Radar Observations of Asteroid 3908 Nyx

We report Doppler-only (cw) radar observations of basaltic near-Earth asteroid 3908 Nyx obtained at Arecibo and Goldstone in September and October of 1988. The circular polarization ratio of 0.75±0.03 exceeds ∼90% of those reported among radar-detected near-Earth asteroids and it implies an extremely rough near-surface at centimeter-to-decimeter spatial scales. Echo power spectra over narrow longitudinal intervals show a central dip indicative of at least one significant concavity. Inversion of cw spectra yields two statistically indistinguishable shape models that have similar shapes and dimensions but pole directions that differ by ∼100°. We adopt one as our working model and explore its implications. It has an effective diameter of 1.0±0.15 km and radar and visual geometric albedos of 0.15±0.075 and 0.16^+0.08_−0.05. The visual albedo supports the interpretation by D. P. Cruikshank et al. (1991, Icarus89, 1-13) that Nyx has a thermal inertia consistent with that of bare rock. The model is irregular, modestly asymmetric, and topographically rugged.     

Inflight Calibration of the NEAR Multispectral Imager: II. Results from Eros Approach and Orbit

During the Near-Earth Asteroid Rendezvous (NEAR) spacecraft's investigation of asteroid 433 Eros, inflight calibration measurements from the multispectral imager (MSI) have provided refined knowledge of the camera's radiometric performance, pointing, and light-scattering characteristics. Measurements while at Eros corroborate most earlier calibration results, although there appears to be a small, gradual change in instrument dark current and flat field due to effects of aging in the space environment. The most pronounced change in instrument behavior, however, is a dramatic increase in scattered light due to contaminants accumulated on the optics during unscheduled fuel usage in December 1998. Procedures to accurately quantify and to remediate the scattered light are described in a companion paper (Li et al. 2002, Icarus155, 00-00). Acquisition of Eros measurements has clarified the relative, filter-to-filter, radiometric performance of the MSI. Absolute radiometric calibration appears very well constrained from flight measurements, with an accuracy of ∼5%. Pointing relative to the spacecraft coordinate system can be determined from the temperature of the spacecraft deck with an accuracy of ∼1 pixel.     

Link between SSZ ophiolite formation, emplacement and arc inception, Northland, New Zealand: U–Pb SHRIMP constraints; Cenozoic SW Pacific tectonic implications

New U–Pb age-data from zircons separated from a Northland ophiolite gabbro yield a mean ²⁰⁶Pb/²³⁸U age of 31.6 ± 0.2 Ma, providing support for a recently determined 28.3 ± 0.2 Ma SHRIMP age of an associated plagiogranite and  29–26 Ma ⁴⁰Ar/³⁹Ar ages (n = 9) of basalts of the ophiolite. Elsewhere, Miocene arc-related calc-alkaline andesite dikes which intrude the ophiolitic rocks contain zircons which yield mean ²⁰⁶Pb/²³⁸U ages of 20.1 ± 0.2 and 19.8 ± 0.2 Ma. The ophiolite gabbro and the andesites both contain rare inherited zircons ranging from 122–104 Ma. The Early Cretaceous zircons in the arc andesites are interpreted as xenocrysts from the Mt. Camel basement terrane through which magmas of the Northland Miocene arc lavas erupted. The inherited zircons in the ophiolite gabbros suggest that a small fraction of this basement was introduced into the suboceanic mantle by subduction and mixed with mantle melts during ophiolite formation.

We postulate that the tholeiitic suite of the ophiolite represents the crustal segment of SSZ lithosphere (SSZL) generated in the southern South Fiji Basin (SFB) at a northeast-dipping subduction zone that was initiated at about 35 Ma. The subduction zone nucleated along a pre-existing transform boundary separating circa 45–20 Ma oceanic lithosphere to the north and west of the Northland Peninsula from nascent back arc basin lithosphere of the SFB. Construction of the SSZL propagated southward along the transform boundary as the SFB continued to unzip to the southeast. After subduction of a large portion of oceanic lithosphere by about 26 Ma and collision of the SSZL with New Zealand, compression between the Australian Plate and the Pacific Plate was taken up along a new southwest-dipping subduction zone behind the SSZL. Renewed volcanism began in the oceanic forearc at 25 Ma producing boninitic-like, SSZ and within-plate alkalic and calc-alkaline rocks. Rocks of these types temporally overlap ophiolite emplacement and subsequent Miocene continental arc construction.     

Simulation of a Stably Stratified Atmospheric Boundary Layer Using One-Dimensional Turbulence

One-dimensional turbulence (ODT) is a single-column simulation in which vertical motions are represented by an unsteady advective process, rather than their customary representation by a diffusive process. No space or time averaging of mesh-resolved motions is invoked. Molecular-transport scales can be resolved in ODT simulations of laboratory-scale flows, but this resolution of these scales is prohibitively expensive in ODT simulations of the atmospheric boundary layer (ABL), except possibly in small subregions of a non-uniform mesh.Here, two methods for ODT simulation of the ABL on uniform meshes are described and applied to the GABLS (GEWEX Atmospheric Boundary Layer Study; GEWEX is the Global Energy and Water Cycle Experiment) stable boundary-layer intercomparison case. One method involves resolution of the roughness scale using a fixed eddy viscosity to represent subgrid motions. The other method, which is implemented at lower spatial resolution, involves a variable eddy viscosity determined by the local mesh-resolved flow, as in multi-dimensional large-eddy simulation (LES). When run at typical LES resolution, it reproduces some of the key high-resolution results, but its fidelity is lower in some important respects. It is concluded that a more elaborate empirically based representation of the subgrid physics, closely analogous to closures currently employed in LES of the ABL, might improve its performance substantially, yielding a cost-effective ABL simulation tool. Prospects for further application of ODT to the ABL, including possible use of ODT as a near-surface subgrid closure framework for general circulation modeling, are assessed.     

The community morphology of skilled migration: the changing role of voluntary and community organisations (VCOs) in the grounding of British migrant identities in Paris (France)

Research into skilled migrant communities tends to emphasize the grounding of identities through transnationalism and mobility. Less research has been conducted into how skilled migrants actually ground their identities within the city through everyday social networks. The paper addresses this imbalance by examining the changing significance of British voluntary and community organisations (VCOs) in Paris, France. Combining qualitative and quantitative data, findings show local migrant networks to be important focal points for the British even though migrants’ lives may increasingly be transnational in orientation. The research also shows that in situ social networks are evolving. Specifically, traditional forms of elite expatriate communality are not as omnipotent as they once were, with the popularity of some high-profile British VCOs in Paris declining over recent decades. The paper argues that the link between social dynamism and communal morphology helps explain this shift: as British middle-class lifestyles have fragmented, and as the British migrant population in Paris has grown in scale and scope, so the range of VCOs and associated informal networks has grown. Whilst some skilled migrants still embed within traditional expatriate organisations, Britishness is increasingly grounded elsewhere; both within the city through alternative social networks, and located beyond the city through transnational ties.     

A novel approach to estimate iron distribution within different pore domains of structured media

The Fe content of soils and aquifer solids is usually quantified using different extraction solutions performed with homogenized samples in a well-mixed batch experiment. For structured media where preferential flow prevails over the matrix flow, however, the Fe content determined from homogenized samples may not well represent the Fe available for biogeochemical reactions. In this study ammonium oxalate extraction was performed on a core of intact saprolite where physical structure was preserved. An unsaturated flow setup was modified with the intent of allowing the extraction under two pore tensions, 15 and 0 cm of water, although a malfunctioning vacuum regulator made this more difficult than anticipated. Approximately 85% of the oxalate-extractable Fe was contained within the finer pore domain (matrix potential larger than 15 cm). Less than 15.5% of the extracted Fe mass (an upper bound) was present in domains of pore tension less than15 cm. To the extent that Fe(III) oxides play an important role in contaminant biogeochemistry and solute transport, their distribution in structured subsurface media is critical to the understanding of these processes.     

A microscale three-dimensional urban energy balance model for studying surface temperatures

A microscale three-dimensional (3-D) urban energy balance model, Temperatures of Urban Facets in 3-D (TUF-3D), is developed to predict urban surface temperatures for a variety of surface geometries and properties, weather conditions, and solar angles. The surface is composed of plane-parallel facets: roofs, walls, and streets, which are further sub-divided into identical square patches, resulting in a 3-D raster-type model geometry. The model code is structured into radiation, conduction and convection sub-models. The radiation sub-model uses the radiosity approach and accounts for multiple reflections and shading of direct solar radiation. Conduction is solved by finite differencing of the heat conduction equation, and convection is modelled by empirically relating patch heat transfer coefficients to the momentum forcing and the building morphology. The radiation and conduction sub-models are tested individually against measurements, and the complete model is tested against full-scale urban surface temperature and energy balance observations. Modelled surface temperatures perform well at both the facet-average and the sub-facet scales given the precision of the observations and the uncertainties in the model inputs. The model has several potential applications, such as the calculation of radiative loads, and the investigation of effective thermal anisotropy (when combined with a sensor-view model).     

Numerical Method for Conditional Simulation of Levy Random Fields

Stochastic simulations of subsurface heterogeneity require accurate statistical models for spatial fluctuations. Incremental values in subsurface properties were shown previously to be approximated accurately by Levy distributions in the center and in the start of the tails of the distribution. New simulation methods utilizing these observations have been developed. Multivariate Levy distributions are used to model the multipoint joint probability density. Explicit bounds on the simulated variables prevent nonphysical extreme values and introduce a cutoff in the tails of the distribution of increments. Long-range spatial dependence is introduced through off-diagonal terms in the Levy association matrix, which is decomposed to yield a maximum likelihood type estimate at unobserved locations. This procedure reduces to a known interpolation formula developed for Gaussian fractal fields in the situation of two control points. The conditional density is not univariate Levy and is not available in closed form, but can be constructed numerically. Sequential simulation algorithms utilizing the numerically constructed conditional density successfully reproduce the desired statistical properties in simulations.     

“Extreme boiling” model for variable salinity of the Hokko low-sulfidation epithermal Au prospect, southwestern Hokkaido, Japan

The Hokko prospect is located in the Minamikayabe area southwestern Hokkaido, Japan, where gold-bearing quartz veins of Pliocene age are exposed at the surface. The alteration mineral assemblage is typical of low-sulfidation epithermal systems, with the quartz veins associated with adularia alteration overprinted on Late Miocene propylitic alteration. Fluid inclusion studies of the vein quartz reveal mean homogenization temperatures of approximately 220 °C, and the co-existence of low-salinity (<2 wt.% NaCl equivalent) and moderate salinity (2 to 12 wt.% NaCl equivalent) fluid inclusions within the same veins. The moderate salinity fluid inclusions (2–12 wt.% NaCl equivalent) typically have relatively low homogenization temperatures between 150° to 200 °C. The results obtained from stable isotope analysis of  δ¹⁸O in quartz vein material showed a gradual decrease in  δ¹⁸O signatures with increasing depth. The majority of the samples have calculated fluid source signatures (δ¹⁸O_H2O) between −8.0 and −10.0‰, but there is a significant change in the composition above 185 m drill depth. The shallower samples in particular show a wide range of oxygen isotope signatures that are associated with the moderate salinity fluid inclusions. We interpret that low-salinity inclusions within the Hokko system represent the composition of the liquid phase of the fluid, before boiling, and that the moderate-salinity inclusions are representative of the residual liquid phase, after extensive non-adiabatic boiling and vapor loss in an open system. This mechanism resulted in the entrapment of fluids with variable salinities at the same time, and in close proximity to each other. This is also reflected in the  δ¹⁸O_H2O values which become more variable and heavier where the moderate-salinity inclusions occur. Deposition of ore minerals within the Hokko vein system also occurred at this time as a result of boiling and gas loss. Received: 30 May 1997 / Accepted: 6 January 1998