华北地块东部晚中生代至新生代岩石圈不均一减薄与改造模式

本文综合运用不同时代幔源包体平衡温压对比、玄武岩地球化学性质对岩石圈厚度的反演以及不同时代岩石圈地幔地球化学性质的对比的方法，把华北地块东部岩石圈的减薄时间限定在晚中生代至新生代之间。减薄的机制可能是华北东部地区晚白垩世以来大陆岩石圈的拉张作用。由于机械性拉薄和热、机械和化学侵蚀作用，岩石圈厚度最终减薄到70km以下。但古老的岩石圈地幔并没有完全因减薄而消失，残留部分受到了来自软流圈物质的强烈改造，使其Sr、Nd同位素组成类似于软流圈，但Os同位素没有受到明显的改变。改造后的岩石圈地幔成为华北地块东部新生代岩石圈地幔的主体。在时空上，岩石圈的减薄具有不均一的性质。     

AutoCAD技术在道路工程施工测量中的应用

在道路建设中,通常分为几个标段同时施工,每个标段里一般包括路基及各种构造物,因此,施工测量任务十分繁重,由于全站仪在工程测量中的普遍应用,其极坐标放样功能使测量工作中出现错误主要为坐标计算错误,特别是具有记忆功能的全站仪,可以事先输入坐标,复核后再到现场放样。所以测量的主要工作就是根据施工图纸计算其各个部位的坐标,而如何快速、准确地计算坐标是关键所在。应用AutoCAD技术进行坐标定位计算,则可以做到事半功倍,并能取得良好的施工效果。     

Analysis on Bearing Capacity of Tunnel-Type Anchorage of a Long-Span Suspension Bridge

INTRODUCTION Tunnel typeanchoragehasobviousadvantages inbearingcapacityversusinvestment(LiuandHu,1996).However,itisrarelyusedinapracticalpro jectbecauseofitsrequirementofgoodrockcondi tions.Siduhebridge(Fig.1),whichliesintheBa dongmountainsinthewestplatea…     

岩土钻掘设备的液压步履机构

因液压步履移位最方便，辅助时间短，换向灵活，移位对孔准确，大型岩土钻掘设备施工的群孔现场实现近距离的自行迁移多采用液压步履机构。详细叙述了双向移动和单向移动加转向步履机构的结构和特点。     

中国陆地净初级生产力的季节变化研究

了解不同季节陆地净初级生产力(NPP)的变化及与气候的相互关系以及在不同地类的差异对深刻理解我国陆地生态系统对全球气候变化的响应和陆地碳循环研究具有重要意义。本文使用1981～2000年间GLO-PEM模型模拟的我国陆地NPP数据和同期气温、降水以及土地利用数据, 研究不同季节我国陆地植被NPP的变化。结果表明,在1981～2000年期间,四个季节的NPP都呈显著增加趋势,春季是NPP增加速率最快的季节,夏季是NPP增加量最大的季节。耕地在春、夏和秋季NPP增长和增长率最高,林地冬季NPP增长最多而水域冬季NPP增长率最高。夏季NPP增长最高的区域分布于我国东部的多数地区、内蒙古东部、四川盆地、贵州东部、藏南和新疆西部;夏季NPP降低最多的区域分布于在呼伦贝尔高原、鄂尔多斯高原、黄土高原、青藏高原东部和新疆西北部。     

An alternative Boussinesq equation considering the effect of hysteresis on coastal groundwater waves

This paper presents an alternative Boussinesq equation considering hysteresis effect via a third‐order derivative term. By introducing an improved moisture–pressure retention function, this equation describes, with reasonable precision, groundwater propagation in coastal aquifers subject to Dirichlet boundary condition of different oscillation frequencies. Test results confirmed that it is necessary to consider horizontal and vertical flows in unsaturated zone, because of their variable influences on hysteresis. Hysteresis in unsaturated zone can affect the water table wave number of groundwater wave motion, such as wave damping rate and phase lag. Oscillations with different periods exert different hysteresis effect on wave propagation. Truncation/shrinkage of unsaturated zones also affects the strength of hysteresis. These impacts can be reflected in the alternative Boussinesq equation by adjusting the parameter representing the variation rate of moisture associated with pressure change, as opposed to traditional computationally expensive hysteresis algorithms. The present Boussinesq equation is simple to use and can provide feasible basis for future coupling of groundwater and surface water models. Copyright © 2016 John Wiley & Sons, Ltd.     

Chemical weathering and CO2 consumption in the glaciated Karuxung River catchment,Tibetan Plateau

Climate factors play critical roles in controlling chemical weathering, while chemically weathered surface material can regulate climate change. To estimate global chemical weathering fluxes and CO₂ balance, it is important to identify the characteristics and driving factors of chemical weathering and CO₂ consumption on the Tibetan Plateau, especially in glaciated catchments. The analysis of the hydro-geochemical data indicated that silicate weathering in this area was inhibited by low temperatures, while carbonate weathering was promoted by the abundant clastic rocks with fresh surfaces produced by glacial action. Carbonate weathering dominated the riverine solute generation (with a contribution of 58%, 51%, and 43% at the QiangYong Glacier (QYG), the WengGuo Hydrological Station (WGHS), and the lake estuary (LE), respectively). The oxidation of pyrite contributed to 35%, 42%, and 30% of the riverine solutes, while silicate weathering contributed to 5%, 6%, and 26% of the riverine solutes at the QYG, WGHS, and LE, respectively. The alluvial deposit of easily weathering fine silicate minerals, the higher air temperature, plant density, and soil thickness at the downstream LE in comparison to upstream and midstream may lead to longer contact time between pore water and mineral materials, thus enhancing the silicate weathering. Because of the involvement of sulfuric acid produced by the oxidation of pyrite, carbonate weathering in the upstream and midstream did not consume atmospheric CO₂, resulting in the high rate of carbonate weathering (73.9 and 75.6 t km⁻² yr⁻¹, respectively, in maximum) and potential net release of CO₂ (with an upper constraint of 35.6 and 35.2 t km⁻² yr⁻¹, respectively) at the QYG and WGHS. The above results indicate the potential of the glaciated area of the Tibetan Plateau with pyrite deposits being a substantial natural carbon source, which deserves further investigation.     

Using raw regional climate model outputs for quantifying climate change impacts on hydrology

General circulation model outputs are rarely used directly for quantifying climate change impacts on hydrology, due to their coarse resolution and inherent bias. Bias correction methods are usually applied to correct the statistical deviations of climate model outputs from the observed data. However, the use of bias correction methods for impact studies is often disputable, due to the lack of physical basis and the bias nonstationarity of climate model outputs. With the improvement in model resolution and reliability, it is now possible to investigate the direct use of regional climate model (RCM) outputs for impact studies. This study proposes an approach to use RCM simulations directly for quantifying the hydrological impacts of climate change over North America. With this method, a hydrological model (HSAMI) is specifically calibrated using the RCM simulations at the recent past period. The change in hydrological regimes for a future period (2041–2065) over the reference (1971–1995), simulated using bias‐corrected and nonbias‐corrected simulations, is compared using mean flow, spring high flow, and summer–autumn low flow as indicators. Three RCMs driven by three different general circulation models are used to investigate the uncertainty of hydrological simulations associated with the choice of a bias‐corrected or nonbias‐corrected RCM simulation. The results indicate that the uncertainty envelope is generally watershed and indicator dependent. It is difficult to draw a firm conclusion about whether one method is better than the other. In other words, the bias correction method could bring further uncertainty to future hydrological simulations, in addition to uncertainty related to the choice of a bias correction method. This implies that the nonbias‐corrected results should be provided to end users along with the bias‐corrected ones, along with a detailed explanation of the bias correction procedure. This information would be especially helpful to assist end users in making the most informed decisions.     

表面多次波衰减技术在渤海海峡应用效果

浅水地震勘探对于了解近海底地质构造具有重要意义,目前已被广泛用于油气开发、近岸工程等领域。表面多次波的存在干扰了有效波信息,影响了资料品质,造成解释假象,如何有效地压制多次波,已成为浅水地震勘探中的关键问题。表面多次波衰减方法(SRME)是一种去除海面相关多次波效果较好的技术方法,但是,一般认为SRME技术并不适合于浅水区域。分析了SRME去除多次波的基本原理,并将其应用于海洋高分辨率浅水区域多次波的去除。实际处理效果表明,使用SRME技术处理后的叠加剖面多次波去除效果明显,剖面基底清楚,断面清晰。通过对SRME技术应用于浅水区域的探讨,证实了SRME技术在海洋高分辨率地震勘探浅水区域应用效果较好。