Local hydraulic gradient estimator analysis of long-term monitoring networks

Three measurements of head at unique locations form a three-point estimator of the local magnitude and orientation of the hydraulic gradient. The relative head measurement error (RHME) is defined here as the measurement error normalized by the head drop across the three-point estimator. Monte Carlo simulation results show that estimators with base to height ratios between 0.5 and 5.0 and that are large enough to keep the RHME below 0.05 create the most accurate gradient estimates and provide criteria for identifying good estimators. These criteria are applied to an example ground water monitoring network design problem in the Culebra dolomite near the Waste Isolation Pilot Plant repository to both analyze temporal changes and modify and expand the current monitoring network. Limiting the three-point estimators to those that meet the shape and RHME criteria reduces the number of possible estimators by >50% and leads to approximately 1 order of magnitude decrease in the average estimated magnitude of the gradient relative to using all estimators. Application of these criteria also reduces the variability in estimated gradient magnitude and orientation between the two time periods of measurements. Redundant wells in the network are identified by removing each existing well in turn and determining which removals yield the smallest decrease in the number of acceptable estimators. Optimal new well locations are identified by mapping the increase in total number of acceptable estimators for a single new well placed in the study domain.     

Organizing some very tenuous things: Resonant structures in Saturn's faint rings

Images of the dusty rings obtained by the Cassini spacecraft in late 2006 and early 2007 reveal unusual structures composed of alternating canted bright and dark streaks in the outer G ring (∼170,000 km from Saturn center), the inner Roche Division (∼138,000 km) and the middle D ring (70,000-73,000 km). The morphology, locations and pattern speeds of these features indicate that they are generated by Lindblad resonances. The structure in the G ring appears to be generated by the 8:7 Inner Lindblad Resonance with Mimas. Based in part on the morphology of the G ring structure, we develop a phenomenological model of Lindblad-resonance-induced structures in faint rings, where the observed variations in the rings' optical depth and brightness are due to alignments and trends in the particles' orbital parameters with semi-major axis. To reproduce the canted character of these structures, this model requires a term in the equations of motion that damps eccentricities. Using this model to interpret the structures in the D ring and Roche Division, we find that the D-ring patterns mimic those predicted at 2:1 Inner Lindblad Resonances and the Roche Division patterns look like those expected at 3:4 Outer Lindblad Resonances. As in the G ring, the effective eccentricity-damping timescale is of order 10-100 days, suggesting that free eccentricities are strongly damped by some mechanism that operates throughout all these regions. However, unlike in the G ring, perturbation forces with multiple periods are required to explain the observed patterns in the D ring and Roche Division. The strongest perturbation periods occur at 10.53, 10.56 and 10.74 hours (only detectable in the D ring) and 10.82 hours (detectable in both the D ring and Roche division). These periods are comparable to the rotation periods of Saturn's atmosphere and magnetosphere. The inferred strength of the perturbation forces required to produce these patterns (and the absence of evidence for other resonances driven by these periods in the main rings) suggests that non-gravitational forces are responsible for generating these features in the D ring and Roche Division. If this interpretation is correct, then some of these structures may have some connection with periodic signals observed in Saturn's magnetic field and radio-wave emissions, and accordingly could help clarify the nature and origin(s) of these magnetospheric asymmetries.     

Grooves on small saturnian satellites and other objects: Characteristics and significance

High-resolution images from the Cassini Imaging Science Subsystem (ISS) show parallel sets of grooves on Epimetheus and Pandora. Grooves have previously been observed on other satellites and asteroids, including Phobos, Gaspra, Ida, Eros, and minor occurrences on Phoebe. Sets of parallel grooves are so far observed only on satellites known or likely to be subject to significant tidal stresses, such as forced librations. Grooves on asteroids and on satellites not subject to significant forced librations occur in more globally disorganized patterns that may reflect impacts, varying internal structures, or even thermal stresses. The patterns and individual morphologies of grooves on the tidally-affected satellites suggest fracturing in weak materials due to tidal stresses and forced librations.     

The diverse nature of optical emission lines in brightest cluster galaxies: IFU observations of the central kiloparsec

We present integral field spectroscopy of the nebular line emission in a sample of nine brightest cluster galaxies (BCGs). The sample was chosen to probe both cooling flow and non-cooling flow clusters, as well as a range of cluster X-ray luminosities. The line emission morphology and velocity gradients suggest a great diversity in the properties of the line emitting gas. While some BCGs show evidence for filamentary or patchy emission (Abell 1060, Abell 1668 and MKW 3s), others have extended emission (Abell 1204, Abell 2199), while still others have centrally concentrated emission (Abell 2052). We examine diagnostic line ratios to determine the dominant ionization mechanisms in each galaxy. Most of the galaxies show regions with active galactic nucleus like spectra, however, for two BCGs, Abell 1060 and Abell 1204, the emission line diagnostics suggest regions which can be described by the emission from young stellar populations. The diversity of emission-line properties in our sample of BCGs suggests that the emission mechanism is not universal, with different ionization processes dominating different systems. Given this diversity, there is no evidence for a clear distinction of the emission-line properties between cooling flow and non-cooling flow BCGs. It is not always cooling flow BCGs which show emission (or young stellar populations), and non-cooling flow BCGs which do not.     

Investigation of acidic dissolution of mixed clays between pH 1.0 and −3.0 using Si and Al X-ray absorption near edge structure

Although widely investigated in relation to acid mine drainage systems at pH > 1.0, we know little about the impact of sulfuric acid (H₂SO₄) on the geochemistry and mineralogy of clays at pH < 1.0 (including negative pH values). Thus, laboratory batch experiments were conducted on three mixed clay samples with different mass ratios of phyllosilicates (smectite, illite, and kaolinite) to investigate the impact of H₂SO₄ from pH 1.0 to −3.0 for exposure periods of 14, 90, 180, and 365 days. Si and Al K- and L_2,3-edge X-ray absorption near edge structure (XANES) spectroscopy were employed on these samples to determine the chemical and structural changes that occur during acidic dissolution of phyllosilicates that cannot be distinguished using X-ray diffraction analyses. A series of silicate, phyllosilicate, and Al-bearing standard compounds were also studied to provide an explanation for the observed changes in the clay samples. The Si XANES results indicated the preferential dissolution of the phyllosilicates (pH ? 1.0, t ? 14 d), the persistence of quartz even at pH ? −3.0 and t ? 365 d, and the formation of an amorphous silica-like phase that was confined to the surface layer of the altered clay samples at pH ? 0.0 and t ? 90 d). Al XANES results demonstrated dissolution of Al-octahedral layers (pH ? 1.0, t ? 14 d), the persistence of four-fold relative to six-fold coordinated Al, and the precipitation of an Al-SO₄-rich phase (pH ? −1.0, t ? 90 d). An existing conceptual model of phyllosilicate dissolution under extremely acidic conditions was modified to include the results of this study.     

Objectives of fisheries management: case studies from the UK, France, Spain and Denmark

The main objectives of fisheries management are generally similar throughout the world. These are often stated in policy documents such as the Common Fisheries Policy and the Magnuson–Stevens Fishery Conservation and Management Act. However, at the local level often the key objectives of management are more detailed, characterised by both the overriding management structure and the status and type of fishery concerned. In this paper, we consider case study fisheries from the UK, France, Spain and Denmark to compare some of the various types of fisheries and fisheries management systems that exist in the European Union. From this, we define the key objectives for each management system.     

Realistic survey simulations for kilometer class near Earth objects

We present a new Near Earth Object (NEO) survey simulator which incorporates the four-dimensional population model of 4668 NEOs [Bottke, W.F., Morbidelli, A., Jedicke, R., Petit, J.-M., Levison, H.F., Michel, P., Metcalfe, T.S., 2002. Icarus 156, 399-433] and the observing strategies of most asteroid search programs. With the recent expansion of survey capabilities, previous simulators focused on a specific survey facility are no longer useful in predicting the future detection rates. Our simulation is a superposition of simplified search patterns adopted by all major wide-field surveys in operation in both hemispheres. We defined five different simulation periods to follow the evolution of survey efficiencies reflecting changes in either search volume as a result of upgrades of telescopes and instruments or in observing schedules. The simulator makes remarkably good reproductions of actual survey results as of December 2005, not only the total number of detections but also (a,e,i,H) (‘H’ means absolute magnitude of an asteroid) distributions. An extended experiment provides excellent predictions for discovery statistics of NEOs (H<18) reported to the Minor Planet Center in 2006. These support that our simulator is a plausible approximation of real surveys. We further confirm that, with the Bottke et al. [Bottke, W.F., Morbidelli, A., Jedicke, R., Petit, J.-M., Levison, H.F., Michel, P., Metcalfe, T.S., 2002. Icarus 156, 399-433] population model and present survey capability, the 90% completeness level of kilometer-sized NEOs will be achieved by 2010 or 2011. However, about 8% of the kilometer-sized or larger NEOs would remain undetected even after 10-year operation (2007-2016) of all current NEO survey facilities. They are apparently faint, with orbits characterized by large semimajor axis and higher eccentricity; these “hardest-to-find” objects tend to elude the search volume of existing NEO survey facilities. Our simulation suggests that 15% of undetectable objects are Atens and Inner Earth Objects. Because of their orbital characteristics, they will remain within ±45° from the Sun, thus cannot be discovered in the forthcoming decade if our effort is limited to current ground-based telescopes.     

Observable consequences of planet formation models in systems with close-in terrestrial planets

To date, two planetary systems have been discovered with close-in, terrestrial-mass planets     . Many more such discoveries are anticipated in the coming years with radial velocity and transit searches. Here we investigate the different mechanisms that could form 'hot Earths' and their observable predictions. Models include: (1) in situ accretion; (2) formation at larger orbital distance followed by inward 'type 1' migration; (3) formation from material being 'shepherded' inward by a migrating gas giant planet; (4) formation from material being shepherded by moving secular resonances during dispersal of the protoplanetary disc; (5) tidal circularization of eccentric terrestrial planets with close-in perihelion distances and (6) photoevaporative mass-loss of a close-in giant planet. Models 1–4 have been validated in previous work. We show that tidal circularization can form hot Earths, but only for relatively massive planets     with very close-in perihelion distances (≲0.025 au), and even then the net inward movement in orbital distance is at most only 0.1–0.15 au. For planets of less than     , photoevaporation can remove the planet's envelope and leave behind the solid core on a Gyr time-scale, but only for planets inside 0.025–0.05 au. Using two quantities that are observable by current and upcoming missions, we show that these models each produce unique signatures, and can be observationally distinguished. These observables are the planetary system architecture (detectable with radial velocities, transits and transit timing) and the bulk composition of transiting close-in terrestrial planets (measured by transits via the planet's radius).     

Stratigraphic architecture of Solander Basin records Southern Ocean currents and subduction initiation beneath southwest New Zealand

Solander Basin is characterized by subduction initiation at the Pacific‐Australia plate boundary, where high biological productivity is found at the northern edge of the Antarctic Circumpolar Current. Sedimentary architecture results from tectonic influences on accommodation space, sediment supply and ocean currents (via physiography); and climate influence on ocean currents and biological productivity. We present the first seismic‐stratigraphic analysis of Solander Basin based on high‐fold seismic‐reflection data (voyage MGL1803, SISIE). Solander Trough physiography formed by Eocene rifting, but basinal strata are mostly younger than ca. 17 Ma, when we infer Puysegur Ridge formed and sheltered Solander Basin from bottom currents, and mountain growth onshore increased sediment supply. Initial inversion on the Tauru Fault started at ca. 15 Ma, but reverse faulting from 12 to ca. 8 Ma on both the Tauru and Parara Faults was likely associated with reorganization and formation of the subduction thrust. The new seabed topography forced sediment pathways to become channelized at low points or antecedent gorges. Since 5 Ma, southern Puysegur Ridge and Fiordland mountains spread out towards the east and Solander Anticline grew in response to ongoing subduction and growth of a slab. Solander Basin had high sedimentation rates because (1) it is sheltered from bottom currents by Puysegur Ridge; and (2) it has a mountainous land area that supplies sediment to its northern end. Sedimentary architecture is asymmetric due to the Subtropical Front, which moves pelagic and hemi‐pelagic sediment, including dilute parts of gravity flows, eastward and accretes contourites to the shelf south of Stewart Island. Levees, scours, drifts and ridges of folded sediment characterize western Solander Basin, whereas hemi‐pelagic drape and secondary gravity flows are found east of the meandering axial Solander Channel. The high‐resolution record of climate and tectonics that Solander Basin contains may yield excellent sites for future scientific ocean drilling.