Use of SARAL/AltiKa Observations for Modeling River Flow

In the absence of many gauging stations in the major and mighty river systems, there is a need for satellite-based observations to estimate temporal variations in the river water storage and associated water management. In this study, SARAL/AltiKa application for setting up hydraulic model (HEC-RAS) and river flow simulations over Tapi River India has been discussed. Waveform data of 40 Hz from Ka band altimeter has been used for water levels retrieval in the Tapi river. SARAL/AltiKa retrieved water levels were converted to discharge in the upstream location (track-926) using the rating curve available for the nearby gauging site and using linear spatial interpolation technique. Steady state simulations were done for various flow conditions in the upstream. Validation of river flow model was done in the downstream location (track-367) by comparing simulated and altimeter retrieved water levels (RMSE 0.67 m). Validated model was used to develop rating curve between water levels and simulated discharge for the downstream location which enables to monitor discharge variations from satellite platform in the absence of in situ observations. It has been demonstrated that SARAL/AltiKa data has potential for river flow monitoring and modeling which will feed for flood disaster forecasting, management and planning.     

Role of satellite remote sensing for monitoring of surface water resources in an arid environment

Abstract

Water bodies up to 0.9 ha surface area, which are indistinguishable by Landsat Multispectral Scanner (MSS) due to the latter's poor spatial resolution of 80 m, can be identified and mapped reliably and reasonably within ±10% accuracy by Landsat Thematic Mapper (TM) false colour composite because of its higher spectral and spatial resolution of 30 m. Comparative study of Landsat TM and the Survey of India topographical maps revealed reductions in the water surface and drainage basin areas up to 1.8 to 2.4 and 6.0 to 8.0 times, respectively, over a period of 28 years (1958–1986) due to the biotic interference resulting in desertification in the large adjoining areas.     

Climatology and trends of summer high temperature days in India during 1969–2013

Journal of Earth System Science - Based on the daily maximum air temperature data from 176 stations in India from 1969 to 2013, the climatological distribution of the number of days with high...     

Effect of climate change on runoff of a glacierized Himalayan basin

The continuous increase in the emission of greenhouse gases has resulted in global warming, and substantial changes in the global climate are expected by the end of the current century. The reductions in mass, volume, area and length of glaciers on the global scale are considered as clear signals of a warmer climate. The increased rate of melting under a warmer climate has resulted in the retreating of glaciers. On the long‐term scale, greater melting of glaciers during the coming years could lead to the depletion of available water resources and influence water flows in rivers. It is also very likely that such changes have occurred in Himalayan glaciers, but might have gone unnoticed or not studied in detail. The water resources of the Himalayan region may also be highly vulnerable to such climate changes, because more than 50% of the water resources of India are located in the various tributaries of the Ganges, Indus and the Brahmaputra river system, which are highly dependent on snow and glacier runoff. In the present study, the snowmelt model SNOWMOD has been used to simulate the melt runoff from a highly glacierized small basin for the summer season. The model simulated the distribution and volume of runoff with reasonably good accuracy. Based on a 2‐year simulation, it is found that, on average, the contributions of glacier melt and rainfall in the total runoff are 87% and 13% respectively. The impact of climate change on the monthly distribution of runoff and total summer runoff has been studied with respect to plausible scenarios of temperature and rainfall, both individually and in combined scenarios. The analysis included six temperature scenarios ranging between 0·5 and 3 °C, and four rainfall scenarios (?10%, ?5%, 5%, 10%). The combined scenarios were generated using temperature and rainfall scenarios. The combined scenarios represented a combination of warmer and drier and a combination of warmer and wetter conditions in the study area. The results indicate that, for the study basin, runoff increased linearly with increase in temperature and rainfall. For a temperature rise of 2 °C, the increase in summer streamflow is computed to be about 28%. Changes in rainfall by ±10% resulted in corresponding changes in streamflow by ±3·5%. For the range of climatic scenarios considered, the changes in runoff are more sensitive to changes in temperature, compared with rainfall, which is likely due to the major contribution of melt water in runoff. Such studies are needed for proper assessment of available water resources under a changing climate in the Himalayan region. Copyright © 2005 John Wiley & Sons, Ltd.     

Braided rin gs of saturn—its topology

The general topology of the braiding in Saturn’s F ring is explained by invoking the theory of invariant surfaces to which a plasma would confine itself. This surface, in the framework of serf-consistent fields, is indeed generated by two helicoids turning in opposite directions and are braided.     

Characterization of Black Carbon in the Ambient Air of Agra,India:Seasonal Variation and Meteorological Influence

This study characterizes the black carbon in Agra, India home to the Taj Mahal—and situated in the Indo-Gangetic basin.The mean black carbon concentration is 9.5 μg m~(-3)and, owing to excessive biomass/fossil fuel combustion and automobile emissions, the concentration varies considerably. Seasonally, the black carbon mass concentration is highest in winter, probably due to the increased fossil fuel consumption for heating and cooking, apart from a low boundary layer. The nocturnal peak rises prominently in winter, when the use of domestic heating is excessive. Meanwhile, the concentration is lowest during the monsoon season because of the turbulent atmospheric conditions and the process of washout by precipitation. The ratio of black carbon to brown carbon is less than unity during the entire study period, except in winter(December). This may be because that biomass combustion and diesel exhaust are major black carbon contributors in this region, while a higher ratio in winter may be due to the increased consumption of fossil fuel and wood for heating purposes. ANOVA reveals significant monthly variation in the concentration of black carbon; plus, it is negatively correlated with wind speed and temperature. A high black carbon mass concentration is observed at moderate(1–2 m s~(-1)) wind speed, as compared to calm or turbulent atmospheric conditions.     

Study on changes in bed characteristics and friction factor in the presence of wash load in suspension

Results of an experimental study on the effects of different concentrations of wash load on the size of bed features and resistance to flow in a laboratory flume are presented. The experiments were carried out under different hydraulic conditions in a 30 m long, 0.204 m wide and 0.5 m deep tilting flume under clear water condition and in the presence of different concentration of wash load in the flow. The bed material used consisted of uniform sediment of size 0.96 mm. Analysis of the data indicates that the characteristics of the bed features change and friction factor increases in the presence of different concentration of wash load in the flow. The reasons for changes in the characteristics of the bed features and increase in friction factor in the presence of wash load are identified and a relationship for predicting friction factor in the presence of wash load has been established.     

On the Seddon speed formula

Abstract

The Seddon speed formula expressed mathematically as c = dQ/dA (or alternatively, as c = (1 + m)u_o; where Q is the discharge, A is the area of cross-section, c is the wave speed, u_o is the normal flow velocity, and m is a dimensionless parameter) is revisited in the context of elasticity and thermodynamics. Its link with the linearized solution of St Venant's equations for wave celerity, which does not appear to have been reported in the hydrological literature, is established. The rating exponent m is shown to be equivalent to the dimensionless relative celerity and is found to be the ratio of two specific heats, viz. c_p and c_v which are the specific heats at constant pressure and volume, respectively. The use of the parameter m as a complex variable helps describe shallow wave characteristics, the damping capacity of a wave, and the mechanism of occurrence of the hysteretic phenomenon. The damping capacity is found to describe the magnitude of wave subsidence, whereas the hysteresis also describes the speed of subsidence.