Zircon U–Pb dating of gabbro and diorite from the Bato pluton,northeast Japan

To constrain the timing of the tectonothermal events and formation process of a plutonic suite, U–Pb dating was carried out by laser ablation inductively coupled plasma mass spectrometry combined with cathodoluminescence imaging on zircon grains extracted from the Bato pluton, northern Yamizo Mountains, Japan. The Bato pluton consists of gabbro and diorite. Zircon grains separated from a gabbro sample had a unimodal ²³⁸U–²⁰⁶Pb age (105.7 ±1.0 Ma). It was interpreted as the solidification age of the gabbro. Cathodoluminescence observation showed that the zircon grains from a diorite sample were characterized by anhedral cores, oscillatory zoned mantles, and dark rims. The ²³⁸U–²⁰⁶Pb age of the anhedral cores ranged from 2 165 Ma to 161 Ma, indicating the assimilation of surrounding sedimentary rocks. The ²³⁸U–²⁰⁶Pb ages of the oscillatory zoned mantles and dark rims are 109.0 ±1.3 Ma and 107.7 ±1.3 Ma, respectively. Observation under polarizing microscopy suggests that the anhedral cores occurred before plagioclase and hornblende, and the oscillatory zones around the anhedral cores had crystallized at the same time as the crystallization of biotite. Moreover, the dark rims formed at the same time as the crystallization of quartz and K‐feldspar. The formation process of the gabbro‐diorite complex in the Bato pluton was inferred as follows. (i) A mafic initial magma intruded into Mesozoic sedimentary rocks, and the assimilation of these sedimentary rocks led to geochemical variation yielding a dioritic composition. Subsequently, plagioclase and hornblende of the diorite were crystallized before 109.0 ±1.3 Ma. (ii) Biotite crystallized in the middle stage around 109.0 ±1.3 Ma. (iii) Quartz and K‐feldspar of the diorite were crystallized at 107.7 ±1.3 Ma. The gabbroic magma solidified (105.7 ±1.0 Ma) after solidification of the diorite.     

Mantle dynamics of Western Pacific and East Asia: Insight from seismic tomography and mineral physics

Recent results of high-resolution seismic tomography and mineral physics experiments are used to study mantle dynamics of Western Pacific and East Asia. The most important processes in subduction zones are the shallow and deep slab dehydration and the convective circulation (corner flow) processes in the mantle wedge. The combination of the two processes may have caused the back-arc spreading in the Lau basin, affected the morphology of the subducting Philippine Sea slab and its seismicity under southwest Japan, and contributed to the formation of the continental rift system and intraplate volcanism in Northeast Asia, which are clearly visible in our tomographic images. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent (a) small mantle plumes, (b) upwellings associated with the slab collapsing down to the lower mantle, or (c) sub-slab dehydration associated with deep earthquakes caused by the reactivation of large faults preserved in the slab. Combining tomographic images and earthquake hypocenters with phase diagrams in the systems of peridotite + water, we proposed a petrologic model for arc volcanism. Arc magmas are caused by the dehydration reactions of hydrated slab peridotite that supply water-rich fluids to the mantle wedge and cause partial melting of the convecting mantle wedge. A large amount of fluids can be released from hydrated MORB at depths shallower than 55 km, which move upwards to hydrate the wedge corner under the fore-arc, and never drag down to the deeper mantle along the slab surface. Slab dehydration reactions at 120 km depth are the antigorite-related 5 reactions which supply water-rich fluids for forming the volcanic front. Phase A and Mg-surssasite breakdown reactions at 200 and 300 km depths below 700 °C cause the second and third arcs, respectively. Moreover, the dehydration reactions of super-hydrous phase B, phases D and E at 500–660 km depths cause the fluid transportation to the mantle boundary layer (MBL) (410–660 km depth). The stagnant slabs extend from Japan to Beijing, China for over 1000 km long, indicating that the arc–trench system covers the entire region from the Japan trench to East Asia. We propose a big mantle wedge (BMW) model herein, where hydrous plumes originating from 410 km depth cause a series of intra-continental hot regions. Fluids derived from MBL accumulated by the double-sided subduction zones, rather than the India–Asia collision and the subsequent indentation into Asia, are the major cause for the active tectonics and mantle dynamics in this broad region.     

Water transportation from the subducting slab into the mantle transition zone

Using a recently developed petrogenetic grid for MORB + H₂O, we propose a new model for the transportation of water from the subducting slab into the mantle transition zone. Depending on the geothermal gradient, two contrasting water-transportation mechanisms operate at depth in a subduction zone. If the geothermal gradient is low, lawsonite carries H₂O into mantle depths of 300 km; with further subduction down to the mantle transition depth (approximately 400 km) lawsonite is no longer stable and thereafter H₂O is once migrated upward to the mantle wedge then again carried down to the transition zone due to the induced convection. At this depth, hydrous β-phase olivine is stable and plays a role as a huge water reservoir. In contrast, if the geothermal gradient is high, the subducted slab may melt at 700–900 °C at depths shallower than 80 km to form felsic melt, into which water is dissolved. In this case, H₂O cannot be transported into the mantle below 80 km. Between these two end-member mechanisms, two intermediate types are present. In the high-pressure intermediate type, the hydrous phase A plays an important role to carry water into the mantle transition zone. Water liberated by the lawsonite-consuming continuous reaction moves upward to form hydrous phase A in the hanging wall, which transports water into deeper mantle. This is due to a unique character of the reaction, because Phase A can become stable through the hydration reaction of olivine. In the case of low-pressure intermediate type, the presence of a dry mantle wedge below 100 km acts as a barrier to prevent H₂O from entering into deeper mantle.     

Fossil Association from the Lower Cambrian Yanjiahe Formation in the Yangtze Gorges Area, Hubei, South China

Apart from previously reported Small Shelly Fossils (SSFs), a macroscopic fossil assemblage, comprising abundant algae, cone-shaped tubular fossil forms, and probable impressions of a megascopic metazoan, comes from the Lower Cambrian Yanjiahe Formation in the Yangtze Gorges area of western Hubei Province, south China. The visible fossils are preserved in thin-laminated siltstone or muddy siltstone intercalated between 8–15 mm-thick carbonate deposits, probably representing sedimentary settings of a constrained local depression in the shallow water carbonate platform during the Early Cambrian Meishucunian Stage. The macroscopic fossil association provides significant fossil evidence about the evolution of life from the late Precambrian to the ‘Cambrian explosion’ interval.     

Determination of the Drag Coefficient over the Tibetan Plateau

In this paper,a preliminary study is given on the drag (i.e.bulk transfer for momentum) coefficient,on the basis of data from four sets of AWS in Tibet during the first observational year from July 1993 to July 1994 according to China Japan Asian Monsoon Cooperative Research Program.The results show that the drag coefficient over the Tibetan Plateau is 3.3 to 4.4×103.In addition,monthly and diurnal variations of drag coefficient and the relationship among the drag coefficients and the bulk Richardson number,surface roughness length and wind speed at 10 m height are discussed in detail.     

Ultrahigh-pressure metamorphic records hidden in zircons from amphibolites in Sulu Terrane, eastern China

Abstract The amphibolites occur sporadically as thin layers and blocks throughout the Sulu Terrane, eastern China. All analyzed amphibolite from outcrop and drill cores from prepilot drill hole CCSD‐PP1 and CCSD‐PP2, Chinese Continental Scientific Drilling Project in the Sulu Terrane, are retrograded eclogites overprinted by amphibolite‐facies retrograde metamorphism, with characteristic mineral assemblages of amphibole + plagioclase + epidote ± quartz ± biotite ± ilmenite ± titanite. However, coesite and coesite‐bearing ultrahigh‐pressure (UHP) mineral assemblages are identified by Raman spectroscopy and electron microprobe analysis as inclusions in zircons separated from these amphibolites. In general, coesite and other UHP mineral inclusions are preserved in the cores and mantles of zircons, whereas quartz inclusions occur in the rims of the same zircons. The UHP mineral assemblages consist mainly of coesite + garnet + omphacite + rutile, coesite + garnet + omphacite, coesite + garnet + omphacite + phengite + rutile + apatite, coesite + omphacite + rutile and coesite + magnesite. Compositions of analyzed mineral inclusions are very similar to those of matrix minerals from Sulu eclogites. These UHP mineral inclusion assemblages yield temperatures of 631–780°C and pressures of ≥2.8 × 10³ MPa, representing the P–T conditions of peak metamorphism of these rocks, which are consistent with those (T = 642–726°C; P ≥ 2.8 × 10³ MPa) deduced from adjacent eclogites. These data indicate that the amphibolites are the retrogressive products of UHP eclogites.     

Lost primordial continents

We investigate the bulk density variations of some representative compositions for the lower mantle based on the pressure–volume–temperature equation of state of the constituent mineral phases. The density variations of pyrolite, harzburgite, mid-ocean ridge basalt (MORB), tonalite–trondhjemite–granodiorite (TTG), and anorthosite are studied at a temperature of 300 K and at lower mantle pressures. The density of MORB is greater than that of pyrolite throughout the lower mantle, while the density of harzburgite is slightly lower than that of pyrolite. The density of anorthosite is comparable to that of pyrolite in the lower mantle in general, and greater in the lowermost mantle, while the density of TTG is lower than pyrolite throughout the lower mantle. The above results have important implications for the fate of primordial continents, TTG and anorthosite crust. While subducted TTG might be stagnant in the mantle transition zone, dense subducted anorthositic crust could be expected to sink to the core–mantle boundary (CMB) and thus might be a major component of the D" layer immediately above the CMB. Thus, we propose that significant bodies of continental material could be present in the mantle in the transition zone and immediately above the CMB, in addition to the continents on the Earth's surface.     

Nine requirements for the origin of Earth's life:Not at the hydrothermal vent,but in a nuclear geyser system

The origin of life on Earth remains enigmatic with diverse models and debates.Here we discuss essential requirements for the first emergence of life on our planet and propose the following nine requirements:(1)an energy source(ionizing radiation and thermal energy);(2)a supply of nutrients(P.K.REE.etc.);(3)a supply of life-constituting major elements;(4)a high concentration of reduced gases such as CH_4,HCN and NH_3;(5)dry-wet cycles to create membranes and polymerize RNA;(6)a non-toxic aqueous environment;(7)Na-poor water;(8)highly diversified environments,and(9)cyclic conditions,such as dayto-night,hot-to-cold etc.Based on these nine requirements,we evaluate previously proposed locations for the origin of Earth's life,including:(1)Darwin's "warm little pond",leading to a "prebiotic soup" for life;(2)panspermia or Neo-panspermia(succession model of panspermia);(3)transportation from/through Mars;(4)a deepsea hydrothermal system;(5)an on-land subduct ion-zone hot spring,and(6)a geyser systems driven by a natural nuclear reactor.We conclude that location(6)is the most ideal candidate for the o rigin point for Earth's life because of its efficiency in continuously supplying both the energy and the necessary materials for life,thereby maintaining the essential "cradle" for its initial development.We also emphasize that falsifiable working hypothesis provides an important tool to evaluate one of the biggest mysteries of the universe-the origin of life.     

Kurosegawa zone and its bearing on the development of the Japanese Islands

The Kurosegawa zone in southwest Japan is a 600 km long serpentinite mélange in the Chichibu terrains. It runs generally E-W but is slightly oblique to the subparallel arrangement of the Ryoke, Sanbagawa and Chichibu belts of Southwest Japan. A variety of geological units occurs in the Kurosegawa zone:

1. (1) granodiorite, gneiss and amphibolite of ca. 400 Ma,

2. (2) Siluro-Devonian formations,

3. (3) Upper Carboniferous to Jurassic formations,

4. (4) Upper Jurassic to Lower Cretaceous formations,

5. (5) serpentinite and

6. (6) low- to medium-grade metamorphic rocks of various baric types (ages, 220, 320, 360 and 420 Ma by K-Ar).

The most widespread is a high-pressure intermediate group of metamorphic rocks. Serpentinite is emplaced along the faults between and within the constituent units.Rocks of the Kurosegawa zone represent a mature orogenic belt along a continental margin or an island arc. Its original site as constrained by paleomagnetism was near the equatorial area. Here, 400 Ma old paired metamorphism and related magmatism took place. The island arc or microcontinent migrated northward to collide with the Eurasia plate during Late Jurassic, thus consuming the intervening ocean.     

Numerical modeling of thermal structure, circulation of H2O, and magmatism–metamorphism in subduction zones: Implications for evolution of arcs

Numerical models on thermal structure, convective flow of solid, generation and transportation of H₂O-rich fluid in subduction zones are consolidated to have a comprehensive view of the subduction zone processes: heat balance, circulation of H₂O magmatism–metamorphism, growth of arcs and continental margins. A large scale convection model with steady subduction of a cold old slab (130 Myr old) predicts rapid ( 100 Myr) cooling of subduction zones, resulting in cessation of magmatism. The model also predicts that the mantle temperature beneath arcs and continental margins is greatly affected by the effective temperature of the subducting slab, i.e., the age of the subducting slab. If subduction of a young hot slab, including ridge subduction, occurs every 60 to 120 Myr as is suggested for eastern Asia, the average temperature beneath arcs is increased by about 300 °C, which may explain the long-lasting magmatism in eastern Asia. Associated with subduction of young slabs and ridges, thermal structure and circulation of H₂O are greatly modified to cause a transition from (1) normal arc magmatism, (2) forearc mantle melting, to (3) slab melting to produce a significant amount (100 km³) of granitic melts, associated with both high-P/T and low-P/T type metamorphism. The last stage of (3) can result in formation of a granitic batholith belt and a paired metamorphic belts. Synthesis of the numerical models and observations suggest that episodic subduction of young slabs and ridges can explain heat source for generating a large amount of granitic magmas of batholiths, synchronous formation of batholith and regional metamorphic belts, and P–T conditions of the paired metamorphism. Even the high-P/T metamorphism requires an elevated geothermal structure in the forearc region, associated with ridge subduction. Although the emplacement of the batholiths and the regional metamorphic belts, and the mass balance in subduction zones are not well constrained at present, the episodic event associated with ridge subduction is thought to be essential for net growth of arcs and continental margins, as well as for the long-term heat balance in subduction zones.