Mapping vertical profile of discontinuous permafrost with ground penetrating radar at Nalaikh depression,Mongolia

Ground-penetrating radar (GPR) has become an important geophysical tool which can provide a wealth of interpretive information about the vertical profile of discontinuous permafrost. A GPR investigation was conducted in October 2006 at the Nalaikh site at the southern boundary of the Siberian discontinuous permafrost region in Mongolia. GPR data were collected along four 100-m-long profiles to identify the location of the permafrost body, which included an in situ drilling borehole and analysis of temperature observations and soil water content measurements from boreholes. The GPR interpretation results indicated that the thickness of discontinuous permafrost at the study site was only 1.9–3.0 m and the permafrost is vulnerable to climate change. The soil temperature and soil water content data demonstrate the precision of GPR image interpretation. This case demonstrated that GPR is well suited for mapping the internal structure of discontinuous permafrost with relatively low soil water content.     

Gold deposits associated with the gabbroic rocks at Tirek area,western Hoggar,Algeria: fluid inclusion study

The Tirek gold deposit hosted in the Archean shield is one of the richest sources of mined gold for Algeria. The deposit is controlled by the East Ouzzal shear zone (EOSZ), a transcurrent N–S lithospheric fault. The EOSZ is a late Pan-African dextral-ductile shear zone separating two contrasting Precambrian domains: the Archean In Ouzzal block to the west (Orthogenesis with subordinate metasediments reworked and granulitized during the ca. 2 Ga Eburnean event) and a middle Proterozoic block to the east involved in the ca. 600 Ma Pan-African event. The auriferous quartz veins are mainly oriented in two directions, N–S veins hosted in mylonitic rocks and NE–SW veins hosted in gabbroic or gneissic bands. The NE–SW veins contain the richest ore. Gold ore is found in a system of veins and lenticular quartz veinlets arranged in anastomosing networks. The hydrothermal alteration associated with these veins is characteristically a carbonate-sericite-albite-pyrite assemblage. Gold is the main metal of economic importance; it is disseminated in the quartz as grains or fibers along microcracks and as microscopic grains in the host rocks. Microthermometric results and Raman laser data from fluid inclusions demonstrate that the ore-forming fluids contained H₂O-CO₂±CH₄ and were low salinity. Homogenization temperatures are commonly 250–310 °C. In the Tirek deposit, the role of the shear zone that hosts the mineralization was to drain the hydrothermal fluid. Interactions between the fluid and the mafic host rocks and CO₂ also contributed to the formation of the hydrothermal gold deposit at Tirek.     

High-sensitive measurement of uranium LIII-edge X-ray absorption near-edge structure (XANES) for the determination of the oxidation states of uranium in crustal materials

The uranium L_III-edge XANES spectra for natural rocks at the concentration range of 0.96–124 mg kg⁻¹ were measured using a log spiral bent crystal Laue analyzer (BCLA) combined with a multi-element Ge detector. It was found that the quality of the XANES spectra using the BCLA was greatly improved due to a reduction of interfering fluorescence from major components such as Rb and Sr. The ratio of signal to background intensities in the U L_III-edge XANES spectra increased by a factor of 2.9–17 with the use of the BCLA, which greatly enhanced the detection limit for the speciation of the oxidation states of U or the U(IV)/U(VI) ratio of natural samples. In addition, it was demonstrated that the fluorescence XANES method coupled with the BCLA enable determination of the speciation of U for various natural samples such as acidic igneous rocks, ferromanganese nodules, sediments, and some sedimentary rocks such as shale and limestone.     

Implication of Apatite and Anhydrite for Formation of an Iron‐Oxide‐Apatite (IOA) Rare Earth Element Prospect,Benjamin River,Canada

The Benjamin River apatite prospect in northern New Brunswick, Canada, is hosted by the Late Silurian Dickie Brook plutonic complex, which is made up of intrusive units represented by monzogranite, diorite and gabbro. The IOA ores, composed mainly of apatite, augite, and magnetite at Benjamin River form pegmatitic pods and lenses in the host igneous rocks, the largest of which is 100 m long and 10–20 m wide in the diorite and gabbro units. In this study, 28 IOA ore and rock samples were collected from the diorite and gabbro units. Mineralogical observations show that the apatite–augite–magnetite ores are variable in the amounts of apatite, augite, and magnetite and are associated with minor amounts of epidote‐group minerals (allanite, REE‐rich epidote and epidte) and trace amounts of albite, titanite, ilmenite, titanomagnetite, pyrite, chlorite, calcite, and quartz. Apatite and augite grains contain small anhydrite inclusions. This suggests that the magma that crystallized apatite and augite had high oxygen fugacity. In back scattered electron (BSE) images, apatite grains in the ores have two zones of different appearance: (i) primary REE‐rich zone; and (ii) porous REE‐poor zone. The porous REE‐poor zones mainly appear in rims and/or inside of the apatite grains, in addition to the presence of apatite grains which totally consist of a porous REE‐poor apatite. This porous REE‐poor apatite is characterized by low REE (<0.84 wt%), Si (<0.28 wt%), and Cl (<0.17 wt%) contents. Epidote‐group minerals mainly occur in grain boundary between the porous REE‐poor apatite and augite. These indicate that REE leached from primary REE‐rich apatite crystallized as allanite and REE‐rich epidote. Magnetite in the ores often occurs as veinlets that cut apatite grains or as anhedral grains that replace a part of augite. These textures suggest that magnetite crystallized in the late stage. Pyrite veins occur in the ores, including a large amount of quartz and calcite veins. Pyrite veins mainly occur with quartz veins in augite. These textures indicate pyrite veins are the latest phase. Apatite–augite–magnetite ore, gabbro–quartz diorite and feldspar dike collected from the Benjamin River prospect contain dirty pure albite (Ab₉₈Or₂–Ab₁₀₀) under the microscope. The feldspar dikes mainly consist of dirty pure albite. Occurrences of the dirty pure albite suggest remarkable albitization (sodic alteration) of original plagioclase (An_25.3–An₆₀ in Pilote et al., 2012) associating with intrusion of monzogranite into gabbro and diorite. SO₄^2? bearing magma crystallized primary REE‐rich apatite, augite and anhydrite reacted with Fe in the sodic fluids, which result in oxidation of Fe²⁺ and release of S^2? into the sodic fluids. REE, Ca and Fe from primary REE‐rich apatite, augite and plagioclase altered by the sodic fluids were released into the fluids. Then Fe³⁺ in the sodic fluids precipitated as Fe oxides and epidote‐group minerals in apatite–augite–magnetite ores. Finally, residual S^2? in sodic fluids crystallized as latest pyrite veins. In conclusion, mineralization in Benjamin River IOA prospect are divided into four stages: (1) oxidized magmatic stage that crystallized apatite, augite and anhydrite; (2) sodic metasomatic stage accompanying alteration of magmatic minerals; (3) oxidized fluid stage (magnetite–epidote group minerals mineralization); and (4) reduced fluid stage (pyrite mineralization).     

Hydrothermal Alteration Related to Silver Mineralization at the Iwami Silver Deposit,Shimane Prefecture,Japan

The Iwami epithermal silver deposit consists of Ag-Cu veins in a dacitic intrusive body at the deep portion of the Eikyu area, and veinlets with disseminated Ag mineralization in dacitic tuff breccia at a shallow portion of the Fukuishi area. Hydrothermal alteration associated with the silver mineralization is characterized by intense potassium metasomatism with oxidizing conditions. An illite zone occurs around the pathways of uprising fluids in both the Eikyu and Fukuishi areas. It grades laterally into the illite/smectite zone, which is surrounded by a broad smectite zone. Because of boiling, abundant adularia associated with silver mineralization overlaps on the altered tuff breccia in the Fukuishi area. The alteration zoning suggests that the western Eikyu area and the eastern Fukuishi area belong to a single hydrothermal system. The data of fluid inclusion microthermometry indicate that the temperatures range 220–270°C, and salinities range 5–7 wt percent NaCl equivalent for the silver mineralization at the upper portion in the Eikyu area and the lower portion in the Fukuishi area. Radiometric ages for volcanic rocks in the area range from 2.19 to 1.64 Ma, and the dacitic intrusion formed at approximately 1.6 Ma. The silver-dominant mineralizing hydrothermal fluids system was active around 1.44 to 1.07 Ma, which formed the Eikyu Ag-Cu veins at depth, and the Fukuishi Ag ores at the shallower portion.     

Correlation between electron paramagnetic resonance and thermoluminescence in natural sodalite

Samples of natural sodalite, Na₈Al₆Si₆O₂₄Cl₂, submitted to gamma irradiation and to thermal treatments, have been investigated using the thermoluminescence (TL) and electron paramagnetic resonance (EPR) techniques. Both, natural and heat-treated samples at 500°C in air for 30 min, present an EPR signal around g = 2.01132 attributed to oxygen hole centers. The EPR spectra of irradiated samples show an intense line at g = 2.0008 superimposed by a hyperfine multiplet of 11 lines due to an O⁻ ion in an intermediate position with respect to two adjacent Al nuclei. In the TL measurements, the samples were annealed at 500°C for 30 min and then irradiated with γ doses varying from 0.001 to 20 kGy. All the samples have shown TL peaks at 110, 230, 270, 365, and 445°C. A correlation between the EPR g = 2.01132 line and the 365°C TL peak was observed. A TL model is proposed in which a Na⁺ ion acts as a charge compensator when an Al³⁺ ion replaces a Si⁴⁺ lattice ion. The γ ray destruction of the Al–Na complex provides an electron trapped at the Na and a hole trapped at a non-bridging oxygen ion adjacent to the Al³⁺ ion.     

Curvature derived from LiDAR digital elevation models as simple indicators of debris-flow susceptibility

To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.     

Nitrogen, Oxygen and Argon Dissolved in the Northern North Pacific in Early Summer

Major gases dissolved in seawater were accurately determined with a shipboard gas chromatographic method. The standard deviations were 0.28, 0.34 and 0.36% for N₂, O₂ and Ar, respectively. The method was applied to water from the northwestern North Pacific Ocean collected in May to June 2000. We got 127 duplicate seawater samples from the surface 200 m layer at 11 stations. The O₂ concentrations obtained by this method agreed with those given by the Winkler method. All the seawater samples from the surface 200 m, especially those from the upper 30 m, were supersaturated with respect to atmospheric N₂ and Ar concentrations. In the topmost 30 m layer, the degrees of supersaturation in the inventory were 2.7–4.3% for N₂ (ΔN₂) and 1.7–2.6% for Ar (ΔAr), and their ratios, ΔN₂/ΔAr, ranged from 1.53 to 1.81. This supersaturation seems to be chiefly due to air bubbles injected into the water and dissolved due to the water pressure, because the N₂/Ar ratio of the air is around 2. The amounts of air bubbles dissolved in the upper 30 m water were relatively large, with mean value of 0.41 ml/kg or 18.4 μmol/kg. The ΔN₂, ΔAr and ΔN₂/ΔAr values were all positively well correlated with the wind velocities averaged for the last 24 hours prior to sampling, allowing the conclusion to be drawn that the weaker the wind velocity, the dissolved gas composition approaches in equilibrium with the air; while the stronger the wind velocity, it approaches in the air composition. This revised version was published online in July 2006 with corrections to the Cover Date.