Sensitivity of Salt-leached Clay Sediments in the Ariake Bay Area,Japan

This study aims to determine whether the principle that “divalent cation predominance in the pore water precludes quick clay development” applies to the Ariake Bay sediments. The chemical and geotechnical properties of an Ariake clay sediment are presented, and sensitivity is discussed with a focus on pore-water salinity and cation composition. In recent years, reduction of pore-water salinity has occurred due to permeation of river water through the sediments because of overpumping of groundwater. Sodium remains the dominant pore-water cation in an upper zone, whereas divalent cations are dominant in the deeper zone. Divalent cation domination in the deeper zone is ascribed to Ca release from nearby cement-stabilized sediments and to Mg increase in response to a change in river water quality. The upper zone's sensitivity ranged from 15 to 77, and the remolded strength was mostly <0.5 kPa, such that quick clay was present over much of its depth. In contrast, the deeper zone's sensitivity was <40, and its remolded strength exceeded 0.5 kPa; quick clay was not present despite the <2 g/L salinity. The absence of quick clay is ascribed to the high remolded strength caused by the pore-water divalent to monovalent cation ratio being greater than 0.25.     

Hydrodynamic characteristics of the Tam Pokhari glacial lake outburst flood in the Mt. Everest region,Nepal

The Tam Pokhari glacial lake outburst flood (GLOF), which occurred in 1998 in the Mt. Everest region of Nepal, was evaluated using hydrodynamic models to gain a better understanding of the flow behaviour. The flood wave was analysed separately under rigid and erodible boundary conditions. In both cases, the calculated dam‐breach hydrograph, which had a peak discharge of about 10 000 m³/s, was routed through the Inkhu River, which originates from the lake. The morphologic changes along the river were also analysed and the results were compared with satellite images, field observations and recorded data. In the case of rigid boundaries, the routing procedure gradually attenuated the peaks of the hydrographs to account for hydraulic pooling in narrow gorges and storage in the channel. In the case of erodible boundaries, such effects were minimized due to the increment in channel capacity associated with erosion by debris flow. The study revealed that the GLOF event produced a large‐scale debris flow. Additionally, the results revealed that erosion and deposition took place intermittently, but that approximately 440 000 m³ of sediment was deposited about 14 km downstream from the lake mouth. The calculated peak of the water and sediment mixture at 14·4 km was found to be 30 000 m³/s, which is almost 6 times as large as that observed when the rigid boundary conditions were used. Further, the increase in the peaks of the hydrographs due to sediment transport was the primary reason for the destruction associated with the GLOF. These findings suggest that the local sedimentology and topography, as well as other geo‐hazard conditions in the area, should be carefully evaluated before recommending any control measures against GLOFs in the Himalayan region. Copyright © 2009 John Wiley & Sons, Ltd.     

An Application of Hydraulic Tomography to a Large‐Scale Fractured Granite Site,Mizunami, Japan

While hydraulic tomography (HT) is a mature aquifer characterization technology, its applications to characterize hydrogeology of kilometer‐scale fault and fracture zones are rare. This paper sequentially analyzes datasets from two new pumping tests as well as those from two previous pumping tests analyzed by Illman et al. (2009) at a fractured granite site in Mizunami, Japan. Results of this analysis show that datasets from two previous pumping tests at one side of a fault zone as used in the previous study led to inaccurate mapping of fracture and fault zones. Inclusion of the datasets from the two new pumping tests (one of which was conducted on the other side of the fault) yields locations of the fault zone consistent with those based on geological mapping. The new datasets also produce a detailed image of the irregular fault zone, which is not available from geological investigation alone and the previous study. As a result, we conclude that if prior knowledge about geological structures at a field site is considered during the design of HT surveys, valuable non‐redundant datasets about the fracture and fault zones can be collected. Only with these non‐redundant data sets, can HT then be a viable and robust tool for delineating fracture and fault distributions over kilometer scales, even when only a limited number of boreholes are available. In essence, this paper proves that HT is a new tool for geologists, geophysicists, and engineers for mapping large‐scale fracture and fault zone distributions.     

Tsunami hazard evaluation for Kuwait and Arabian Gulf due to Makran Subduction Zone and Subaerial landslides

Given the recent historical disastrous tsunamis and the knowledge that the Arabian Gulf (AG) is tectonically active, this study aimed to evaluate tsunami hazards in Kuwait from both submarine earthquakes and subaerial landslides. Despite the low or unknown tsunami risks that impose potential threats to the coastal area’s infrastructures and population of Kuwait, such an investigation is important to sustain the economy and safety of life. This study focused on tsunamis generated by submarine earthquakes with earthquake magnitudes (M _w ) of 8.3–9.0 along the Makran Subduction Zone (MSZ) and subaerial landslides with volumes of 0.75–2.0 km³ from six sources along the Iranian coast inside the AG and one source at the Gulf entrance in Oman. The level of tsunami hazards associated with these tsunamigenic sources was evaluated using numerical modeling. Tsunami model was applied to conduct a numerical tsunami simulation and predict tsunami propagation. For landslide sources, a two-layer model was proposed to solve nonlinear longwave equations within two interfacing layers with appropriate kinematic and dynamic boundary conditions. Threat level maps along the coasts of the AG and Kuwait were developed to illustrate the impacts of potential tsunamis triggered by submarine earthquakes of different scales and subaerial landslides at different sources. GEBCO 30 arc-second grid data and others were used as bathymetry and topography data for numerical modeling. Earthquakes of M _w 8.3 and M _w 8.6 along the MSZ had low and considerable impacts, respectively, at the Gulf entrance, but negligible impacts on Kuwait. An earthquake of M _w 9.0 had a remarkable impact for the entire Gulf region and generated a maximum tsunami amplitude of up to 0.5 m along the Kuwaiti coastline 12 h after the earthquake. In the case of landslides inside the AG, the majority impact occurred locally near the sources. The landslide source opposite to Kuwait Bay generated the maximum tsunami amplitudes reaching 0.3 m inside Kuwait Bay and 1.8 m along the southern coasts of Kuwait.

     

http://dx.doi.org/10.1016/j.gsf.2016.06.013

The Archean continental crusts account for ca.20% of the present volume,but the thermal history of the Earths' mantle suggests much more continental crusts were formed in the early Archean.Because the Archean continental crust underwent severe metamorphism,it is important to avoid influence by the later thermal events.We carried out a comprehensive geochronological work of Cathodoluminescence(CL) observation and U-Pb dating of zircons from orthogneisses and supracrustal rocks over the Saglek Block to obtain their protolith ages.The zircons were classified into three domains of core,mantle and rims,and the cores were further classified into three groups of inherited,altered and zoned cores based on the zonation on the CL images.We estimated the protolith ages from Pb-Pb ages of the zoned-cores of zircons with low U contents.We made a detailed sketch of a small outcrop in St.John's Harbour South(SJHS) area,and classified the orthogneisses and mafic enclaves into seven generations based on the geologic occurrence.The first and second generations comprise mafic rocks and lack magmatic zircons.We conducted CL imaging and U-Pb dating of zircons from the third,sixth and seventh generation of the orthogneisses to estimate the protolith ages at 3902 L 25,3892 ± 33 and 3897 ± 33 Ma for each,supporting the presence of the over 3.9 Ca Iqaluk Gneiss.The geological occurrence that the mafic rocks occur as enclaves within the 3.9 Ga Iqaluk Gneiss indicates that they are the oldest supracrustal rocks in the world.Our geochronological and geological studies show the Uivak Gneiss is quite varied in lithology and age from 3.6 to 3.9 Ga,and tentatively classified into six groups based on their ages.The oldest Uivak Gneiss components including the Iqaluk Gneiss are present around the SJHS area,and the orthogneisses become young as it is away.The lines of evidence of overprinting of younger granitoid on older granitoid in small outcrops and geological-map scale as well as presence of inherited zircons even in the oldest suite suggests that crustal reworking played an important role on erasing the ancient crusts.     

A computerized geologic mapping system based on logical models of geologic structures

In this article we describe the basic framework of the computerized geologic mapping system cigma. The system, whic is based on a mathematical formulation of geologic concepts, consists of the following six subsystems: (1) input of geologic data set; (2) inference of stratigraphic sequence; (3) construction of logical models of geologic structures; (4) determination of three-dimensional geologic boundary surfaces; (5) construction of three-dimensional solid model of geologic structures; and (6) graphical presentation. Geologic structures are summarized in several tables called logical models of geologic structures. Each model is constructed automatically from input data on structural relations between geologic bodies. The model interprets the data automatically to create data files necessary to determine the shapes of geologic boundaries; it also provides a threedimensional solid model of geologic structures referring to the shapes of boundaries. As a prototype, we introduce two types of contacts corresponding to conformity and unconformity into the logical model and show that it is possible to draw a geologic map automatically. More complex geologic structures can be introduced into the geologic mapping system through further formulation of geologic structures.     

Effects of raised CO2 concentration on the egg production rate and early development of two marine copepods (Acartia steueri and Acartia erythraea)

Direct injection of CO(2) into the deep ocean is receiving increasing attention as a way to mitigate increasing atmospheric CO(2) concentration. To assess the potential impact of the environmental change associated with CO(2) sequestration in the ocean, we studied the lethal and sub-lethal effects of raised CO(2) concentration in seawater on adult and early stage embryos of marine planktonic copepods. We found that the reproduction rate and larval development of copepods are very sensitive to increased CO(2) concentration. The hatching rate tended to decrease, and nauplius mortality rate to increase, with increased CO(2) concentration. These results suggest that the marine copepod community will be negatively affected by the disposal of CO(2). This could decrease on the carbon export flux to the deep ocean and change the biological pump. Clearly, further studies are needed to determine whether ocean CO(2) injection is an acceptable strategy to reduce anthropogenic CO(2).     

Ecological aspects of hydrothermal vent animals in captivity at atmospheric pressure

Hydrothermal vent animals were kept and displayed at atmospheric pressure with an artificial hydrothermal vent system in Enoshima Aquarium, Fujisawa, Kanagawa, Japan. The artificial hydrothermal vent system was composed of a main rearing tank, a heating tank, a hot water outlet with added Na₂S as the source of H₂S, and added CO₂ for chemosynthetic bacteria and pH regulation. When the need arises, a dissolved oxygen control unit and submersible heaters can be attached. We are now rearing hydrothermal vent crabs (Austinograea yunohana), hydrothermal vent galatheid crabs (Shinkaia crosnieri), vestimentiferan tubeworms (Lamellibrachia satsuma), hydrothermal vent shrimp (Opaepele spp.), hydrothermal vent barnacles (Ashinkailepas seepiophilia and Neoverruca sp.), and tonguefish (Symphurus sp.). In the artificial hydrothermal vent tank, shrimp and crabs have been observed to cluster close to the artificial hydrothermal vent. In particular, large (adult) crabs needed a heat source to live in the aquarium over a long term. Additionally, some species (A. yunohana, S. crosnieri, Opaepele sp. and Symphurus sp.) have spawned and hatched in captivity. It is likely higher water temperatures are needed for egg and larval development compared with temperatures for adult requirements.     

Sub-Lethal Effects of Elevated Concentration of CO<Subscript>2</Subscript> on Planktonic Copepods and Sea Urchins

Data concerning the effects of high CO₂ concentrations on marine organisms are essential for both predicting future impacts of the increasing atmospheric CO₂ concentration and assessing the effects of deep-sea CO₂sequestration. Here we review our recent studies evaluating the effects of elevated CO₂ concentrations in seawater on the mortality and egg production of the marine planktonic copepod, Acartia steueri, and on the fertilization rate and larval morphology of sea urchin embryos, Hemicentrotus pulcherrimus and Echinometra mathaei. Under conditions of +10,000 ppm CO₂ in seawater (pH 6.8), the egg production rates of copepods decreased significantly. The survival rates of adult copepods were not affected when reared under increased CO₂ for 8 days, however longer exposure times could have revealed toxic effects of elevated CO₂ concentrations. The fertilization rate of sea urchin eggs of both species decreased with increasing CO₂ concentration. Furthermore, the size of pluteus larvae decreased with increasing CO₂ concentration and malformed skeletogenesis was observed in both larvae. This suggests that calcification is affected by elevated CO₂ in the seawater. From these results, we conclude that increased CO₂ concentration in seawater will chronically affect several marine organisms and we discuss the effects of increased CO₂ on the marine carbon cycle and marine ecosystem. This revised version was published online in July 2006 with corrections to the Cover Date.     

Geographical Variations in Prosome Length and Body Weight of Neocalanus Copepods in the North Pacific

Geographical variations in prosome length and body weight of Neocalanus copepods (N. cristatus, N. plumchrus and N. flemingeri) were investigated on samples from North-South and East-West transects in the North Pacific during spring to early summer in 1998 and 1999. Southward and eastward increasing patterns were pronounced for water temperature, although no significant pattern was observed for chlorophyll a concentrations. All Neocalanus species showed large geographical variations in prosome length and body weight, being smaller in the southern and eastern waters. Comparing the relationship between prosome length and body weight, large deviations (lower body weight at a given prosome length) were evident for the eastern specimens of N. cristatus and N. plumchrus. In stepwise regression analysis, the geographical variations of prosome length and body weight revealed a significantly negative correlation with temperature variations. These results suggest that temperature is a more important environmental factor than chlorophyll a concentration in its effect on geographical variations in prosome length and body weight of Neocalanus copepods in the North Pacific. This revised version was published online in July 2006 with corrections to the Cover Date.