomena in the fractal analysis results, while in the same time retaining the scale-invariant character of ULF magnetic field variations after preprocessing. The obtained fractal analysis results imply locally driven change in the fractal characteristics of the ULF data prior to the Tohoku EQ, which is compatible with the change that has been reported prior to other large EQs.     

Fractures and faults in volcanic rocks (Campi Flegrei,southern Italy): insight into volcano-tectonic processes

The present study was focused to analyze fractures and faults in the Campi Flegrei calderas presently hosting several volcanic edifices, such as lava domes, scoria, and tuff cones. A complex network of fractures and faults affects the volcanic rocks, mostly as planar with highly variable density. Frequently faults appearing as conjugate structures showing normal kinematics often associated with ductile deformation such as drag folds and deflexed layers, suggesting a syn-eruption deformation. However, the most of faults, mainly hosted along the caldera/crater rims, are very steep with dominant normal and secondary reverse movements. The fracture pattern indicates a slight prevalence of NE–SW and NW–SE directions, but N–S and E–W trends also occur. Fractures and faults found in rocks older than 15 ka (Neapolitan Yellow Tuff included), measured in western and eastern sectors of the study area, indicate a rotation of ca. 30° of the main directions among these two sectors. For the faults occurring along the caldera/crater rims, we suggest a kinematic evolution characterized by the reactivation of tensile fractures previously formed in response to both regional extension and locale resurgent dome. Finally, normal faults located in the central sector of caldera, between La Starza and Accademia localities, cutting the youngest volcanic deposits, indicate a constant NNE–SSW extension probably related to the caldera resurgence.     

Experimental determination of magnesia and silica solubilities in graphite-saturated and redox-buffered high-pressure COH fluids in equilibrium with forsterite + enstatite and magnesite + enstatite

We experimentally investigated the dissolution of forsterite, enstatite and magnesite in graphite-saturated COH fluids, synthesized using a rocking piston cylinder apparatus at pressures from 1.0 to 2.1 GPa and temperatures from 700 to 1200 °C. Synthetic forsterite, enstatite, and nearly pure natural magnesite were used as starting materials. Redox conditions were buffered by Ni–NiO–H₂O (ΔFMQ = ??0.21 to ??1.01), employing a double-capsule setting. Fluids, binary H₂O–CO₂ mixtures at the P, T, and fO₂ conditions investigated, were generated from graphite, oxalic acid anhydrous (H₂C₂O₄) and water. Their dissolved solute loads were analyzed through an improved version of the cryogenic technique, which takes into account the complexities associated with the presence of CO₂-bearing fluids. The experimental data show that forsterite?+?enstatite solubility in H₂O–CO₂ fluids is higher compared to pure water, both in terms of dissolved silica (mSiO₂?=?1.24 mol/kg_H2O versus mSiO₂?=?0.22 mol/kg_H2O at P?=?1 GPa, T?=?800 °C) and magnesia (mMgO?=?1.08 mol/kg_H2O versus mMgO?=?0.28 mol/kg_H2O) probably due to the formation of organic C–Mg–Si complexes. Our experimental results show that at low temperature conditions, a graphite-saturated H₂O–CO₂ fluid interacting with a simplified model mantle composition, characterized by low MgO/SiO₂ ratios, would lead to the formation of significant amounts of enstatite if solute concentrations are equal, while at higher temperatures these fluid, characterized by MgO/SiO₂ ratios comparable with that of olivine, would be less effective in metasomatizing the surrounding rocks. However, the molality of COH fluids increases with pressure and temperature, and quintuplicates with respect to the carbon-free aqueous fluids. Therefore, the amount of fluid required to metasomatize the mantle decreases in the presence of carbon at high P–T conditions. COH fluids are thus effective carriers of C, Mg and Si in the mantle wedge up to the shallowest level of the upper mantle.