Development of the cyclic p–y curve for a single pile in sandy soil

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.     

Variability in Particle Mixing Rates in Sediments with Polymetallic Nodules in the Equatorial Eastern Pacific as Determined from Measurements of Excess <Superscript>210</Superscript>Pb

Radionuclide activities of ²¹⁰Pb and ²²⁶Ra were measured to determine bioturbation coefficients (D_b) in seven sediment cores from the Korean licensed block for polymetallic nodules in the Clarion–Clipperton Fracture Zone. Variability in D_b is considered in the context of the sedimentological, geochemical, and geotechnical properties of the sediments. D_b values in the studied cores were estimated using a steady-state diffusion model and varied over a wide range from 1.1 to 293 cm²/yr with corresponding mixing depths (L) of 26 to 144 cm. When excepting for spurious results obtained from cores where diffusive mixing does not apply, D_b values range from 1.1 to 9.0 cm²/yr with corresponding mixing depths (L) of 26 to 63 cm. Such wide variability in D_b and L values is exceptional in sites with water depths of ～5000 m and is attributed in this study to an uneven distribution of sediment layers with different shear strengths and total organic carbon (TOC) contents, caused by erosion events. The studied cores can be grouped into two categories based on lithologic associations: layers with high maximum shear strength (MSS) and low TOC content, showing a narrow range of D_b values (1.1–9.0 cm²/yr); and layers with low MSS and high TOC content, yielding much higher D_b values of over 30 cm²/yr. The distribution of different lithologies, and the resultant spatial variability in MSS and labile organic matter content, controls the presence and maximum burrowing depth of infauna by affecting their mobility and the availability of food. This study provides a unique case showing that shear strength, which relates to the degree of sediment consolidation, might be an important factor in controlling rates of bioturbation and sediment mixing depths.     

Changing anthropogenic influence on the Santa Monica Bay watershed

Santa Monica Bay is an open coastal embayment located directly seaward of Los Angeles, California. The Bay provides vital economic value through its water-dependent activities, such as swimming, diving, boating, and fishing. An increase from 100,000 residents in 1900 to 10 million in 2000 has imposed numerous environmental stressors on the Bay, including urbanization of the watershed. Pollutant discharges into the Bay increased throughout the early part of the century, but declined following passage of the Clean Water Act in 1972. Since that time, the predominant source of pollutant inputs has changed from point sources to non-point urban runoff. To assess how present-day and historical pollution interact to affect the environmental quality of Santa Monica Bay, three organizations collaborated on a multi-disciplinary study in 1997, towards which this volume is focused. This paper details the temporal patterns of anthropogenic influence on Santa Monica Bay to provide context for the papers that follow.     

Benthic habitat quality change as measured by macroinfauna community in a tidal flat on the west coast of Korea

Yellow Sea tidal flats are internationally recognised for their contribution to biological diversity and yet are under enormous pressure from reclamation, pollution and overexploitation. The benthic macroinfauna community is the dominant community on these tidal flats and a reliable indicator of benthic environmental changes. We surveyed the current benthic macroinfauna community of the Ganghwa Southern Tidal Flat, the largest remaining Korean mud flat in the Yellow Sea, in order to examine changes in the environmental situation of this benthic ecosystem. The results show a significant decline in species diversity from the last survey made in 2003, and a shift in species composition with appearances of polychaetes indicative of pollution and physical disturbances and other opportunistic species becoming dominant in both density and biomass. The benthic community shift observed during the two study periods may be associated with increased nutrient pollution as well as increased physical disturbances in this area. However, we recognise the limitations of the data both in frequency and scope but believe the significant changes to the composition of the benthic fauna are sufficient to warrant concern. Observations are required to examine the extent to which these human activities induce benthic community shift in this tidal flat.     

Bathymetry enhancement by altimetry-derived gravity anomalies in the East Sea (Sea of Japan)

The gravity-geologic method (GGM) was used to enhance the bathymetry of the East Sea (Sea of Japan) with satellite altimetry-derived free-air gravity anomalies and shipborne depth measurements. By comparison with the bathymetry model of Smith and Sandwell’s (SAS) approach (1994), GGM was found to have an advantage with short wavelength (≤12 km) components, while SAS better predicts longer wavelength (≥25 km) components, despite its dependency on density contrast. To mitigate this limitation, a tuning density contrast of 10.25 g/cm³ between seawater and the seafloor was primarily estimated by the downward continuation method and then validated by the check points method with GGM. Similarly, SAS is limited by the “A” value in low-pass part of the Wiener filter, which defines the effective range of the wavelength components on bathymetry. As a final result, we present an enhanced GGM bathymetry model by integrating all available data.     

Static bay beach concept for scientists and engineers: A review

Headland-bay beach (HBB) is one of the most prominent physiographic features on the oceanic margin of many countries in the world. Under the influence of a predominant swell, its curved periphery in natural environment may reach static equilibrium and remains stable without sediment supply from updrift and/or a riverain source within its own embayment. Coastal scientists and engineers have attempted to develop mathematical expressions to quantify this ideal bay shape since the 1940s. As the scenario with depleting sediment supply has become a common reality on many parts of the world coastline in more recent time, some coastal engineers have advocated a rational approach to mimicking the static bay shape found in nature in order to mitigate beach erosion as well as for coastal management. Nowadays, many useful applications have emerged since the publication of the parabolic bay shape equation (PBSE) developed for static equilibrium planform (SEP) in late 1980s. The advance in modern computer technologies and international collaboration has further facilitated the exchange of knowledge and applications of this static bay beach concept (SBBC).     

Modeling and control of a 75 kW class variable liquid-column oscillator for highly efficient wave energy converter

The modeling and control of a variable liquid-column oscillator having a liquid filled U-tube with air chambers at its vertical columns are presented. As an ocean wave energy extracting device, the structure of the variable liquid-column oscillator (VLCO) is analogous to that of the tuned liquid-column damper used to suppress oscillatory motion in large structures like tall buildings and cargo ships. However, owing to an air spring effect caused by the dynamic pressure of air chambers, the amplitude of response of the VLCO becomes significantly amplified for a desired wave period. The governing equations for the motion of VLCO structure under wave excitation and the motion of liquid with an air spring effect caused by an air–liquid interaction are described by a series of nonlinear differential equations. A set of control parameters for extracting maximum power from various wave conditions is determined for the efficient operation of the VLCO. It is found that the effect of the air spring has an important role to play in making the oscillation of the VLCO match with the ocean wave. In this way, the VLCO provides the most effective mode for extracting energy from the ocean wave.     

Molecular Identification and Expression Analysis of Carbonic Anhydrase VII in Pufferfish (Takifugu rubripes)

Ocean Science Journal - A carbonic anhydrase VII gene, encoding 277 amino acids, was identified in the intestinal tissue of pufferfish (Takifugu rubripes). The translated protein with an 833-bp...     

Description of the post larva of star pipefish,halicampus punctatus (syngnathidae, gasterosteiformes) first found in the southwestern east sea, Korea

Larval specimens ofHalicampus punctatus were collected off Ulsan and Uljin in December 2002 (three specimens) and off Ulsan in December 2003 (one specimen). These specimens are characterized by the following morphological characteristics: rings, 14 + 35 = 49; subdorsal rings, 1 + 3 = 4; dorsal fin rays, 19 – 20; pectoral fin rays, 14 – 15; anal fin rays, 9; head length (HL), 5.8 – 6.7 in the standard length; snout length, 1.9 in HL; snout depth, 3.7 – 5.2 in snout length. The number of caudal fin rays 9 is less than those of the other species in the same genus 10. Wide stripe bands composed of small pigments are shown in the trunk and the tail. Melanophores are not found in the dorsal fin, the pectoral fin, and the anal fin except the caudal fin. The supraoccipital crest is on the head. The frontal ridge is on the dorsal side of front trunk. The blanched ridges on the opercular are fused with a main ridge like a tree branch. A few branched ridges that are small and narrow on the trunk and the tail are fused with the main ridges. We report these specimens as the first record in Korea and name them ‘Byeol-silgo-ki’ in Korean.     

Generation of random waves in time-dependent extended mild-slope equations using a source function method

We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary.