Talklüfte im Zentralen Aaregranit der Schöllenen-Schlucht (Kanton Uri, Schweiz)

The Schöllenen Gorge in the Reuss Valley of the Central Swiss Alps (Figs. 1 and 2) is a famous tourist attraction and ideal location for the study of the properties and formation mechanisms of uplift and post-uplift unloading joints. The gorge is situated in the southern part of the Central Aar Granite, a granitic batholith which intruded about 300 million years ago. The magmatic fabric of this batholith (Fig. 4) has only been locally modified during Alpine tectonic and metamorphic overprinting, mainly in the vicinity of ductile-brittle shear zones. The up to 600 m deep gorge provides an ideal opportunity to study the complex fracture systems of the batholith, and tunnels of the Göschenen hydropower system allow the study of the fracture patterns below ground surface. Outcrop, tunnel and remote mapping of fractures in the study area lead to the recognition of two probably syntectonic (Oligocene-Miocene) joint sets (S and Q joints) and three generations of uplift and post-uplift joints (unloading joints). The frequent S joints run nearly parallel to the Alpine schistosity, i.e. striking approximately E–W and dipping steeply to the south (Figs. 5 and 7). The less frequent Q joints dip steeply to SW; the angle between the two joint sets ranges between 60 and 80 degrees. The first generation of uplift joints (called L- joints) is subhorizontal and probably related to Alpine extensional veins filled with fissure quartz (Zerrklüfte). These veins formed during the late Alpine (Miocene) uplift of the Aar Granite (Mullis 1996). A first generation of post-uplift joints (T₁ joints) strikes parallel to the valley axes and dip with 30–45 degrees towards the valley bottom. This set probably formed during an earlier stage of glacial valley erosion in the Pleistocene (Figs. 9–11). The youngest generation of post-uplift joints (T₂ joints) is orientated parallel to the present ground surface of the Schöllenen Gorge and to erosional surfaces with glacial striations (Figs. 9–11 and 21). The frequency and size of these joints seems to decrease with depth below the ground surface. In one tunnel, post-uplift joints could be observed within a horizontal and vertical distance from the ground surface of 150 and 80 meters. Post-uplift joints only form in granites with a primary fabric that has not been intensively overprinted by brittle or ductile Alpine tectonic deformations. Fractographic investigations, i.e. investigations of crack propagation markers on joint surfaces, confirm this relative age of the fracture sets and give valuable insights into the formation mechanisms of post-uplift joints. Post-uplift joints show intense and 5–10 meter long plumose markings and only rarely arrest lines (Figs. 18a and 20). It can be shown that sets of post-uplift joints join at pre-existing (uplift and syntectonic) fractures to form large (50–100 m sized) curved exfoliation structures (Fig. 19). The growth direction of the post-uplift joints is mainly in subhorizontal directions (Figs. 19 and 20). Fractographic markings, spatial and depth distributions as well as the relative size of post-uplift fractures are explained within the mechanical framework of uniaxial and biaxial compression tests on intact granite samples and samples with artificial flaws. Most of these experiments have been carried out in the framework of studies related to brittle failure (spalling and rockbursting) around deep mining drifts and tunnels in hard rock’s (e.g. Hoek & Bieniawski 1965, Read et al. 1998, Eberhardt et al. 1999). As suggested already by Holzhausen & Johnson (1979), post-uplift fractures form as extension fractures in a compressive stress field with small confining stress. Laboratory tests carried out on artificial Griffith cracks suggest that the macroscopic fracture size is mainly controlled by the ratio of the smallest to the largest principal stress (σ₃/σ₁), the so-called spalling limit. In steep slopes this ratio should increase with depth below ground surface (Fig. 24c), leading to smaller exfoliation fractures with increasing depth. The spatial occurrence of post-uplift fractures along the surface topography is a function of the deviatoric stress level (Fig. 24a) and/or the development of local tensile stresses (Fig. 24d). Preliminary numerical simulations of these failure criteria in a multistage glacial erosion model (Fig. 23) allow some of the observed patterns of post-uplift fracture distributions to be reproduced. post-uplift joints in steep glacial valleys play an important role in valley erosion and in connection with the risk of rock falls, the safety of traffic corridors, and the inflow of water to near-surface tunnels and hydropower caverns. The depth dependant sizes, frequencies and hydraulic conductivities of these fractures can be directly related to the occurrence and magnitudes of the corresponding hazards.     

Occurrence of gorgosterol in diatoms of the genus Delphineis

The presence of the C₃₀ sterol gorgosterol (22,23-methylene-23,24-dimethylcholest-5-en-3ß-ol) and its analogues in some marine and freshwater environments is generally associated with invertebrate animals or dinoflagellates since there have been no reports of them in other microalgal classes. Here we show that two unialgal cultures of different species of the marine diatom Delphineis contain gorgosterol in addition to sterols more commonly found in diatoms. Our findings suggest that some reports of gorgosterol in seawater and marine sediments may well have an origin, at least in part, from diatoms.     

Impact of temperature on long chain diol and mid-chain hydroxy methyl alkanoate composition in Proboscia diatoms: Results from culture and field studies

Long chain 1,14-diols and 12-hydroxy methyl alkanoates are biomarker lipids for Proboscia diatoms and occur widely in Quaternary sediments. To determine the effect of temperature on the lipid composition of these algae, a new Proboscia sp. culture grown at 8 °C and Proboscia indica cultures grown at 18, 21, 24 and 27 °C were examined. The results were combined with lipid data from a P. indica culture and a Proboscia alata culture, grown at 20 and 2 °C, respectively, from previous studies. The data showed a strong relationship between long chain diol and 12-hydroxy methyl alkanoate composition and growth temperature, i.e. the chain length increases and the degree of unsaturation of long chain 1,14-diols decreases with increasing growth temperature. To determine the effect of temperature on Proboscia lipid compositions in natural environments, we also analyzed fossil long chain 1,14-diols and 12-hydroxy methyl alkanoates in surface sediments derived from Proboscia diatoms living in the water column of the eastern South Atlantic. The results indicate a significant relationship between sea surface temperature and chain length distribution of saturated long chain diols, but also suggest that the relative abundances of unsaturated long chain diols and 12-hydroxy methyl alkanoates in sediments are predominantly determined by factors other than temperature.     

Sources and composition of organic matter for bacterial growth in a large European river floodplain system (Danube, Austria)

Dissolved and particulate organic matter (DOM and POM) distribution, lignin phenol signatures, bulk elemental compositions, fluorescence indices and microbial plankton (algae, bacteria, viruses) in a temperate river floodplain system were monitored from January to November 2003. We aimed to elucidate the sources and compositions of allochthonous and autochthonous organic matter (OM) in the main channel and a representative backwater in relation to the hydrological regime. Additionally, bacterial secondary production was measured to evaluate the impact of organic carbon source on heterotrophic prokaryotic productivity. OM properties in the backwater tended to diverge from those in the main channel during phases without surface water connectivity; this was likely enhanced due to the exceptionally low river discharge in 2003. The terrestrial OM in this river floodplain system was largely derived from angiosperm leaves and grasses, as indicated by the lignin phenol composition. The lignin signatures exhibited significant seasonal changes, comparable to the seasonality of plankton-derived material. Microbially-derived material contributed significantly to POM and DOM, especially during periods of low discharge. High rates of bacterial secondary production (up to 135 μg C L(-1) d(-1)) followed algal blooms and suggested that autochthonous OM significantly supported heterotrophic microbial productivity.     

Natural radiation and its hazard in copper ore mines in Poland

The doses of gamma radiation, concentrations of radium isotopes in water and sediments, radon concentration and concentration of alpha potential energy of radon decay products in the copper ore mine and in the mining region in the vicinity of Lubin town in Poland are presented. These data served as a basis for the assessment of radiological hazard to the mine workers and general public. The results of this assessment indicate that radiological hazard in the region does not differ substantially from typical values associated with natural radiation background. The calculated average annual effective dose for copper miners is 1.48 mSv. In general, copper ore mines can be regarded as radiologically safe workplaces.     

Suspended sediment fluxes at an intertidal flat: The shifting influence of wave,wind, tidal,and freshwater forcing

Using in situ, continuous, high frequency (8–16 Hz) measurements of velocity, suspended sediment concentration (SSC), and salinity, we investigate the factors affecting near-bed sediment flux during and after a meteorological event (cold front) on an intertidal flat in central San Francisco Bay. Hydrodynamic forcing occurs over many frequency bands including wind wave, ocean swell, seiching (500–1000 s), tidal, and infra-tidal frequencies, and varies greatly over the time scale of hours and days. Sediment fluxes occur primarily due to variations in flow and SSC at three different scales: residual (tidally averaged), tidal, and seiching. During the meteorological event, sediment fluxes are dominated by increases in tidally averaged SSC and flow. Runoff and wind-induced circulation contribute to an order of magnitude increase in tidally averaged offshore flow, while waves and seiching motions from wind forcing cause an order of magnitude increase in tidally averaged SSC. Sediment fluxes during calm periods are dominated by asymmetries in SSC over a tidal cycle. Freshwater forcing produces sharp salinity fronts which trap sediment and sweep by the sensors over short (∼30 min) time scales, and occur primarily during the flood. The resulting flood dominance in SSC is magnified or reversed by variations in wind forcing between the flood and ebb. Long-term records show that more than half of wind events (sustained speeds of greater than 5 m/s) occur for 3 h or less, suggesting that asymmetric wind forcing over a tidal cycle commonly occurs. Seiching associated with wind and its variation produces onshore sediment transport. Overall, the changing hydrodynamic and meteorological forcing influence sediment flux at both short (minutes) and long (days) time scales.     

Quantifying the effects of three-dimensional subsurface heterogeneity on Hortonian runoff processes using a coupled numerical,stochastic approach

The impact of three-dimensional subsurface heterogeneity in the saturated hydraulic conductivity on hillslope runoff generated by excess infiltration (so-called Hortonian runoff) is examined. A fully coupled, parallel subsurface–overland flow model is used to simulate runoff from an idealized hillslope. Ensembles of correlated, Gaussian random fields of saturated hydraulic conductivity are used to create uncertainty in spatial structure. A large number of cases are simulated in a parametric manner with the variance of the hydraulic conductivity varied over orders of magnitude. These cases include rainfall rates above, equal and below the geometric mean of the hydraulic conductivity distribution. These cases are also compared to theoretical representations of runoff production based on simple assumptions regarding (1) the rainfall rate and the value of hydraulic conductivity in the surface cell using a spatially-indiscriminant approach; and (2) a percolation-theory type approach to incorporate so-called runon. Simulations to test the ergodicity of hydraulic conductivity on hillslope runoff are also performed. Results show that three-dimensional stochastic representations of the subsurface hydraulic conductivity can create shallow perching, which has an important effect on runoff behavior that is different than previous two-dimensional analyses. The simple theories are shown to be very poor predictors of the fraction of saturated area that might runoff due to excess infiltration. It is also shown that ergodicity is reached only for a large number of integral scales (∼30) and not achieved for cases where the rainfall rate is less than the geometric mean of the saturated hydraulic conductivity.     

Testing the robustness of semi-empirical sea level projections

We determine the parameters of the semi-empirical link between global temperature and global sea level in a wide variety of ways, using different equations, different data sets for temperature and sea level as well as different statistical techniques. We then compare projections of all these different model versions (over 30) for a moderate global warming scenario for the period 2000–2100. We find the projections are robust and are mostly within ±20% of that obtained with the method of Vermeer and Rahmstorf (Proc Natl Acad Sci USA 106:21527–21532, 2009), namely ~1 m for the given warming of 1.8°C. Lower projections are obtained only if the correction for reservoir storage is ignored and/or the sea level data set of Church and White (Surv Geophys, 2011) is used. However, the latter provides an estimate of the base temperature T ₀ that conflicts with the constraints from three other data sets, in particular with proxy data showing stable sea level over the period 1400–1800. Our new best-estimate model, accounting also for groundwater pumping, is very close to the model of Vermeer and Rahmstorf (Proc Natl Acad Sci USA 106:21527–21532, 2009).     

Improving a subgrid runoff parameterization scheme for climate models by the use of high resolution data derived from satellite observations

In this study it is shown that the availability of a very high resolution dataset of land surface characteristics leads to the improvement of a surface runoff parameterization scheme. The improved parameterization scheme was developed for application in global and regional climate models and is a further development of the Arno scheme that is widely used in climate models. Here, surface runoff is computed as infiltration excess from a "bucket" type reservoir which takes the subgrid variability of soil saturation within a model gridbox into account. Instead of prescribing a distribution of subgrid scale soil water capacities as in the original Arno scheme, the array of high resolution soil water capacities taken from a global 1 km dataset of land surface parameters is used to obtain individual fractional saturation curves for each model gridbox. From each saturation curve, the three parameters (a shape parameter describing the shape of the subgrid distribution of soil water capacities, subgrid minimum and maximum soil water capacity) required in the modified formulation of the scheme are derived via optimization. As in the original Arno scheme applied in the ECHAM general circulation model and the REMO regional climate model, topography variations will influence the distribution of saturated subgrid areas within a model gridbox. At most gridboxes the net effect of these changes is such that more runoff is produced for high soil water contents and less runoff for low soil water contents. A validation of simulated discharge computed with a simplified land surface scheme applied to reanalysis data of the European Centre for Medium-Range Weather Forecasts and a hydrological discharge model has shown that these changes lead to a more realistic simulation of the annual cycle of discharge for several catchments. In particular this could be shown for the Yangtze Kiang and Amur catchments where adequate input data are available.