Spatial and temporal variation in subtidal molluscan diversity amongst temperate estuarine habitats

Effective management of marine ecosystems is enhanced when detailed information on biodiversity is available. Key information to underpin management actions and conservation planning includes relationships between species assemblages and environmental gradients, and information on species distributions. We conducted a subtidal biodiversity assessment of surface‐dwelling subtidal molluscs in eight a priori defined habitat types using underwater visual censuses to quantitatively explore relationships between molluscan assemblages, and their correlation with benthic habitats and abiotic variables. In addition, variations in diversity were examined for two key habitat types (areas dominated by Dendronephthya australis and by filter feeders) over a period of 15 months to examine temporal change. We found that molluscs form distinct assemblages within subtidal habitats, but that assemblages within key habitats show inherent temporal variability. Regional (gamma) diversity of molluscs was found to result from a combination of: (i) within habitat alpha diversity, which increased with habitat complexity; (ii) between habitat beta diversity, with significant differences in molluscan assemblages amongst habitats with differing benthic growth, substrate type, and depth; and (iii) temporal beta diversity, with significant changes detected in molluscan assemblages over time. The results demonstrate how habitats and abiotic variables (principally depth and substrate type) combine to contribute to molluscan biodiversity in temperate estuaries, and illustrate the value of these factors as surrogates for surface‐dwelling subtidal molluscs in conservation planning.     

Measurement and modeling of bed shear stress under solitary waves

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.     

Nickel-copper mineralization at Talnotry,Newton Stewart,Scotland

Summary Nickel-copper mineralization occurs near the base of a diorite intrusion close to its contact with hornfelsed Ordovician and Silurian shales and greywackes. The principal ore minerals are nickeline, gersdorffite, pyrrhotine, pentlandite and chalcopyrite with minor amounts of molybdenite, tellurobismutite, gold, sphalerite and argentopentlandite. Pyrite, marcasite, violarite and goethite also occur but are interpreted as later alteration products. Much of the pyrrhotine-rich mineralization at the base of the intrusion is in the form of blebs and interstitial aggregates with amphiboles, plagioclase feldspar, biotite, chlorite and quartz. Chalcopyrite-rich and nickeline-gersdorffite-rich mineralization occurs above this and immediately below unmineralized diorite in the form of patches, lenticular masses and stringers along joints and fractures.Whole rock and ore analyses and electron microprobe data on the silicates, sulphides and sulpharsenides are presented.The unmineralized diorite has low SiO₂ and high MgO contents compared to typical diorites and relatively high Cr, Ni and Ti trace element values. In the mineralized diorite, platinum-group elements occur in very low concentrations in the pyrrhotineand chalcopyrite-rich assemblages but Pt, Pd and Au show significant enrichment in the nickeline-gersdorffite-rich mineralization.A magmatic origin for the mineralization is proposed rather than formation by hydrothermal solutions or metasomatism.

---

Die nickel-kupfer vererzung von Talnotry, Newton Stewart, Schottland

Zusammenfassung Die Nickel-Kupfer Vererzung befindet sich im Kontaktbereich einer Dioritintrusion mit hornfelsdurchdrungenen silurischen und ordovizischen Grauwacken. Die am häufigsten auftretenden Erzmineralien sind Nickelin, Gersdorffit, Pyrrhotin, Pentlandit, und Chalcopyrit mit kleineren Mengen von Molybdenit, Tellurwismuth, Gold, Sphalerit und Argentopentlandit. Weiters treten als spätere Umwandlungsprodukte Pyrit, Markasit, Violarit und Goethit auf. Ein großer Teil der Pyrrhotin-reichen Vererzung am Fuße des eingedrungenen Diorits bildet fleckige, lückenfüllende Aggregate zwischen den Silikatphasen (Amphibol, Plagioklas, Biotit, Chlorit, Quarz). Die Chalcopyrit- und Nickelin-Gersdorffit-reiche Vererzung tritt zwischen dem unvererzten Diorit im Hangenden und der Pyrrhotin-reichen Vererzung im Liegenden als linsige, lappenartige Konzentration und entlang von Fugen und Brücken auf.Vollgesteins-Analysen sowie ausgewählte Erzanalysen und Mikrosondenergebnisse der Silikate, Sulfide und Sulfarsenide liegen vor.Im Unterschied zu den typischen Dioriten zeigt der unvererzte Diorit einen niedrigen SiO₂ und hohen MgO Gehalt und relativ hohe Cr, Ni und Ti Spurenelementwerte. Die Platingruppenelemente sind in den Pyrrhotin- und Chalcopyrit-reichen Vererzungen nur schwach vertreten, jedoch sind Pt, Pd und An in der Gersdorffit-reichen Vererzung stark angereichert.Ein magmatischer Ursprung dieser Vererzung, im Gegensatz zu einer metasomatischen Entstehung oder Bildung aus hydrothermalen Lösungen wird vermutet.

---

---

With 3 Figures     

Building capacity for integrated coastal management in developing countries

The need for building human and institutional capacity has been identified in Agenda 21 of the UNCED conference as well as by a number of international environmental institutions as essential for integrated coastal management (ICM) and sustainable development in developing coastal states. There is a growing need for coastal management practitioners and organizations with expertise in planning and implementation for ICM. The application of strategies for institutional development and building human capacity in coastal management and other fields shows that short-term intensive training efforts and long-term institutional strengthening programs are appropriate to address the issues and needs of ICM. An overview of the experience of the URI/USAID International Coastal Resources Management Program in Sri Lanka, Thailand and Ecuador presents lessons learned for strengthening ICM efforts in developing countries.     

Current-influenced depositional provinces, continental margin off Cape Hatteras, identified by petrologic method

Analyses of DSRV “Alvin” core samples on the Cape Hatteras margin indicate major textural and compositional changes at depths of about 1000 and well below 2500 m. The distribution patterns of petrologic parameters correlate well with water mass flow and suspended-sediment plumes measured on this margin by other workers. Our study also shows: (a) vigorous erosion and sediment transport at depths of less than 400 m resulting from the NE-trending Gulf Stream flow; (b) deposition, largely planktonic-rich sediment released from the Gulf Stream, on the upper- to mid-slope, to depths of about 800–1200 m; (c) winnowing, resuspension and deposition induced by periodically intensified slope currents on the mid-slope to uppermost rise, between about 1000 and 2500 m; and (d) prevailing deposition on the upper rise proper (below 2500 m), from transport by the SW-trending Western Boundary Undercurrent. Sediments moved by bottom currents have altered the composition and distribution patterns of material transported downslope by offshelf spillover; this mixing of gravity-emplaced and bottom-current-transported sediment obscures depositional boundaries. Moreover, reworking of the seafloor by benthic organisms alters physical properties and changes erodability of surficial sediments by bottom currents. Measurement of current flow above the seafloor and direct observation of the bottom are insufficient to delineate surficial sediment boundaries. Detailed petrologic analyses are needed to recognize the long-term signature of processes and define depositional provinces.     

Artificial Reefs in the Low Productive Marine Environments of the Southeastern Mediterranean

Abstract. Fishery yields in the oligotrophic waters of the Southeastern Mediterranean arc low due to habitat and food limitations. A four year study of a complex of artificial structures established in the coastal waters of Israel points to several possible solutions to these problems. One approach is the artificial enrichment of the man-made reef with trash fish. This, together with the configuration of the reef, caused a significant increase in the abundance of fish predators such as groupers of the genus Epinephclus. Omnivores and herbivores were attracted only by the presence of artificial structures. Some species, such as the slipper lobster Scyllurides lulus, only use the man-made reef for shelter during part of the day or season; they forage over a much larger area the rest of the time and are important "importers" of food to the artificial habitat. Artificial kelp were effective in recruiting juveniles and small fishes to the site.     

Trends and evolution of contamination in a well-dated water reservoir sedimentary archive: the Brno Dam, Moravia, Czech Republic

The sedimentary record from dams can provide important information about stratigraphy and pollution history of densely populated river basins. The Brno Dam is a small reservoir within the Morava River catchment (Czech Republic) accumulating lacustrine sediments since 1940 (dam filling). The stratigraphy of the dam sediments was studied using multiproxy stratigraphic analysis (X-ray densitometry, bulk magnetic susceptibility, diffuse spectral reflectance and cation-exchange capacity) of five sediment cores supported by ground-penetration radar sections. Concentrations of heavy metals were studied by X-ray fluorescence analysis. The thickness of the dam sediments decreases from 220 cm in the proximal part, near the feeder, to only 10 cm in the distal part, near the dyke. Sediments consist predominantly of finely-laminated silty sands, silts and clays. The sedimentation rate for the last ~22 years, inferred from ¹³⁷Cs dating, decreases from 4.2 cm per year in the proximal part of the dam to 0.29 cm per year in its distal part. Distinct long-term trends were found in the depth profiles of heavy metal concentrations. The heavy metal contents increase significantly after 1940 in all cores, with peak concentrations confined to layers deposited in the 1960s and 1980s. A decreasing trend occurred after 1989 (the decline in Czech heavy industry). The results also show that heavy metal contamination is dependent on lithology (hyperpycnal flow layers related to floods). Increased concentrations of phosphorus in the sediments indicate long-term eutrophication of the dam. Despite the recent decreasing trends in heavy metal concentrations the phosphorus contents remain high in recent years and have caused persisting problems with algal growth in the dam mentioned by previous authors.