Channel overflows of the Pōhue Bay flow,Mauna Loa,Hawai'i: examples of the contrast between surface and interior lava

A number of overflows from a large lava channel and tube system on the southwest rift zone of Mauna Loa were studied. Initial overflows were very low viscosity gas-rich phoehoe evidenced by flow-unit aspect ratios and vesicle sizes and contents. Calculated volumetric flow-rates in the channel range between 80 and 890 m³/s, and those of the overflows between 35 and 110 m³/s. After traveling tens to hundreds of meters the tops of these sheet-like overflows were disrupted into a surface composed of clinker and phoehoe fragments. After these 'a' overflows came to rest, lava from the interiors was able to break out on to the surface as phoehoe. The surface structure of a lava flow records the interaction between the differential shear rate (usually correlated with the volumetric flow-rate) and viscosity-induced resistance to flow. However, the interior of a flow, being better insulated, may react differently or record a later set of emplacement conditions. Clefts of toothpaste lava occurring within fields of clinker on proximal-type 'a' flows also record different shear rates during different times of flow emplacement. The interplay between viscosity and shear rate determines the final morphological lava type, and although no specific portion of lava ever makes a transition from 'a' back to phoehoe, parts of a flow can appear to do so.     

Channel response to a dam-removal sediment pulse captured at high-temporal resolution using routine gage data

In this study, we captured how a river channel responds to a sediment pulse originating from a dam removal using multiple lines of evidence derived from streamflow gages along the Patapsco River, Maryland, USA. Gages captured characteristics of the sediment pulse, including travel times of its leading edge (~7.8 km yr⁻¹) and peak (~2.6 km yr⁻¹) and suggest both translation and increasing dispersion. The pulse also changed local hydraulics and energy conditions, increasing flow velocities and Froude number, due to bed fining, homogenization and/or slope adjustment. Immediately downstream of the dam, recovery to pre-pulse conditions occurred within the year, but farther downstream recovery was slower, with the tail of the sediment pulse working through the lower river by the end of the study 7 years later. The patterns and timing of channel change associated with the sediment pulse were not driven by large flow or suspended sediment-transporting events, with change mostly occurring during lower flows. This suggests pulse mobility was controlled by process-factors largely independent of high flow. In contrast, persistent changes occurred to out-of-channel flooding dynamics. Stage associated with flooding increased during the arrival of the sediment pulse, 1 to 2 years after dam removal, suggesting persistent sediment deposition at the channel margins and nearby floodplain. This resulted in National Weather Service-indicated flood stages being attained by 3–43% smaller discharges compared to earlier in the study period. This study captured a two-signal response from the sediment pulse: (1) short- to medium-term (weeks to months) translation and dispersion within the channel, resulting in aggradation and recovery of bed elevations and changing local hydraulics; and (2) dispersion and persistent longer-term (years) effects of sediment deposition on overbank surfaces. This study further demonstrated the utility of US Geological Survey gage data to quantify geomorphic change, increase temporal resolution, and provide insights into trajectories of change over varying spatial and temporal scales.     

Long-term diagnostics of precipitation estimates and the development of radar hardware monitoring within a radar product data quality management system

Abstract

Quality is key to ensuring that the potential offered by weather radar networks is realized. To achieve optimum quality, a comprehensive radar data quality management system, designed to monitor the end-to-end radar data processing chain and evaluate product quality, is being developed at the UK Met Office. Three contrasting elements of this system are described: monitoring of key radar hardware performance indicators; generation of long-term integrations of radar products; and monitoring of radar reflectivity factor using synthesized observations from numerical weather prediction model fields. Examples of each component are presented and ways in which the different types of monitoring information have been used to both identify issues with the radar product data quality and help formulate solutions are given.

Editor Z.W. Kundzewicz; Guest editor R.J. Moore

Citation Harrison, D., Georgiou, S., Gaussiat, N., and Curtis, A., 2013. Long-term diagnostics of precipitation estimates and the development of radar hardware monitoring within a radar product data quality management system. Hydrological Sciences Journal, 59 (7), 1327–1342. http://dx.doi.org/10.1080/02626667.2013.841316     

Determination of Geopotential Differences between Local Vertical Datums and Realization of a World Height System

The methodology developed for connecting Local Vertical Datums (LVD) was applied to the Australian Height Datum (AHD) and the North American Vertical Datum (NAVD88). The geopotential values at AHD and NAVD88 were computed and the corresponding vertical offset of 974 mm with rms 51 mm was obtained between the zero reference surfaces defined by AHD and NAVD88. The solution is based on the four primary geodetic parameters, the GPS/levelling sites and the geopotential model EGM96. The Global Height System (or the Major Vertical Datum) can be defined by a geoidal geopotential value used in the solution as the reference value, or by the geopotential value of the LVD, e.g. NAVD88.     

Measurement and implication of "effective" viscosity for rhyolite flow emplacement

Hazardous explosive activity may sporadically accompany the extrusion of silicic lava domes. Modelling of the emplacement of silicic domes is therefore an important task for volcanic hazard assessment. Such modelling has been hampered by a lack of a sufficiently accurate rheological database for silicic lavas with crystals and vesicles. In the present study, the parallel-plate viscometry method was applied to determine the shear viscosity of five natural rhyolitic samples from a vertical section through the Ben Lomond lava dome, Taupo Volcanic Centre, New Zealand. Rheological measurements were performed at volcanologically relevant temperatures (780-950°C) and strain rates (10^-5-10^-7 s^-1). Although these samples are in the metastable state, viscosity determinations, melt composition, as well as water and crystal contents of samples were demonstrably stable during experiments. For samples containing up to 5 vol.% microlites, the composition of the melt, rather than the physical effect of suspended crystals, had greater influence on the effective viscosity of the silicic magma. Samples with 10 vol.% microlites and containing a flow banding defined by microlites show no significant orientational effects on apparent viscosity. The rheological measurements were used together with a simple cooling model to construct thermal and viscosity profiles revealing conditions during the emplacement of the Ben Lomond lava dome.     

Constraints on spatial variability in soft-sediment communities affected by contamination from an Antarctic waste disposal site

A small-scale (<500 m length) transect-based survey was conducted in December 1998 to examine the spatial distribution of soft-sediment communities and of concentrations of heavy metals and hydrocarbons in sediments in Brown Bay, adjacent to an abandoned waste dump, at Casey Station, Antarctica. Samples were taken along three transects at increasing distances (nine stations) from the shore-line waste dump. A gradient of contamination was detected, but concentrations of contaminants were very variable with "hotspots" or high levels of contaminants at some stations. Multivariate analysis revealed that the distribution of soft-sediment communities was distinctly different between the inner, middle and outer stations. Abundances of most taxa were very variable with few patterns apparent, but some fauna displayed an abundance gradient from the inner to the outer part of the bay. Many taxa had maximum abundances at outer stations and minimum at inner stations. Multivariate correlations between environmental variables and soft-sediment communities indicated that combinations of some metals (Cd, Cu, Sn, Pb) and grain size (mainly finer fractions, fine sands and coarse silts) were the variables that best "matched" the community patterns within Brown Bay. This study indicated that there were significant correlations between the presence of contaminants and the distribution and composition of soft-sediment communities over very small spatial scales.     

Transboundary impacts on regional ground water modeling in Texas

Recent legislation required regional grassroots water resources planning across the entire state of Texas. The Texas Water Development Board (TWDB), the state's primary water resource planning agency, divided the state into 16 planning regions. Each planning group developed plans to manage both ground water and surface water sources and to meet future demands of various combinations of domestic, agricultural, municipal, and industrial water consumers. This presentation describes the challenges in developing a ground water model for the Llano Estacado Regional Water Planning Group (LERWPG), whose region includes 21 counties in the Southern High Plains of Texas. While surface water is supplied to several cities in this region, the vast majority of the regional water use comes from the High Plains aquifer system, often locally referred to as the Ogallala Aquifer. Over 95% of the ground water demand is for irrigated agriculture. The LERWPG had to predict the impact of future TWDB-projected water demands, as provided by the TWDB, on the aquifer for the period 2000 to 2050. If detrimental impacts were noted, alternative management strategies must be proposed. While much effort was spent on evaluating the current status of the ground water reserves, an appropriate numerical model of the aquifer system was necessary to demonstrate future impacts of the predicted withdrawals as well as the effects of the alternative strategies. The modeling effort was completed in the summer of 2000. This presentation concentrates on the political, scientific, and nontechnical issues in this planning process that complicated the modeling effort. Uncertainties in data, most significantly in distribution and intensity of recharge and withdrawals, significantly impacted the calibration and predictive modeling efforts. Four predictive scenarios, including baseline projections, recurrence of the drought of record, precipitation enhancement, and reduced irrigation demand, were simulated to identify counties at risk of low final ground water storage volume or low levels of satisfied demand by 2050.     

A simple method for calculating growth rates of petroleum hydrocarbon plumes

Consumption of aquifer Fe(III) during biodegradation of ground water contaminants may result in expansion of a contaminant plume, changing the outlook for monitored natural attenuation. Data from two research sites contaminated with petroleum hydrocarbons show that toluene and xylenes degrade under methanogenic conditions, but the benzene and ethylbenzene plumes grow as aquifer Fe(III) supplies are depleted. By considering a one-dimensional reaction front in a constant unidirectional flow field, it is possible to derive a simple expression for the growth rate of a benzene plume. The method balances the mass flux of benzene with the Fe(III) content of the aquifer, assuming that the biodegradation reaction is instantaneous. The resulting expression shows that the benzene front migration is retarded relative to the ground water velocity by a factor that depends on the concentrations of hydrocarbon and bioavailable Fe(III). The method provides good agreement with benzene plumes at a crude oil study site in Minnesota and a gasoline site in South Carolina. Compared to the South Carolina site, the Minnesota site has 25% higher benzene flux but eight times the Fe(III), leading to about one-sixth the expansion rate. Although it was developed for benzene, toluene, ethylbenzene, and xylenes, the growth-rate estimation method may have applications to contaminant plumes from other persistent contaminant sources.     

The International Laser Ranging Service and its support for IGGOS

The International Laser Ranging Service (ILRS) was established in September 1998 as a service within the IAG to support programs in geodetic, geophysical, and lunar research activities and to provide data products to the International Earth Rotation Service (IERS) in support of its prime objectives. Now in operation for 5 years, the ILRS develops: (1) the standards and specifications necessary for product consistency and (2) the priorities and tracking strategies required to maximize network efficiency. The service collects, merges, analyzes, archives and distributes satellite and lunar laser ranging data to satisfy a variety of scientific, engineering, and operational needs and encourages the application of new technologies to enhance the quality, quantity, and cost effectiveness of its data products. The ILRS works with: (1) the global network to improve station performance; (2) new satellite missions in the design and building of retroreflector targets to maximize data quality and quantity and (3) science programs to optimize scientific data yield. The ILRS Central Bureau maintains a comprehensive web site as the primary vehicle for the distribution of information within the ILRS community. The site, which can be accessed at: http://ilrs.gsfc.nasa.gov is also available at mirrored sites at the Communications Research Laboratory (CRL) in Tokyo and the European Data Center (EDC) in Munich.During the last 2 years, the ILRS has addressed very important challenges: (1) data from the field stations are now submitted hourly and made available immediately through the data centers for access by the user community; (2) tracking on low satellites has been significantly improved through the sub-daily issue of predictions, drag functions, and the real-time exchange of time biases; (3) analysis products are now submitted in SINEX format for compatibility with the other space geodesy techniques; (4) the Analysis Working Group is heavily engaged in Pilot Projects as it works toward an ILRS “standard” global solution and (5) SLR has significantly increased its participation in the International Terrestrial Reference Frame (ITRF) activity, which is important to the success of IGGOS.