Modification of fluid inclusions in quartz by deviatoric stress I: experimentally induced changes in inclusion shapes and microstructures

Fluid inclusions in quartz are known to modify their shapes and microstructures (textures) during weak plastic deformation. However, such changes have not been experimentally demonstrated and criteria are not available to relate them to paleostress conditions. To address these issues, quartz crystals containing natural CO₂–H₂O–NaCl fluid inclusions have been experimentally subjected to compressive deviatoric stresses of 90–250 MPa at 700°C and ~600 MPa confining pressure. Strains of up to 1% cause the inclusions to develop irregular shapes and to generate microcracks in crystallographic planes oriented subperpendicular to the major compression axis, σ ₁. The uniform alignment of the microcracks imparts a planar fabric to the samples. The microcracks heal and form swarms of tiny satellite inclusions. These new inclusions lose H₂O by diffusion, thereby triggering plastic deformation of the surrounding quartz via H₂O-weakening. Consequently, the quartz samples deform plastically only in domains originally rich in inclusions. This study shows that fluid inclusions deformed by deviatoric stresses may indeed record information on paleostress orientations and that they play a key role in facilitating crystal-plastic deformation of quartz.     

Thermodynamic data from redox reactions at high temperatures. II. The MnO-0Mn3O4 oxygen buffer,and implications for the thermodynamic properties of MnO and Mn3O4

The \(\mu _{O_2 } \) defined by the reaction 6 MnO+O₂ =2 Mn₃O₄ has been determined from 917 to 1,433 K using electrochemical cells (with calcia-stabilized zirconta, CSZ) of the type: Steady emfs were achieved rapidly at all temperatures on both increasing and decreasing temperature, indicating that the MnO-Mn₃O₄ oxygen buffer equilibrates relatively easily. It therefore makes a useful alternative choice in experimental petrology to Fe₂O₃-Fe₃O₄ for buffering oxygen potentials at oxidized values. The results are (in J/mol, temperature in K, reference pressure 1 bar); \(\mu _{O_2 } \) (±200)=-563,241+1,761.758T-220.490T inT+0.101819T ² with an uncertainty of ±200 J/mol. Third law analysis of these data, including a correction for the deviations in stoichiometry of MnO, impliesS _298.15 for Mn₃O₄ of 166.6 J/K · mol, which is 2.5 J/K · mol higher than the calorimetric determination of Robie and Hemingway (1985). The low value of the calorimetric entropy may be due to incomplete ordering of the magnetic spins. The third law value of Δ _r H _298.15 ⁰ is-450.09 kJ/mol, which is significantly different from the calorimetric value of-457.5±3.4 kJ/mol, calculated from Δ _f H _298.15 ⁰ of MnO and Mn₃O₄, implying a small error in one or both of these latter.     

Optimization of reinforced soil embankments by genetic algorithm

A Genetic Algorithm (GA) is described, which produces solutions to the cost optimization problem of reinforcement layout for reinforced soil slopes. These solutions incorporate different types of reinforcement within a single slope. The GA described is implemented with the aim of optimizing the cost of materials for the preliminary layout of reinforced soil embankments. The slope design method chosen is the U.K. Department of Transport HA 68/94 ‘Design Methods for the Reinforcement of Highway Slopes by Reinforced Soil and Soil Nailing Techniques’. The results confirm that there is a role for the GA in optimization of reinforced soil design. Copyright © 2000 John Wiley & Sons, Ltd.     

Radiocarbon wiggle matching of Swedish lake varves reveals asynchronous climate changes around the 8.2 kyr cold event

Snowball, I., Muscheler, R., Zillén, L., Sandgren, P., Stanton, T. & Ljung, K. 2010: Radiocarbon wiggle matching of Swedish lake varves reveals asynchronous climate changes around the 8.2 kyr cold event. Boreas, Vol. 39, pp. 720–733. 10.1111/j.1502‐3885.2010.00167.x. ISSN 0300‐9483. A series of nine radiocarbon measurements obtained at increments of 50 years was used to wiggle match varved sediments in Lake Kälksjön (west central Sweden) to the calendar year time scale provided by the tree‐ring‐derived radiocarbon calibration curve. The anchor point for a series of 400 varves known to span the ‘8.2 kyr cold event’ was derived from a combination of correlation analysis, Monte Carlo statistics and Bayesian age modelling. The GRIP and NorthGRIP ice‐cores were matched to the same absolute time scale by comparing ¹⁰Be data and tree‐ring Δ¹⁴C. The radiocarbon‐based wiggle match, organic carbon measurements, mineral magnetic parameters and XRF data reconstruct a distinct period of enhanced erosion in Kälksjön's catchment between 8066 ± 25 and 7920 ± 25 cal. yr BP. Prior to human impact, the increased erosion in the boreal environment is assigned to increased winter precipitation in the form of snow, which caused spring meltwater discharge to intensify. Our results suggest that the abrupt onset of increased winter precipitation in west central Sweden started at least 50 years after the onset of the ‘8.2 kyr cold event’ as defined by oxygen isotope data from Greenland. The study highlights the value of synchronized time scales in the reconstruction of abrupt climate changes based on proxy data.     

Pseudosection modelling for a selected eclogite body from the Koralpe (Hohl), Eastern Alps

In the Kor-, Saualpe and Pohorje regions of the Eastern Alps eclogite bodies occur within metapelitic gneisses. The bodies are between 1 meter and several hundreds of meters in size and some of them were defined by Haüy (1822) as the type locality for the rock type “eclogite”. A growing body of petrological work has documented the metamorphic evolution of the metapelites surrounding the eclogites. However, few phase diagrams have been constructed for the eclogite bodies themselves. Here we use recently available activity models for amphiboles to present new thermodynamic pseudosections for the Hohl locality of the Koralpe eclogites. We show that this eclogite reached peak conditions in a narrow PT field obliquely oriented in PT space between 16.5 and 20.5 kbar and 620°C to 720°C and that its metamorphic evolution was likely to have occurred under water saturated conditions. We conclude that eclogite and the surrounding metapelites have certainly undergone the same metamorphic peak in Eo-alpine time. Comparison of our results with different PT estimates on the eclogite from Pohorje, suggest that a PT gradient from Koralpe to Pohorje is likely.     

The DAV and Periadriatic fault systems in the Eastern Alps south of the Tauern window

Alpine deformation of Austroalpine units south of the Tauern window is dominated by two kinematic regimes. Prior to intrusion of the main Periadriatic plutons at ~30 Ma, the shear sense was sinistral in the current orientation, with a minor north-side-up component. Sinistral shearing locally overprints contact metamorphic porphyroblasts and early Periadriatic dykes. Direct Rb-Sr dating of microsampled synkinematic muscovite gave ages in the range 33-30 Ma, whereas pseudotachylyte locally crosscutting the mylonitic foliation gave an interpreted ⁴⁰Ar-³⁹Ar age of ~46 Ma. The transition from sinistral to dextral (transpressive) kinematics related to the Periadriatic fault occurred rapidly, between solidification of the earlier dykes and of the main plutons. Subsequent brittle-ductile to brittle faults are compatible with N-S to NNW-SSE shortening and orogen-parallel extension. Antithetic Riedel shears are distinguished from the previous sinistral fabric by their fine-grained quartz microstructures, with local pseudotachylyte formation. One such pseudotachylyte from Speikboden gave a ⁴⁰Ar-³⁹Ar age of 20 Ma, consistent with pseudotachylyte ages related to the Periadriatic fault. The magnitude of dextral offset on the Periadriatic fault cannot be directly estimated. However, the jump in zircon and apatite fission-track ages establishes that the relative vertical displacement was ~4-5 km since 24 Ma, and that movement continued until at least 13 Ma.     

Modélisation géométrique 3D des granites stéphaniens du massif du Pelvoux (Alpes,France)

The structural analysis and the 3D modelling of Stephanian granites of the Pelvoux Massif characterize an emplacement along sinistral NW–SE- and dextral NE–SW-trending shear zones in the Pelvoux and in the Aiguilles Rouges–Mont Blanc Massifs, respectively. This Carboniferous shear system is consistent with a north–south extension direction known in the whole Variscan belt at this time. To cite this article: P. Strzerzynski et al., C. R. Geoscience 337 (2005).     

Yaxcopoil-1 and the Chicxulub impact

CSDP core Yaxcopoil-1 was drilled to a depth of 1,511 m within the Chicxulub crater. An organic-rich marly limestone near the base of the hole (1,495 to 1,452 m) was deposited in an open marine shelf environment during the latest Cenomanian (uppermost Rotalipora cushmani zone). The overlying sequence of limestones, dolomites and anhydrites (1,495 to 894 m) indicates deposition in various carbonate platform environments (e.g., sabkhas, lagoons). A 100-m-thick suevite breccia (894–794 m) identifies the Chicxulub impact event. Above the suevite breccia is a dolomitic limestone with planktic foraminiferal assemblages indicative of Plummerita hantkeninoides zone CF1, which spans the last 300 ky of the Maastrichtian. An erosional surface 50 cm above the breccia/dolomite contact marks the K/T boundary and a hiatus. Limestones above this contact contain the first Tertiary planktic foraminifera indicative of an upper P. eugubina zone P1a(2) age. Another hiatus 7 cm upsection separates zone P1a(2) and hemipelagic limestones of planktic foraminiferal Zone P1c. Planktic foraminiferal assemblages of Zone Plc to P3b age are present from a depth of 794.04 up to 775 m. The Cretaceous carbonate sequence appears to be autochthonous, with a stratigraphic sequence comparable to late Cretaceous sediments known from outside the Chicxulub crater in northern and southern Yucatan, including the late Cenomanian organic-rich marly limestone. There is no evidence that these sediments represent crater infill due to megablocks sliding into the crater, such as major disruption of sediments, chaotic changes in lithology, overturned or deep dipping megablocks, major mechanical fragmentation, shock or thermal alteration, or ductile deformation. Breccia units that are intercalated in the carbonate platform sequence are intraformational in origin (e.g., dissolution of evaporites) and dykes are rare. Major disturbances of strata by the impact therefore appear to have been confined to within less than 60 km from the proposed impact center. Yaxcopoil-1 may be located outside the collapsed transient crater cavity, either on the upper end of an elevated and tilted horst of the terrace zone, or even outside the annular crater cavity. The Chicxulub site thus records a large impact that predates the K/T boundary impact and mass extinction.     

Sedimentary evolution of a Late Pleistocene temperate red algal reef (Coralligène) on Rhodes,Greece: correlation with global sea‐level fluctuations

Autochthonous red algal structures known as coralligène de plateau occur in the modern warm‐temperate Mediterranean Sea at water depths from 20 to 120 m, but fossil counterparts are not so well‐known. This study describes, from an uplifted coastal section at Plimiri on the island of Rhodes, a 450 m long by 10 m thick Late Pleistocene red algal reef (Coralligène Facies), interpreted as being a coralligène de plateau, and its associated deposits. The Coralligène Facies, constructed mainly by Lithophyllum and Titanoderma, sits unconformably upon the Plio‐Pleistocene Rhodes Formation and is overlain by a Maerl Facies (2 m), a Mixed Siliciclastic‐Carbonate Facies (0·2 m) and an Aeolian Sand Facies (2·5 m). The three calcareous facies, of Heterozoan character, are correlated with established members in the Lindos Acropolis Formation in the north of the island, while the aeolian facies is assigned to the new Plimiri Aeolianite Formation. The palaeoenvironmental and genetic‐stratigraphic interpretations of these mixed siliciclastic‐carbonate temperate water deposits involved consideration of certain characteristics associated with siliciclastic shelf and tropical carbonate shelf models, such as vertical grain‐size trends and the stratigraphic position of zooxanthellate coral growths. Integration of these results with electron spin resonance dates of bivalve shells indicates that the Coralligène Facies was deposited during Marine Isotope Stage 6 to 5e transgressive event (ca 135 to 120 ka), in water depths of 20 to 50 m, and the overlying Maerl Facies was deposited during regression from Marine Isotope Stage 5e to 5d (ca 120 to 110 ka), at water depths of 25 to 40 m. The capping Aeolian Sand Facies, involving dual terrestrial subunits, is interpreted as having formed during each of the glacial intervals Marine Isotope Stages 4 (71 to 59 ka) and 2 (24 to 12 ka), with soil formation during the subsequent interglacial periods of Marine Isotope Stages 3 and 1, respectively. Accumulation rates of about 0·7 mm year^?1 are estimated for the Coralligène Facies and minimum accumulation rates of 0·2 mm year^?1 are estimated for the Maerl Facies. The existence of older red algal reefs in the Plimiri region during at least Marine Isotope Stages 7 (245 to 186 ka) and 9 (339 to 303 ka) is inferred from the occurrence of reworked coralligène‐type lithoclasts in the basal part of the section and from the electron spin resonance ages of transported bivalve shells.