Effect of element size on the static finite element analysis of steep slopes

The accuracy of the computed stress distribution near the free surface of vertical slopes was evaluated in this study as a function of the element size, including aspect ratio. To accomplish this objective, a parametric study was carried out comparing stresses computed using the finite element method (FEM) to those obtained from a physical model composed of photoelastic material. The results of the study indicate a reasonable agreement between a gelatin model and the FEM model for shear stresses, and an overall good agreement between the two models for the principal stresses. For stresses along the top of the slope, the height of the element tends to be more important than width or aspect ratio, at least for aspect ratios up to 4. In all cases, the greatest difference between the two models occurs in the vicinity of the slope. Specifically, if H is defined as the slope height, an element height of H/10 appears to be adequate for the study of stresses deep within the slope, such as for typical embankment analyses. However, for cases where tensile stresses in the vicinity of the slope face which are critical, such as for the stability analysis of steep slopes, element heights as small as H/32, or higher‐order elements, are necessary. Copyright © 2001 John Wiley & Sons, Ltd.     

Simulation of double cold cores of the 35°N section in the Yellow Sea with a wave-tide-circulation coupled model

Based on the MASNUM wave-tide-circulation coupled numerical model, the temperature structure along 35°N in the Yellow Sea was simulated and compared with the observations. One of the notable features of the temperature structure along 35°N section is the double cold cores phenomena during spring and summer. The double cold cores refer to the two cold water centers located near 122°E and 125°E from the depth of 30m to bottom. The formation, maintenance and disappearance of the double cold cores are discussed. At least two reasons make the temperature in the center (near 123°E) of the section higher than that near the west and east shores in winter. One reason is that the water there is deeper than the west and east sides so its heat content is higher. The other is invasion of the warm water brought by the Yellow Sea Warm Current (YSWC) during winter. This temperature pattern of the lower layer (from 30m to bottom) is maintained through spring and summer when the upper layer (0 to 30m) is heated and strong thermocline is formed. Large zonal span of the 35°N section (about 600 km) makes the cold cores have more opportunity to survive. The double cold cores phenomena disappears in early autumn when the west cold core vanishes first with the dropping of the thermocline position. Supported by the National Basic Research Program of China (No. G1999043809) and the National Science Foundation of China (No. 49736190).     

Technique for Controlling Spread of Limnotic Oncomelania

Schistosomiasis is a parasitic disease mostly found in areas along the Changjiang River of China. The disease is spread solely through an intermediary named oncomelania, so its spread of schistosomiasis can be controlled by properly designing water intakes which prevent oncomelania from entering farming land or residential areas. This paper reports a successful design process and a new oncomelania-free intake device. The design of the new intake is based on a sound research program in which extensive experimental studies were carried out to gain knowledge of oncomelania eco-hydraulic behavior and detailed flow field information through CFD simulation.     

Report on Pontoniinae shrimps （Crustacea：Decapoda）collected by Joint Chinese—German Marine Biology Expeditions to Hainan lsland ,South China Sea：Ⅱ.Harpiliopsis,Ischnopontonia,Jocaste,Palae—mone

The present paper reports 9 species of pontoniine shrimps collected from Hainan IS-land ,South China Sea ,by the Joint Chinese-German Marine Biology Expeditions,in which Peri-climenaeus arabicus (Calman,1939) and Periclimenaeus hecate (Nobili,1904) are recorded for the first time from Hainan Island.     

APPLICATION OF GEOGRAPHICAL PARAMETER DATABASE TO ESTABLISHMENT OF UNIT POPULATION DATABASE

Now GIS is turning into a good tool in handling geographical, economical, and population data, so we can obtain more and more information from these data. On the other hand, in some cases, for a calamity, such as hurricane, earthquake, flood, drought etc., or a decision-making, such as setting up a broadcasting transmitter, building a chemical plant etc., we have to evaluate the total population in the region influenced by a calamity or a project. In this paper, a method is put forward to evaluate the population in such special region. Through exploring the correlation of geographical parameters and the distribution of people in the same region by means of quantitative analysis and qualitative analysis, unit population database (1km× 1km) is established. In this way, estimating the number of people in a special region is capable by adding up the population in every grid involved in this region boundary. The geographical parameters are obtained from topographic database and DEM database on the scale of     

EMERGY ANALYSIS OF GRAIN PRODUCTION SYSTEM IN JIANGSU AND SHAANXI PROVINCES

Efficiency and sustainability of grain production are now important in China. In this study, the grain production systems of Jiangsu and Shaanxi Provinces were compared, to analyze their efficiency and sustainability in terms of utilization of natural resources, inputs of purchased energy and materials, and outputs. Flows of energy and materials between environment and human society were identified, and the natural and human work involved in generating inputs as materials or energy were valued in terms of equivalent amount of solar energy required for their production using emergy method. The results showed environmental resources were continually playing a less important role in the systems, when inorganic subsidiary emergy inputs increased drastically while organic ones decreased or increased little. Deterioration of input emergy structure affected the systems‘ efficiency and sustainability, resulting in emergy investment ratios and environmental loading ratios increasing while yield ratios and sustainability indices decreasing. In general, efficiency and sustainability of grain production in Jiangsu are worse than those in Shaanxi. This analysis also suggested that inorganic subsidiary emergy should be introduced properly, and peasants in Jiangsu should utilize natural conditions wisely while those in Shaanxi pay enough attention to soil and surface water conservation.     

CORRESPONDENCE ANALYSIS ON IMAGES OF JIANGXI PROVINCE AS A TOURIST DESTINATION

1IN T R O D U C T IO NAn image isa setofbelief,s ideasand impressionsthatapersonholdsaboutan object(KOTLER,1991).Similar-lydefinitionistheimage of a destinationas thesum ofbelief,sideasand impressionsthatpeoplehave ofa placeor destination(CROMPTON,1979;KO…     

Oxygen isotopic compositions and origins of calcium‐aluminum‐rich inclusions and chondrules

Abstract— Primary minerals in calcium‐aluminum‐rich inclusions (CAIs), Al‐rich and ferromagnesian chondrules in each chondrite group have δ¹⁸O values that typically range from ?50 to +5%0. Neglecting effects due to minor mass fractionations, the oxygen isotopic data for each chondrite group and for micrometeorites define lines on the three‐isotope plot with slopes of 1.01 ± 0.06 and intercepts of ?2 ± 1. This suggests that the same kind of nebular process produced the ¹⁶O variations among chondrules and CAIs in all groups. Chemical and isotopic properties of some CAIs and chondrules strongly suggest that they formed from solar nebula condensates. This is incompatible with the existing two‐component model for oxygen isotopes in which chondrules and CAIs were derived from heated and melted ¹⁶O‐rich presolar dust that exchanged oxygen with ¹⁶O‐poor nebular gas. Some FUN CAIs (inclusions with isotope anomalies due to fractionation and unknown nuclear effects) have chemical and isotopic compositions indicating they are evaporative residues of presolar material, which is incompatible with ¹⁶O fractionation during mass‐independent gas phase reactions in the solar nebula. There is only one plausible reason why solar nebula condensates and evaporative residues of presolar materials are both enriched in ¹⁶O. Condensation must have occurred in a nebular region where the oxygen was largely derived from evaporated ¹⁶O‐rich dust. A simple model suggests that dust was enriched (or gas was depleted) relative to cosmic proportions by factors of ～10 to >50 prior to condensation for most CAIs and factors of 1–5 for chondrule precursor material. We infer that dust‐gas fractionation prior to evaporation and condensation was more important in establishing the oxygen isotopic composition of CAIs and chondrules than any subsequent exchange with nebular gases. Dust‐gas fractionation may have occurred near the inner edge of the disk where nebular gases accreted into the protosun and Shu and colleagues suggest that CAIs formed.