Effect of Sliding Rate on the Activity of Acoustic Emission During Stable Sliding

--The mechanical and statistical characteristics of acoustic emission (AE) events during stable sliding are investigated through a laboratory experiment using a granite specimen with a pre-cut fault. Numerous AE events are found to be generated on the pre-cut fault, indicating that microscopically unstable fracture occurs during macroscopically stable sliding. The composite focal mechanism solution of AE events is determined from the first motion directions of P-waves. The determined mechanism is consistent with the double-couple one expected for the slip on the pre-cut fault. The source radii of large AE events are estimated to be about 10 mm from the widths of the first P-wave pulses. These indicate that the AE events are generated by shear fracture whose faulting area is a part of the pre-cut fault plane. The occurrence of AE events as a stochastic process approximately obeys the Poisson process, if the effect of mutually dependent events consti tuting clusters is corrected. The observed amplitude-frequency relation of AE events approximately follows a power law for a limited amplitude range. As the macroscopic sliding rate increases, the number of AE events per unit sliding distance decreases. This rate dependence of the AE activity is qualitatively consistent with the observation that the real area of contact between sliding surfaces decreases with an increase in the sliding rate as reported in the literature.     

Distribution of vertical crustal movement rates in the Tohoku district, Japan, predicted by least-squares collocation

Least-squares prediction using an empirically deduced local covariance function was performed to investigate the temporal change in the rates of vertical crustal movements in the Tohoku district, Japan. Levelling data covering an area of approximately 450 × 275 km² observed between 1966 and 1995 were used and the results shown in the form of contour maps. Firstly we derived a covariance function of the rates of vertical crustal movement with a Gaussian form function. We used this function to estimate the spatial distribution of the rates of vertical crustal movements. By the present method, a steady tilt of the Tohoku district to the east, toward the Japan Trench and an areal uplift in the southwestern part were well reproduced. Moreover, a significant temporal change in vertical movement rates is clearly seen. Received: 15 July 1996      

Damage Evaluation of Agro-meteorological Hazards in the Maize-Growing Region of Songliao Plain,China: Case Study of Lishu County of Jilin Province

Agro-meteorological hazards such as drought, waterlogging and cool summer occur with very high frequency and affect maize production and social-economic development in the maize-growing region of Songliao Plain, China. Moreover, both the frequency of these hazards and loss from them are considered to be increasing with global warming. The purpose of this paper is to quantitatively analyze the relationships between the fluctuation of maize yield and drought, waterlogging and cool summer, and to evaluate the consequences of these hazards in the maize-growing area of Songliao Plain, taking Lishu county as a case study area based on GIS (Geographic Information System). Crop yield-climate analysis and regression analysis were employed to analyze and quantify relationships between the fluctuation of maize yield and drought, waterlogging and cool summer, and to evaluate the consequences of these hazards. The parameters and model of damage evaluation were presented using weighted comprehensive analysis, and the degree of damage of drought, waterlogging and cool summer to maize production was comprehensively evaluated and regionalized. It is shown that from 1949 to 1990, the negative value years of the fluctuation of maize yield due to meteorological hazards accounted for 55% of seasons, of which 14% was caused by drought, 30% by waterlogging, 4% by cool summer and drought, 9% by cool summer and waterlogging, 13% by drought and waterlogging, 30% by drought, waterlogging and cool summer. Studies on the instability and spatial variation of the fluctuations in maize yield in Lishu county showed that the middle plains are stable areas to climatic influence, while southeastern hills and low mountains, the low lands of the plains along the East Liao River and the western plain are unstable areas in terms of areas in maize yield. The synthetic index of the degree of damage to maize of drought, waterlogging and cool summer showed a strong positive correlation with the ratio of the amount damaged to the normal yield of maize. This suggests that this index can be used to evaluate such damage. The degree of damage of drought, waterlogging and cool summer to maize in Lishu county shows the regional characteristics, which increase gradually from the center to the west and east, this being almost identical with the spatial distribution of the fluctuation of maize yield due to these hazards. This study can be expected to provide the basis for developing strategies to mitigate agro-meteorological hazards and reducing the losses from them, and adjust the medium and long-term distribution of agricultural activities so as to adapt to environmental changes.     

长江干流主要营养盐含量的变化特征——1998~1999年日中合作调查结果分析

根据1998年和1999年秋季在长江干流从重庆至长江口进行的纵向采样和分析,对长江干流的各态氮、磷含量的沿江变化进行研究。从整体上了解长江干流的水质变化特性,特别是营养盐含量的分布状况。研究结果表明,长江干流的SS浓度很高,介于50~400 mg/l。TN、TP浓度分别在70~110 滋mol/L、2~25 滋mol/L之间,前者以NO3-N为主,后者以PTP为主,PO4-P含量仅占TP的10%~20%。DIN/PO4-P的比值在70~160之间,远高于浮游植物生长P限制值,表明长江口及临近海域中P可能是生物生命活动的主要限制因素。葛洲坝水库对SS、TP、TN、NH4-N、BOD、COD等水质有一定的净化作用。长江水体在通过各大城市以及两大湖泊时,BOD、NH4-N负荷的增加迅速,特别是通过重庆、武汉、南京、上海及洞庭湖和鄱阳湖之后尤为明显。N、P含量的上升与人口增长、生活污水排放量及流域内化肥施用量增加有关。洞庭湖和鄱阳湖水系以及周围的面源负荷,对长江流域的营养盐变动有很大的影响。     

Rare Earth, Major and Trace Elements in the Kunimiyama Ferromanganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. Rare earth, major and trace element geochemistry is reported for the Kunimiyama stratiform ferromanganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The deposit immediately overlies greenstones of mid-ocean ridge basalt (MORB) origin and underlies red chert. The ferromanganese ores exhibit remarkable enrichments in Fe, Mn, P, V, Co, Ni, Zn, Y and rare earth elements (excepting Ce) relative to continental crustal abundance. These enriched elements/ Fe ratios and Post-Archean Average Australian Shale-normalized REE patterns of the ferromanganese ores are generally analogous to those of modern hydrothermal ferromanganese plume fall-out precipitates deposited on MOR flanks. However in more detail, Mn and Ti enrichments in the ferromanganese ores are more striking than the modern counterpart, suggesting a significant contribution of hydrogenetic component in the Kunimiyama ores. Our results are consistent with the interpretation that the Kunimiyama ores were umber deposits that primarily formed by hydrothermal plume fall-out precipitation in the Panthalassa Ocean during the Early Permian and then accreted onto the proto-Japanese island arc during the Middle Jurassic. The presence of strong negative Ce anomaly in the Kunimiyama ores may indicate that the Early Permian Panthalassa seawater had a more striking negative Ce anomaly due to a more oxidizing oceanic condition than today.     

Cathodoluminescence of high-pressure feldspar minerals as a shock barometer

Cathodoluminescence (CL) analyses were carried out on maskelynite and lingunite in L6 chondrites of Tenham and Yamato-790729. Under CL microscopy, bright blue emission was observed in Na-lingunite in the shock veins. Dull blue-emitting maskelynite is adjacent to the shock veins, and aqua blue luminescent plagioclase lies farther away. CL spectroscopy of the Na-lingunite showed emission bands centered at ~330, 360–380, and ~590 nm. CL spectra of maskelynite consisted of emission bands at ~330 and ~380 nm. Only an emission band at 420 nm was recognized in crystalline plagioclase. Deconvolution of CL spectra from maskelynite successfully separated the UV–blue emission bands into Gaussian components at 3.88, 3.26, and 2.95 eV. For comparison, we prepared K-lingunite and experimentally shock-recovered feldspars at the known shock pressures of 11.1–41.2 GPa to measure CL spectra. Synthetic K-lingunite has similar UV–blue and characteristic yellow bands at ~550, ~660, ~720, ~750, and ~770 nm. The UV–blue emissions of shock-recovered feldspars and the diaplectic feldspar glasses show a good correlation between intensity and shock pressure after deconvolution. They may be assigned to pressure-induced defects in Si and Al octahedra and tetrahedra. The components at 3.88 and 3.26 eV were detectable in the lingunite, both of which may be caused by the defects in Si and Al octahedra, the same as maskelynite. CL of maskelynite and lingunite may be applicable to estimate shock pressure for feldspar-bearing meteorites, impactites, and samples returned by spacecraft mission, although we need to develop more as a reliable shock barometer.     

Implications for behavior of volatile elements during impacts—Zinc and copper systematics in sediments from the Ries impact structure and central European tektites

Moldavites are tektites genetically related to the Ries impact structure, located in Central Europe, but the source materials and the processes related to the chemical fractionation of moldavites are not fully constrained. To further understand moldavite genesis, the Cu and Zn abundances and isotope compositions were measured in a suite of tektites from four different substrewn fields (South Bohemia, Moravia, Cheb Basin, Lusatia) and chemically diverse sediments from the surroundings of the Ries impact structure. Moldavites are slightly depleted in Zn (~10–20%) and distinctly depleted in Cu (>90%) relative to supposed sedimentary precursors. Moreover, the moldavites show a wide range in δ⁶⁶Zn values between 1.7 and 3.7‰ (relative to JMC 3‐0749 Lyon) and δ⁶⁵Cu values between 1.6 and 12.5‰ (relative to NIST SRM 976) and are thus enriched in heavy isotopes relative to their possible parent sedimentary sources (δ⁶⁶Zn = ?0.07 to +0.64‰; δ⁶⁵Cu = ?0.4 to +0.7‰). In particular, the Cheb Basin moldavites show some of the highest δ⁶⁵Cu values (up to 12.5‰) ever observed in natural samples. The relative magnitude of isotope fractionation for Cu and Zn seen here is opposite to oxygen‐poor environments such as the Moon where Zn is significantly more isotopically fractionated than Cu. One possibility is that monovalent Cu diffuses faster than divalent Zn in the reduced melt and diffusion will not affect the extent of Zn isotope fractionation. These observations imply that the capability of forming a redox environment may aid in volatilizing some elements, accompanied by isotope fractionation, during the impact process. The greater extent of elemental depletion, coupled with isotope fractionation of more refractory Cu relative to Zn, may also hinge on the presence of carbonyl species of transition metals and electromagnetic charge, which could exist in the impact‐induced high‐velocity jet of vapor and melts.     

CME Velocity and Acceleration Error Estimates Using the Bootstrap Method

The bootstrap method is used to determine errors of basic attributes of coronal mass ejections (CMEs) visually identified in images obtained by the Solar and Heliospheric Observatory (SOHO) mission’s Large Angle and Spectrometric Coronagraph (LASCO) instruments. The basic parameters of CMEs are stored, among others, in a database known as the SOHO/LASCO CME catalog and are widely employed for many research studies. The basic attributes of CMEs (e.g. velocity and acceleration) are obtained from manually generated height-time plots. The subjective nature of manual measurements introduces random errors that are difficult to quantify. In many studies the impact of such measurement errors is overlooked. In this study we present a new possibility to estimate measurements errors in the basic attributes of CMEs. This approach is a computer-intensive method because it requires repeating the original data analysis procedure several times using replicate datasets. This is also commonly called the bootstrap method in the literature. We show that the bootstrap approach can be used to estimate the errors of the basic attributes of CMEs having moderately large numbers of height-time measurements. The velocity errors are in the vast majority small and depend mostly on the number of height-time points measured for a particular event. In the case of acceleration, the errors are significant, and for more than half of all CMEs, they are larger than the acceleration itself.