A 4D variational assimilation scheme with partition method for nearshore wave models

This paper summarizes the development steps of a 4D variational assimilation scheme for nearshore wave models. A partition method is applied for adjusting both wave boundary conditions and wind fields. Nonstationary conditions are assimilated by providing defined correlations of model inputs in time. The scheme is implemented into the SWAN model. Twin experiments covering both stationary and nonstationary wave conditions are carried out to assess the adequacy of the proposed scheme. Stationary experiments are carried out considering separately windsea, swells, and mixed sea. Cost functions decline to less than 5% and RMS spectrum errors are reduced to less than 10%. The nonstationary experiment covers 1 day simulation under mixed wave conditions with assimilation windows of 3 h. RMS spectrum errors are reduced to less than 10% after 30 iterations in most assimilation windows. The results show that for spacially uniform model inputs, model accuracy is improved notably by the assimilation scheme throughout the computational domain. It is found that under wave conditions in which observed spectra can be well classified, the assimilation scheme is able to improve model results significantly.     

Analysis of elastic anisotropy of tight sandstone and the influential factors

Tight sandstone has a certain anisotropy. Using ultrasonic measurements of samples in three different directions and related matched experiments, this study systematically analyzes the pore structure and anisotropy of tight sandstone samples obtained from oil fields and compares results with those of shale. Results firstly show that the anisotropy of tight sandstone is mainly related to the compositional layering and thin interbedding which occur in different sedimentary environments. Tight sandstone has typical transverse isotropic medium characteristics, Young’s modulus increases in different directions with increasing confining pressure, Poisson’s ratio change is not obvious, anisotropic coefficients decrease with increasing effective pressure, and a certain linear relationship exists between ε, γ, and δ. This article finally summarizes anisotropy in different areas, thereby providing a foundation for the use of suitable appraisal models in different regions. This research can be used as an experimental reference for logging evaluation, seismic data interpretation, and fracturing develop of tight sandstones.     

Analysis and application of the response characteristics of DLL and LWD resistivity in horizontal well

There exist different response characteristics in the resistivity measurements of dual laterolog (DLL) and logging while drilling (LWD) electromagnetic wave propagation logging in highly deviated and horizontal wells due to the difference in their measuring principles. In this study, we first use the integral equation method simulated the response characteristics of LWD resistivity and use the three dimensional finite element method (3D-FEM) simulated the response characteristics of DLL resistivity in horizontal wells, and then analyzed the response differences between the DLL and LWD resistivity. The comparative analysis indicated that the response differences may be caused by different factors such as differences in the angle of instrument inclination, anisotropy, formation interface, and mud intrusion. In the interface, the curves of the LWD resistivity become sharp with increases in the deviation while those of the DLL resistivity gradually become smooth. Both curves are affected by the anisotropy although the effect on DLL resistivity is lower than the LWD resistivity. These differences aid in providing a reasonable explanation in the horizontal well. However, this can also simultaneously lead to false results. At the end of the study, we explain the effects of the differences in the interpretation of the horizontal well based on the results and actual data analysis.     

Investigation on the efficiency of a silicone antifouling coating in controlling the adhesion and germination of <Emphasis Type="Italic">Ulva prolifera</Emphasis> micro-propagules on rafts

Prevention of annual “green tides” caused by blooms of the green macroalga Ulva prolifera, which have occurred in the Yellow Sea since 2007, has received much attention. Increasing evidence indicates that micro-propagules on the rafts used for Porphyra yezoensis aquaculture along the coastline of Jiangsu Province in China, were the primary source of these green tides. In this study, we investigated the effectiveness of a silicone antifouling coating for preventing the adhesion and germination of U. prolifera micro-propagules on bamboo and nylon ropes, which have been used in rafts for P. yezoensis aquaculture. Our results demonstrated that a coating of silicone (Sylgard 184) containing 1.0 wt.% sodium benzoate (NaB) could reduce the adhesion rate to <5% and completely inhibited the growth of U. prolifera propagules on the coated surfaces. Coating bamboo and nylon ropes with NaB-incorporated silicone thus proved a potentially effective method for controlling the initial biomass accumulation of U. prolifera.     

Processes of initial collision and suturing between India and Asia

The initial collision between Indian and Asian continents marked the starting point for transformation of land-sea thermal contrast, uplift of the Tibet-Himalaya orogen, and climate change in Asia. In this paper, we review the published literatures from the past 30 years in order to draw consensus on the processes of initial collision and suturing that took place between the Indian and Asian plates. Following a comparison of the different methods that have been used to constrain the initial timing of collision, we propose that the tectono-sedimentary response in the peripheral foreland basin provides the most sensitive index of this event, and that paleomagnetism presents independent evidence as an alternative, reliable, and quantitative research method. In contrast to previous studies that have suggested collision between India and Asia started in Pakistan between ca. 55 Ma and 50 Ma and progressively closed eastwards, more recent researches have indicated that this major event first occurred in the center of the Yarlung Tsangpo suture zone (YTSZ) between ca. 65 Ma and 63 Ma and then spreading both eastwards and westwards. While continental collision is a complicated process, including the processes of deformation, sedimentation, metamorphism, and magmatism, different researchers have tended to define the nature of this event based on their own understanding, an intuitive bias that has meant that its initial timing has remained controversial for decades. Here, we recommend the use of reconstructions of each geological event within the orogenic evolution sequence as this will allow interpretation of collision timing on the basis of multidisciplinary methods.     

Oxygen and hydrogen isotopic characterization of rainfall and throughfall in four South Korean cool temperate forests

Understanding the isotopic composition of precipitation in a forested catchment is critical for ecohydrological studies. Changes in the water isotopes of rainfall were assessed during its passage through the canopy in throughfall, and the effect of different forest stands on the isotope composition of throughfall. In a cool temperate forest in Korea, rainfall and throughfall samples collected under Pinus densiflora (red pine), Castanea crenata (chestnut), Robinia pseudoacacia (black locust) and mixed stands (mix of these three species) were analysed for oxygen and hydrogen isotopes. Throughfall δ¹⁸O and δD were enriched compared to rainfall. A difference of δ¹⁸O and δD among throughfall may be related to the difference in interception–storage capacity of different species due to dissimilar canopy characteristics. Since isotopic composition of throughfall and rainfall are different due to canopy isotopic effects, use of rainfall isotopic signatures for ecohydrological studies in forested ecosystem can lead to biases.     

软悬挂状态下隔水管动力特性分析

建立了软悬挂状态下隔水管动力分析模型,采用有限单元法对模型进行离散,结合Newmark-β法对动态方程求解,并对模型进行验证,最后选取南海某口深水井实际参数,对软悬挂状态下隔水管动力特性进行分析。研究结果表明:软悬挂状态下隔水管底端横向位移最大,顶部铰接处弯矩最大。软悬挂状态下,隔水管横向位移与弯矩随着海底隔水管总成(LMRP)重量增加而减小,随着平台运动速度、平台航向与海流方向夹角增大而增大;回收隔水管减小悬挂长度有利于减小最大横向位移,但会造成弯矩轻微增加;采用旋转刚度适当较大的挠性接头则有利于减小隔水管挠性接头以下整体位移与弯矩。研究成果为钻井平台避台撤离时隔水管的安全提供理论指导。     

Spatial and temporal patterns of stable water isotopes along the Yangtze River during two drought years

Changes in the level of the Yangtze River caused by anthropogenic water regulation have major effects on the hydrological processes and water cycle in surrounding lakes and rivers. In this study, we obtained isotopic evidence of changes in the water cycle of Yangtze River during the two drought years of 2006 and 2013. Isotopic evidence demonstrated that the δ¹⁸O and δD levels in Yangtze River exhibited high spatial heterogeneity from the upper to lower reaches, which were controlled by atmospheric precipitation, tributary/lake water mixing, damming regulation, and water temperature. Both the slope and intercept of Yangtze River evaporative line (δD = 7.88 δ¹⁸O + 7.96) were slightly higher than those of local meteoric water line of Yangtze River catchment (δD = 7.41 δ¹⁸O + 6.01). Most of the river isotopic values were located below the local meteoric water line, thereby implying that the Yangtze River water experienced a certain degree of evaporative enrichment on isotopic compositions of river water. The high fluctuations in the isotopic composition (e.g., deuterium excess [d‐excess]) in the middle to lower reaches during the initial stage of operation for the Three Gorges Dams (2003–2006) were due to heterogeneous isotopic signatures from the upstream water. In contrast to the normal stage (after 2010) characterized by the maximum water level and largest water storage, a relatively small variability in the deuterium excess was found along the middle to lower reaches because of the homogenization of reservoir water with a longer residence time and complete mixing. The effects of water from lakes and tributaries on the isotopic compositions in mainstream water were highlighted because of the high contributions of lakes water (e.g., Dongting Lake and Poyang Lake) efflux to the Yangtze River mainstream, which ranged from 21% to 85% during 2006 and 2013. These findings suggest that the retention and regulation of the Three Gorges Dams has greatly buffered the isotopic variability of the water cycle in the Yangtze catchment, thereby improving our understanding of the complex lake–river interactions along the middle to lower reaches in the future.     

九寨沟M_S7.0地震的前兆异常时空演化特征及其分析

以2017年8月8日九寨沟MS7.0地震震中为中心,对震前不同震中距前兆异常的时空演化过程进行分析。研究表明,震中距100km范围内无前兆异常,前兆异常主要分布在震中距100～500km范围内。震前2年新增前兆异常开始逐渐增多;不同震中距范围内的新增异常测项所占比例在震前1.5年左右达到最大,在震前又降低。在震中距300km范围内的异常测项所占比例相对较高。前兆异常时空演化过程存在3个不同的变化阶段,即α阶段(前兆异常的早期阶段,包括α_1和α_2,震前1000天以上)的异常主要分布在震中东北方向和西南方向,异常具有向外扩展的特征;β阶段(前兆异常的中期阶段,震前500～1000天)的异常表现为大范围出现异常;γ阶段(前兆异常的短期阶段,包括γ_1和γ_2,震前500天内)的异常分布在震中的东北方向,表现为远源区的异常向震中收缩过程(γ_1)和近源区的异常向外扩展的过程(γ_2)。通过与其他震例对比分析发现,前兆异常的3个阶段现象可能是大震前的共性特征,大震前前兆异常的显著增加对发震时间的预测具有一定的指示意义。     

Effect of thickness of planar nozzles on erosion depth of levee soils subjected to plunging water

In this study, the effect of the thickness of a planar jet on the erosion depth when the jet impinges on a surface composed of cohesive soil was analytically and numerically evaluated. The results showed that the erosion depth was practically independent of the nozzle thickness for erosion depths shallower than the potential core length (i.e. the region of the jet in which the central flow velocity is the same as the nozzle velocity). The relation between nozzle thickness and erosion depth was non-linear with continuously variable slope for erosion depths deeper than the potential core length. Finally, the relation was approximately linear when the erosion depth converged to the equilibrium erosion depth. The findings of this study indicate that direct and fast prediction of the erosion depth in the field is possible using the data from a small scale soil erosion test with similar flow velocities.