内蒙古地区场地响应区域特征分析

本文以内蒙古地区台站分布、地质构造和地震活动性为基础,将内蒙古的大部地区划分为三个研究区域分别进行了场地响应研究。对近几年积累的大量ML≥3.0级以上地震,共计39个台站记录到的124次地震事件的785条波形,根据S波的观测振幅谱,采用遗传算法分别反演了三个区域的介质非弹性衰减系数和台站场地响应,并对其进行了讨论。本文得到的介质衰减模型和台站场地响应,将对台网测定ML震级需要考虑的量规函数、台站校正值等提供重要参考。研究结果表明:除个别台站存在场地放大或缩小的响应外,绝大多数台站的场地响应表现出一定的区域性特征;西部区域(除极个别台站外)对高频存在明显衰减;中东部区域对整个频段的反映都比较稳定;东部区域对整个频段存在明显放大,这与该区域覆盖层厚度大相吻合。     

班怒带西段尕尔穷铜金矿两套侵入岩源区及其地质意义——来自Hf同位素特征的指示

尕尔穷铜金矿位于班公湖—怒江缝合带西段南缘的措勤—申扎火山岩浆弧内,为与侵入岩有关的矽卡岩型-破碎带型铜金(铁)矿床。在已有石英闪长岩LA-ICP-MS锆石U-Pb测年的基础上,进一步对其进行锆石Hf同位素研究,同时对最新勘查成果显示具有一定成矿潜力的花岗斑岩进行LA-ICP-MS锆石U-Pb定年和Hf同位素研究,确定了两套侵入岩的形成顺序;结合前人总结的岩石地球化学特征,利用Hf同位素对其岩浆源区进行示踪。结果显示:花岗斑岩锆石206Pb/238U年龄加权平均值为(83.2±0.7)Ma,较石英闪长岩晚4 Ma左右,其初始176Hf/177Hf值为0.282 235～0.283 073,εHf(t)值为-17.2～12.5;石英闪长岩锆石初始176Hf/177Hf值为0.282 800～0.283 015,εHf(t)值为3.5～10.5。结合二者地球化学特征显示:石英闪长岩和花岗斑岩可能是同一岩浆系统不同分异阶段的产物,前者主要起源于具有幔源印记的初生地壳,而花岗斑岩具有和石英闪长岩相似的岩浆源区,但明显混入上地壳基底物质;暗示晚白垩世班怒带西段南缘内随着南羌塘—三江复合板片与冈底斯—念青唐古拉板片之间的弧-陆碰撞,先成的具有幔源印记的初生地壳重熔形成岩浆,随着碰撞的继续和岩浆的上涌分异,部分上地壳受挤压或热效应进一步重熔并参与岩浆系统中,由早至晚形成了由幔源特征向幔-壳混合源特征源区逐渐转变的花岗岩演化系列。尕尔穷铜金矿是起源于具有幔源印记的初生地壳的花岗岩的成矿专属性表现。     

Using 4C OBS to reveal the distribution and velocity attributes of gas hydrates at the northern continental slope of South China Sea

To investigate the distribution and velocity attributes of gas hydrates in the northern continental slope of South China Sea, Guangzhou Marine Geological Survey conducted four-component (4C) ocean-bottom seismometer (OBS) surveys. A case study is presented to show the results of acquiring and processing OBS data for detecting gas hydrates. Key processing steps such as repositioning, reorientation, PZ summation, and mirror imaging are discussed. Repositioning and reorientation find the correct location and direction of nodes. PZ summation matches P- and Z-components and sums them to separate upgoing and downgoing waves. Upgoing waves are used in conventional imaging, whereas downgoing waves are used in mirror imaging. Mirror imaging uses the energy of the receiver ghost reflection to improve the illumination of shallow structures, where gas hydrates and the associated bottom-simulating reflections (BSRs) are located. We developed a new method of velocity analysis using mirror imaging. The proposed method is based on velocity scanning and iterative prestack time migration. The final imaging results are promising. When combined with the derived velocity field, we can characterize the BSR and shallow structures; hence, we conclude that using 4C OBS can reveal the distribution and velocity attributes of gas hydrates.     

Proline with or without hydroxyproline influences collagen concentration and regulates prolyl 4-hydroxylase α (I) gene expression in juvenile turbo (Scophthalmus maximus L.)

Journal of Ocean University of China - This study was conducted to investigate the effect of dietary proline (Pro), and Pro and hydroxyproline (Hyp) in combination on the growth performance, total...     

南极GPS数据质量分析

以多路径误差和电离层延迟为评价指标,利用TEQC软件和QCVIEW软件对南极埃默里冰架、内陆冰盖、纳拉峡海湾、拉斯曼丘陵的实测GPS数据以及部分IGS站点的数据进行了数据质量分析,得到结论： 1)在同一站点上,L2上的多路径误差总比L1上的多路径误差要大;2)在南极不同环境下的多路径误差不同;3)纬度和太阳活动剧烈程度是影响南极地区GPS数据电离层延迟大小的两个重要因素。     

Rock magnetic properties and palaeomagnetic results of sediments from a stone implement layer in the Bose Basin,Guangxi

Directional samples were taken to study rock magnetism and palaeomagnetic records from the Dong- sheng profile, which is 5 m thick and on the northwest edge of the Bose Basin. Mineralogy and rock magnetism of typical samples indicate that coarse granular titanomagnetite, and fine-grained hematite, superparamagnetic maghemite formed by pedogenesis are in the sediment, which has undergone many transformative processes during different stages of pedogenesis. Parallel samples were taken for thermal demagnetization (TH) (0 to 680℃) and alternating field (AF) demagnetization (0 to 80 mT) respectively. Experimental results of these two kinds of demagnetization illustrate that there are two or more magnetic components in the samples. Intensity of NRM decreases by almost 60% to 90% rapidly when the temperature ranges from 100℃ to 350℃, with a steady magnetic component. It is impossible to analyze the magnetic components at high temperature because those fluctuate widely when the temperature is higher than 400℃. Steady magnetic components from 100℃ to 350℃ indicate that the remanence was mainly carried by fine-grained hematite formed by pedogenesis, reflecting a change in the geomagnetic field while the magnetite was being oxidized into hematite by chemical weathering after deposition. The formative age of the sediments cannot be obtained by magnetic methods in this profile.     

由岩体失稳讨论地震前兆的复杂性

断层带应变弱化——失稳的地震模式表明,岩体失稳不仅取决于作用的应力水平,而且决定于应变弱化阶段中环境刚度和岩石刚度的相对大小。该模式可能被应用去解释实际观测中出现异常,而其后不发生地震活动的复杂情况。     

Using Array Methods to Identify and Process Weak Signals Generated by the Brightlight(Ⅰ) 50t Explosion

Waveforms generated by the 50t explosion of project Brightlight(Ⅰ) were recorded by HILR array.Using array techniques,the author performed identification,f-k analysis,velocity spectrum analysis,etc.of the weak signals.The analysis results show that the signal-to-noise ratio after beamforming was obviously enhanced,and the signal could be clearly shown.The energy from this explosion was mainly concentrated in the 1 ～ 8Hz range from f-k analysis.The velocity spectrum gave clear positions of event phases,which could not be seen in the original weak signals.The maximum energy distribution obtained by the Beaman method is close to the theoretical value in the azimuth-slowness domain.     

Inverse Analysis of Deep Excavation Using Differential Evolution Algorithm

This paper presents the applications of the differential evolution (DE) algorithm in back analysis of soil parameters for deep excavation problems. A computer code, named Python‐based DE, is developed and incorporated into the commercial finite element software ABAQUS, with a parallel computing technique to run an FE analysis for all trail vectors of one generation in DE in multiple cores of a cluster, which dramatically reduces the computational time. A synthetic case and a well‐instrumented real case, that is, the Taipei National Enterprise Center (TNEC) project, are used to demonstrate the capability of the proposed back‐analysis procedure. Results show that multiple soil parameters are well identified by back analysis using a DE optimization algorithm for highly nonlinear problems. For the synthetic excavation case, the back‐analyzed parameters are basically identical to the input parameters that are used to generate synthetic response of wall deflection. For the TNEC case with a total of nine parameters to be back analyzed, the relative errors of wall deflection for the last three stages are 2.2, 1.1, and 1.0%, respectively. Robustness of the back‐estimated parameters is further illustrated by a forward prediction. The wall deflection in the subsequent stages can be satisfactorily predicted using the back‐analyzed soil parameters at early stages. Copyright © 2014 John Wiley & Sons, Ltd.