Application of the TEX86 temperature proxy to the southern North Sea

A novel temperature proxy, the tetraether index of lipids with 86 carbon atoms (TEX₈₆), was applied to the suspended particulate organic matter (POM) and sediment core tops from eight sites in the southern North Sea in different seasons. The TEX₈₆-derived temperatures in many samples did not correlate with mean annual sea surface temperature (SST), but were shifted toward winter SST, apparently because Crenarchaeota are more abundant and metabolically active during periods of low primary production. This indicates that TEX₈₆-derived SST estimates do not necessarily reflect annual mean SST and may provide essential information about seasonal SST palaeoreconstruction. High TEX₈₆-derived SSTs were measured in the water of the river Rhine and in the sediment core tops and seawater from several stations in the southern North Sea. These sites were all characterised by important input of organic matter from soil and peat, as revealed by the relatively high values obtained with the new terrestrial proxy, the branched and isoprenoid tetraether (BIT) index. These data demonstrate that to reconstruct palaeotemperatures it is essential to estimate both TEX₈₆ and BIT indices to check that TEX₈₆ temperatures are not biased as a result of large terrestrial input. Important seasonal variations in TEX₈₆-derived SST were also evident for the surface sediments of several stations characterised by extremely low sedimentation rates, indicating temporary settlement of laterally transported organic matter with a warmer temperature signal. This implies that sediment core top correlations between TEX₈₆ and mean annual SST should not be carried out in areas characterised by transient sediment deposition.     

The surface energy balance and the mixing height in urban areas—activities and recommendations of COST-Action 715

The specific problems of determining and simulating the surface energy balance (SEB) and the mixing height (MH) over urban areas are examined. The SEB and MH are critical components of algorithms and numerical models for the urban boundary layer, though the constituent parts of the SEB and the MH are not routinely measured by national weather services. Parameterisations are thus needed in applications. In this investigation, several recently developed algorithms and models for estimating the SEB and MH were applied to new datasets and assessed. Results are discussed in terms of the need for spatial resolution and the parameters needed to describe the urban atmosphere. Limitations of models are identified and recommendations for further development and observations are given. Having identified gaps in knowledge, key findings from new urban experiments and numerical modelling for the SEB and MH are given. The diurnal cycle for the SEB is significantly different from rural conditions—urban heat storage is needed in urban parameterisations. The urban MH is increased over the rural MH, as shown by several numerical schemes and careful sodar analyses. This work has been carried out within the COST-715 Action “Meteorology applied to urban air pollution problems (1998–2004). COST 715 reached a consensus proposing representatively sited measurements of meteorological parameters and turbulent fluxes above roof-tops, and recognised that such data are needed to improve numerical models of the urban surface processes.     

On interpreting hydrological change from regional climate models

Although representation of hydrology is included in all regional climate models (RCMs), the utility of hydrological results from RCMs varies considerably from model to model. Studies to evaluate and compare the hydrological components of a suite of RCMs and their use in assessing hydrological impacts from future climate change were carried out over Europe. This included using different methods to transfer RCM runoff directly to river discharge and coupling different RCMs to offline hydrological models using different methods to transfer the climate change signal between models. The work focused on drainage areas to the Baltic Basin, the Bothnian Bay Basin and the Rhine Basin. A total of 20 anthropogenic climate change scenario simulations from 11 different RCMs were used. One conclusion is that choice of GCM (global climate model) has a larger impact on projected hydrological change than either selection of emissions scenario or RCM used for downscaling.     

Reduced dynamic and kinematic precise orbit determination for the Swarm mission from 4 years of GPS tracking

Precise science orbits for the first 4 years of the Swarm mission have been generated from onboard GPS measurements in a systematic reprocessing using refined models and processing techniques. Key enhancements relate to the introduction of macro-models for a more elaborate non-gravitational force modeling (solar radiation pressure, atmospheric drag and lift, earth albedo), as well as carrier phase ambiguity fixing. Validation using satellite laser ranging demonstrates a 30% improvement in the precision of the reduced dynamic orbits with resulting errors at the 0.5–1 cm level (1D RMS). A notable performance improvement is likewise achieved for the kinematic orbits, which benefit most from the ambiguity fixing and show a 50% error reduction in terms of SLR residuals while differences with respect to reduced dynamic ephemerides amount to only 1.7 cm (median of daily 3D RMS). Compared to the past kinematic science orbits based on float-ambiguity estimates, the new kinematic position solutions exhibit a factor of reduction of two to three in Allan deviation at time scales of 1000s and higher, and promise an improved recovery of low-degree and -order gravity field coefficients in Swarm gravity field analyses.     

Earthquakes in Switzerland and surrounding regions during 2015 and 2016

This report summarizes the seismicity in Switzerland and surrounding regions in the years 2015 and 2016. In 2015, the Swiss Seismological Service detected and located 735 earthquakes in the region under consideration. With a total of 20 earthquakes of magnitude M_L ≥ 2.5, the seismic activity of potentially felt events in 2015 was close to the average of 23 earthquakes over the previous 40 years. Seismic activity was above average in 2016 with 872 located earthquakes of which 31 events had M_L ≥ 2.5. The strongest event in the analyzed period was the M_L 4.1 Salgesch earthquake, which occurred northeast of Sierre (VS) in October 2016. The event was felt in large parts of Switzerland and had a maximum intensity of V. Derived focal mechanisms and relative hypocenter relocations of aftershocks image a SSE dipping reverse fault, which likely also hosted an M_L 3.9 earthquake in 2003. Another remarkable earthquake sequence in the Valais occurred close to Sion with four felt events (M_L 2.7–3.2) in 2015/16. We associate this sequence with a system of WNW-ESE striking fault segments north of the Rhône valley. Similarities with a sequence in 2011, which was located about 10 km to the NE, suggest the existence of an en-echelon system of basement faults accommodating dextral slip along the Rhône-Simplon line in this area. Another exceptional earthquake sequence occurred close to Singen (Germany) in November 2016. Relocated hypocenters and focal mechanisms image a SW dipping transtensional fault segment, which is likely associated with a branch of the Hegau-Bodensee Graben. On the western boundary of this graben, micro-earthquakes close to Schlattingen (TG) in 2015/16 are possibly related to a NE dipping branch of the Neuhausen Fault. Other cases of earthquakes felt by the public during 2015/16 include earthquakes in the region of Biel, Vallorcine, Solothurn, and Savognin.     

Collaborative validation of GlobeLand30:Methodology and practices

30-m Global Land Cover(GLC)data products permit the detection of land cover changes at the scale of most human land activities,and are therefore used as fundamental information for sustainable development,environmental change studies,and many other societal benefit areas.In the past few years,increasing efforts have been devoted to the accuracy assessment of GlobeLand30 and other finer-resolution GLC data products.However,most of them were conducted either within a limited percentage of map sheets selected from a global scale or in some individual countries(areas),and there are still many areas where the uncertainty of 30-m resolution GLC data products remains to be validated and documented.In order to promote a comprehensive and collaborative validation of 30-m GLC data products,the GEO Global Land Cover Community Activity had organized a project from 2015 to 2017,to examine and explore its major problems,including the lack of international agreed validation guidelines and on-line tools for facilitating collaborative validation activities.With the joint effort of experts and users from 30 GEO member countries or participating organizations,a technical specification for 30-m GLC validation was developed based on the findings and experiences.An on-line validation tool,GLCVal,was developed by integrating land cover validation procedures with the service computing technologies.About 20 countries(regions)have completed the accuracy assess-ment of GlobeLand30 for their territories with the guidance of the technical specification and the support of GLCVal.     

Late Pleistocene to Holocene vegetation and climate changes in northwestern Chukotka (Far East Russia) deduced from lakes Ilirney and Rauchuagytgyn pollen records

This paper presents two new pollen records and quantitative climate reconstructions from northern Chukotka documenting environmental changes over the last 27.9 ka. Open tundra- and steppe-like habitats dominated between 27.9 and 18.7 cal. ka BP. Betula and Alnus shrubs might have grown in sheltered microhabitats but disappeared after 18.7 cal. ka BP. Although the climate was rather harsh, local herb-dominated communities supported herbivores as is evident by the presence of coprophilous spores in the sediments. The increase in Salix and Cyperaceae ~16.1 cal. ka BP suggests climate amelioration. Shrub Betula appeared ~15.9 cal. ka BP, and became dominant after ~15.52 cal. ka BP, whilst typical steppe communities drastically reduced. Very high presence of Botryococcus in the Lateglacial sediments reflects widespread shallow habitats, probably due to lake level increase. Shrub Alnus became common after ~13 cal. ka BP reflecting further climate amelioration. Simultaneously, herb communities gradually decreased in the vegetation reaching a minimum ~11.8 cal. ka BP. A gradual decrease of algae remains suggests a reduction of shallow-water habitats. Shrubby and graminoid tundra was dominant ~11.8–11.1 cal. ka BP, later Salix stands significantly decreased. The forest-tundra ecotone established in the Early Holocene, shortly after 11.1 cal. ka BP. Low contents of green algae in the Early Holocene sediments likely reflect deeper aquatic conditions. The most favourable climate conditions were between ~10.6 and 7 cal. ka BP. Vegetation became similar to the modern after ~7 cal. ka BP but Pinus pumila came to the Ilirney area at about 1.2 cal. ka BP. It is important to emphasize that the study area provided refugia for Betula and Alnus during MIS 2. It is also notable that our records do not reflect evidence of Younger Dryas cooling, which is inconsistent with some regional environmental records but in good accordance with some others.     

On Empirical Correlations for Normalised Shear Strengths from Fall Cone and Direct Simple Shear Tests in Soft Swedish Clays

Empirical correlations provide valuable information in early design stages, and they help to validate or discard single values from site investigations. This paper presents a multivariate database from commercial projects consisting of evaluated shear strengths obtained from direct simple shear tests and fall cone tests (which are calibrated to the field vane test), including index tests. The multivariate database is used to investigate the performance of common transformation models and to test the recommended correction for fall cone tests. It is found that the measured normalised shear strength evaluated from direct simple shear tests and fall cone tests is correlated to the liquid limit and that the results conform to Swedish and Norwegian recommendations. However, the scatter is large, more for fall cone tests than for direct simple shear tests, which is thought to depend mainly on sample disturbance. It can however be concluded that the trend of normalised shear strengths increases with increasing plasticity.