Precise orbit determination of the Sentinel-3A altimetry satellite using ambiguity-fixed GPS carrier phase observations

The Sentinel-3 mission takes routine measurements of sea surface heights and depends crucially on accurate and precise knowledge of the spacecraft. Orbit determination with a targeted uncertainty of less than 2 cm in radial direction is supported through an onboard Global Positioning System (GPS) receiver, a Doppler Orbitography and Radiopositioning Integrated by Satellite instrument, and a complementary laser retroreflector for satellite laser ranging. Within this study, the potential of ambiguity fixing for GPS-only precise orbit determination (POD) of the Sentinel-3 spacecraft is assessed. A refined strategy for carrier phase generation out of low-level measurements is employed to cope with half-cycle ambiguities in the tracking of the Sentinel-3 GPS receiver that have so far inhibited ambiguity-fixed POD solutions. Rather than explicitly fixing double-difference phase ambiguities with respect to a network of terrestrial reference stations, a single-receiver ambiguity resolution concept is employed that builds on dedicated GPS orbit, clock, and wide-lane bias products provided by the CNES/CLS (Centre National d’Études Spatiales/Collecte Localisation Satellites) analysis center of the International GNSS Service. Compared to float ambiguity solutions, a notably improved precision can be inferred from laser ranging residuals. These decrease from roughly 9 mm down to 5 mm standard deviation for high-grade stations on average over low and high elevations. Furthermore, the ambiguity-fixed orbits offer a substantially improved cross-track accuracy and help to identify lateral offsets in the GPS antenna or center-of-mass (CoM) location. With respect to altimetry, the improved orbit precision also benefits the global consistency of sea surface measurements. However, modeling of the absolute height continues to rely on proper dynamical models for the spacecraft motion as well as ground calibrations for the relative position of the altimeter reference point and the CoM.     

The Laacher See Tephra discovered in southernmost Sweden

We present the first geochemically confirmed finding of the Laacher See Tephra (LST) on the Swedish mainland, now the northernmost extension of the LST. Sediments were sampled at the Körslättamossen fen, southernmost Sweden, and a high‐concentration cryptotephra occurrence (>65 000 shards cm^?3) of the LST was found in a sequence of calcareous gyttja. Tephra identification was confirmed by geochemical analysis using field‐emission electron probe microanalysis and through comparison of the results with published LST data from proximal sites and distal sites north‐east of Laacher See. The LST has previously been divided into eruption phases suggested to have spread in several dispersal fans, but it was not possible to confidently determine the phase of the tephra here closer than to the MLST or ULST. The finding of the LST presented here further strengthens the potential of tephrochronological studies in the south Scandinavian region.

     

Three‐dimensional seismic analysis of sediment waves and related geomorphological features on a carbonate shelf exposed to large amplitude internal waves,Browse Basin region,Australia

This study analyses the three‐dimensional geometry of sedimentary features recorded on the modern sea floor and in the shallow subsurface of a shelf to upper slope region offshore Australia that is characterized by a pronounced internal wave regime. The data interpreted comprise an extensive, >12 500 km² industrial three‐dimensional seismic‐reflection survey that images the northern part of the Browse Basin, Australian North West Shelf. The most prominent seismic–morphological features on the modern sea floor are submarine terrace escarpments, fault‐scarps and incised channels, as well as restricted areas of seismic distortion interpreted as mass wasting deposits. Besides these kilometre‐scale sea floor irregularities, smaller bedforms were discovered also, including a multitude of sediment waves with a lateral extent of several kilometres and heights up to 10 m. These sedimentological features generally occur in extensive fields in water depths below 250 m mostly at the foot of submerged terraces, along the scarps of modern faults and along the shelf break between the outer shelf and the upper continental rise. Additional bedforms that characterize the more planar regions of the outer shelf are elongate, north‐west/south‐east oriented furrows and ridges. The formation of both sediment waves and furrow‐ridge systems requires flow velocities between 0·3 m sec^?1 and 1·5 m sec^?1, which could be generated by oceanic currents, gravity currents or internal waves. In the studied setting, these velocities can be best explained as being generated by bottom currents induced by internal waves, an interpretation that is discussed against oceanographic background data and modelling results. In addition to the documentation of three‐dimensional seismic–geomorphological features of the modern sea floor, it was also possible to map kilometre‐scale buried sediment wave fields in the seismic volume down to ca 500 ms two‐way‐time below the present sea floor, indicating the general potential for the preservation of such bedforms in the sedimentary record.     

Sound in media: audio drama and audio-guided tours as stimuli for the creation of place

Mass media frequently makes use of more than the visual image. With the exception of music, movie scores, and radio news however, media geographers have largely ignored the impact sound in media has on shaping and characterizing our experience of the world. We address this lack by showcasing two types of audio media: audio drama and audio-guided tours. The former will be explored with the help of the world’s most successful audio drama series The Three Investigators to give a historical and theoretical introduction to the realm of sound within mass media. The latter will be illustrated using the example of the Austin Walking Tour as a representative production for city tourism.     

Deep‐sourced gas seepage and methane‐derived carbonates in the Northern Adriatic Sea

In the Northern Adriatic Sea, the occurrence of gas seepage and of unique rock outcrops has been widely documented. The genesis of these deposits has recently been ascribed to gas venting, leading to their classification as methane‐derived carbonates. However, the origin of seeping gas was not clearly constrained. Geophysical data collected in 2009 reveal that the gas‐enriched fluid vents are deeply rooted. In fact, the entire Plio‐Quaternary succession is characterized by widespread seismic anomalies represented by wipe‐out zones, and interpreted as gas chimneys. They commonly root at the base of the Pliocene sequence but also within the Palaeogene succession, where they appear to be associated to deep‐seated faults. We suggest that there is a structural control on chimney distribution. Chimneys originate and terminate at different stratigraphic levels; commonly they reach the seafloor, where authigenic carbonate deposits form locally. Gas analyses of some gas bubble streams just above the rock outcrops reveal that gas is composed mainly of methane. Geochemical analyses performed at four selected outcrop sites show that these deposits formed as a consequence of active gas venting. In particular, geochemical analyses indicate carbonate precipitation from microbial oxidation of methane‐rich fluids, although a straightforward correlation with the source depth of gas feeding the authigenic carbonates cannot yet be clearly defined.     

Subsurface deformation in hypervelocity cratering experiments into high‐porosity tuffs

Hypervelocity impact experiments on porous tuff targets were carried out to determine the effect of porosity on deformation mechanisms in the crater's subsurface. Blocks of Weibern Tuff with about 43% porosity were impacted by 2.5 mm and 12.0 mm diameter steel spheres with velocities between 4.8 km s^?1 and 5.6 km s^?1. The postimpact subsurface damage was quantified with computer tomography as well as with meso‐ and microscale analyses of the bisected crater subsurface. The intensity and style of deformation in mineral clasts and the tuff matrix were mapped and their decay with subsurface depth was determined. Subsurface deformation styles include pore space compaction, clast rotation, as well as microfracture formation. Evaluation of the deformation indicates near‐surface energy coupling at a calculated depth of burial of ~2 projectile diameters (d_p), which is in conflict with the crater shape, which displays a deep, central penetration tube. Subsurface damage extends to ~2 d_p beneath the crater floor in the experiments with 2.5 mm projectiles and increases to ~3 d_p for 12 mm projectiles. Based on overprinting relationships and the geometrical orientation of deformation features, a sequence of subsurface deformation events was derived (1) matrix compaction, (2) intragranular crack formation in clasts, (3) deformation band formation in the compacted matrix, (4) tensile fracturing.     

Climate variability in the Aral Sea basin (Central Asia) during the late Holocene based on vegetation changes

High-resolution pollen analyses ( 50 yr) from sediment cores retrieved at Chernyshov Bay in the NW Large Aral Sea record shifts in vegetational development from subdesertic to steppe vegetation in the Aral Sea basin during the late Holocene. Using pollen data to quantify climatic parameters, we reconstruct and date for the first time significant changes in moisture conditions in Central Asia during the past 2000 yr. Cold and arid conditions prevailed between ca. AD 0 and 400, AD 900 and 1150, and AD 1500 and 1650 with the extension of xeric vegetation dominated by steppe elements. These intervals are characterized by low winter and summer mean temperatures and low mean annual precipitation (P_mm < 250 mm/yr). Conversely, the most suitable climate conditions occurred between ca. AD 400 and 900, and AD 1150 and 1450, when steppe vegetation was enriched by plants requiring moister conditions (P_mm  250–500 mm/yr) and some trees developed. Our results are fairly consistent with other late Holocene records from the eastern Mediterranean region and the Middle East, showing that regional rainfall in Central Asia is predominantly controlled by the eastern Mediterranean cyclonic system when the North Atlantic Oscillation (NAO) is in a negative phase.     

Routing through open spaces – A performance comparison of algorithms

Abstract

Finding the shortest path through open spaces is a well-known challenge for pedestrian routing engines. A common solution is routing on the open space boundary, which causes in most cases an unnecessarily long route. A possible alternative is to create a subgraph within the open space. This paper assesses this approach and investigates its implications for routing engines. A number of algorithms (Grid, Spider-Grid, Visibility, Delaunay, Voronoi, Skeleton) have been evaluated by four different criteria: (i) Number of additional created graph edges, (ii) additional graph creation time, (iii) route computation time, (iv) routing quality. We show that each algorithm has advantages and disadvantages depending on the use case. We identify the algorithms Visibility with a reduced number of edges in the subgraph and Spider-Grid with a large grid size to be a good compromise in many scenarios.     

On the effects of resolution in dissipationless cosmological simulations

We present a study of numerical effects in dissipationless cosmological simulations. The numerical effects are evaluated and studied by comparing the results of a series of 64³-particle simulations of varying force resolution and number of time-steps, performed using three of the N -body techniques currently used for cosmological simulations: the Particle–Mesh (PM), the Adaptive Particle–Particle–Particle–Mesh (AP³M) and the newer Adaptive Refinement Tree (ART) codes. This study can therefore be interesting both as an analysis of numerical effects and as a systematic comparison of different codes.
We find that the AP³M and the ART codes produce similar results given that convergence is reached within the code type. We also find that numerical effects may affect the high-resolution simulations in ways that have not been discussed before. In particular, our study revealed the presence of two-body scattering, the effects of which can be greatly amplified by inaccuracies in time integration. This process appears to affect the correlation function of matter, the mass function, the inner density of dark matter haloes and other statistics at scales much larger than the force resolution, although different statistics may be affected in a different fashion. We discuss the conditions for which strong two-body scattering is possible and discuss the choice of the force resolution and integration time-step. Furthermore, we discuss recent claims that simulations with force softening smaller than the mean interparticle separation are not trustworthy and argue that this claim is incorrect in general, and applies only to the phase-sensitive statistics. Our conclusion is that, depending on the choice of mass and force resolution and the integration time-step, a force resolution as small as 0.01 of the mean interparticle separation can be justified.     

Low-frequency microtremor anomalies at an oil and gas field in Voitsdorf, Austria

Results of a passive microtremor survey at an oil and gas field in Voitsdorf, Austria, are presented. The survey consists in six parallel profiles approximately 9 km long over two hydrocarbon reservoirs. For each profile the seismic wavefield was recorded synchronously at 11 in-line stations. The measurements were conducted with broadband seismometers and lasted, for each profile, at least 12 hours overnight. Data interpretation is based on a comprehensive data set and on the analysis of four different spectral attributes. These attributes quantify the characteristic features of the wavefield's Fourier spectra in the low-frequency range (<10Hz). One attribute quantifies the spectral energy in the vertical wavefield component, another attribute quantifies the maxima in vertical-to-horizontal spectral ratios and two attributes describe the frequency shifts of peaks within the spectra of vertical and horizontal wavefield components. Due to temporal variations of the signals we combine the long-term measurements (several hours of continuous records) of multiple profiles. This procedure considerably enhances the consistency of each spectral attribute and makes them suitable to quantify lateral variations of the wavefield. The results show that using a combination of several attributes significantly increases the reliability of detecting anomalies in the microtremor wavefield that are presumably caused by hydrocarbon reservoirs. A numerical study of two-dimensional seismic wave propagation is applied to investigate the peak frequency shift attributes. The results of the study indicate that the attributes may contain information on the depth of hydrocarbon reservoirs, assuming that the reservoir acts as a (secondary) source of low-frequency seismic waves.