TOWARD ESTABLISHING THE CONCEPT OF PHYSICAL URBAN AREA IN CHINA

I.IntroduchollWiulegeOgraphystudiestheterritoria1systemsabouttherelationsbforeenhumanbeingSandthenature[I4],urbanmpaphyfocusesspecificallyonthespatialoopltizationandprocessofurbanterritory,anditsinteraCtionwiti1Otherterritorialsystems.Usually,wedoresearch…     

毫秒时间尺度太阳微波辐射新特征

自1990年6月北京天文台太阳射电偏振仪投入实测以来,观测到一百多个“Spike”和短时标精细结构微波幅射,其中包括一些新的微波幅射特征。本文给出了主要的四点特征:(1)窄带辐射;(2)快速偏振逆转;(3)快速频率漂移;(4)不同时标的准周期振荡。     

成都城市发展对热岛强度影响的主成份回归分析

本文对成都市总人口、建成区面积等11个因子、作了主成份回归L-S估计和M-估计,讨论了成都城市发展对“热岛”强度的主要影响因子。结果表明,城区房屋建筑面积及总人口数是影响城市气候(气温)的主要因子,其次为城市人口总户数、建成面积等。 文中,对回归方程进行了拟合计算,回归效果比较满意(尤其是稳健回归)。     

察尔汗盐湖低品位卤水自然蒸发试验研究

察尔汗盐湖是一个以卤水钾镁盐矿为主的大型综合性盐类矿床,盐湖东部潜卤水水化学类型为氯化物型,从KCl等组份含量来看,属低钾高钠低镁的卤水。对该类型卤水进行自然蒸发试验,确定盐类结晶析出顺序和光卤石矿物的最佳分离点,取得光卤石矿的产率和光卤石中KCl含量等基础数据,以对该卤水工业利用性能作出评价。     

河南省城区经济发展研究

文章首先介绍了城区经济的概念、特征和类型，在分析河南省城区经济发展状况的基础上，论述了该省城区经济的地位和作用，提出了河南省城区经济发展构想以及对策措施。     

三工河流域新老绿洲发育度的比较

绿洲是干旱区最重要的景观单元之一。人工绿洲是在干旱条件下经长期人类活动改造而形成的特殊景观。随着人类对绿洲水土资源开发利用程度的不断加强,绿洲呈现出不同的发展阶段。从天然绿洲到人工绿洲,是人类适应和改造干旱区自然环境的历程。在这一人地相互作用的过程中,绿洲显示出明显的发育演化特征。从多学科综合的角度,提出绿洲发育度的概念,并从灌溉体系的建设状况、水资源的利用水平、植被与生态建设、农业发展程度、社会经济水平和绿洲景观结构等7个方面提出了绿洲发育度的评价指标体系,以天山北坡2个人工绿洲为例,从空间上定量比较2个绿洲的发育程度,其中阜康市绿洲发育度高于222团绿洲(阜北农场)。     

An experimental study of anorthosite dissolution in lunar picritic magmas: Implications for crustal assimilation processes

Experiments characterizing the kinetics of anorthosite dissolution in lunar picritic magmas (very low-Ti, low-Ti, and high-Ti picritic glasses) were conducted at 0.6 GPa and 1250-1400 °C using the dissolution couple method. Reaction between the anorthosite and lunar picritic magmas at 1250-1300 °C produced a spinel + melt layer. Reaction between the anorthosite and an olivine-saturated low-Ti magma at 1250-1300 °C produced a crystal-free region between the spinel + melt layer and the olivine-saturated magma. The anorthosite dissolution experiments conducted at 1400 °C simply dissolved anorthosite and did not result in a crystal-bearing region. The rate of anorthosite dissolution strongly depends on temperature and composition of the reacting melt. Concentration profiles that develop during anorthosite dissolution are nonlinear and extend from the picritic glass compositions to anorthite. These profiles feature a large and continuous variation in melt density and viscosity from the anorthosite-melt interface to the initial picritic magmas. In both the low-Ti and high-Ti magmas the diffusive fluxes of TiO₂, Al₂O₃, and SiO₂ are strongly coupled to the concentration gradients of CaO and FeO. Anorthosite dissolution may play an important role in producing the chemical variability of the lunar picritic magmas, the origin of spinel in the lunar basalts and picritic glasses, and the petrogenesis of the high-Al basalts.     

Effect of some additives on synthesis of zeolite from coal fly ash

Hydrothermal conversion of fly ash into zeolites was conducted and the effects of the addition of sodium halide and waste solutions produced after zeolitization of fly ash, as well as the adjustment of the Si/Al ratio prior to synthesis process on the formation and cation exchange capacity (CEC) of zeolite product were evaluated. Both the addition of NaCl and NaF ameliorated the crystallinity and CEC of synthesized zeolite, but NaF had a better improvement effect. Na⁺ was considered to enhance the crystallization of zeolite, while F⁻ favored the dissolution of fly ash. The type of zeolite formed depended on the Si/Al ratio of the starting material prior to the nucleation and crystallization of zeolite. The adjustment of the Si/Al ratio of fly ash by addition of Na₂SiO₄ and Al(OH)₃ changed the type and CEC of zeolite. Waste solutions contained large amount of Si and little Al due to the formation of a zeolite named NaP1 in zeolite terminology with the Joint Committee of Powder Diffraction Standard (JCPDS) code of 39-0219. The alkalinity decreased largely. As a result, the CEC value of zeolite products synthesized with waste solution as alkali source decreased. The supplementation of new alkali to adjust the alkalinity of waste solution could enhance the CEC of synthesized product. It was concluded that: (1) addition of sodium halide and adjustment of the Si/Al ratio prior to synthesis can improve the quality of zeolite; (2) waste solutions produced following the zeolitization of fly ash can be reused as an alkali source in the activation of fly ash; zero-emission of waste solution in the synthesis of zeolite from fly ash is possible.     

用于砾石夹层钻进的新型PDC钻头的研制与使用

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.