Analysis of an illustrative interaction between structural features and earthworm populations in Brazilian ferralsols

Ferralsols are characterized by poorly-defined horizons, weak macrostructure and strong development of a fine granular structure comprising subangular micro-aggregates. In this study, the morphological and physical modifications caused by earthworm activity in a clayey ferralsol were analysed. After describing soil structures, undisturbed samples were taken for evaluating aggregates and determining clod bulk density and particle density. Soil water retention properties were measured and an inventory of soil invertebrate macrofauna was created. The structural and porous transformations were due to aggregates created by earthworm activity. Changes in bulk density can be associated with pore modifications caused by a change in the proportions of aggregate types, and a notable reduction of total porosity was measured, tending to increase soil volume with dense aggregates. Structural modifications affected the topsoil down to 0.5 m and water retention between −1 and −33 kPa, the principal water compartment of these soils.     

Relationship between hydrogeological parameters for data-scarce regions: the case of the Araripe sedimentary basin, Brazil

This paper applies and validates a method for generating spatially distributed hydraulic conductivity (k) based on the specific capacity (Q _s) for data-scarce regions. This method has been applied to the Araripe sedimentary basin, Brazil, and consists of four steps: (1) selection of (32) wells for which both k and Q _s data are available; (2) estimation of k as a function of Q _s for the (128) wells for which only specific capacity data are available; (3) spatial distribution of k using the kriging geostatistical tool; (4) validation of the method, using (17) representative wells with k measured data. The equation relating k and Q _s showed a statistically significant linear relationship (R = 0.93), from which a database has been generated using kriging with the spherical model. The results showed a calibration coefficient of Nash and Sutcliffe (NS) of 0.54 and moderate spatial dependence ratio of 69 %. The validation process provided only a moderate efficiency (NS = 0.22), possibly due to the geological complexity of the focus system. Despite its limitations, the method indicates the possibility of application of ordinary kriging to generate reliable data from auxiliary variables, especially for the water management of data-scarce areas.     

Numerical study on the effect of submerged depth on the horizontal plate wave energy converter

The growing search for clean and renewable energy sources has given rise to the studies of exploring sea wave energy. This paper is concerned with the numerical evaluation of the main operational principle of a submerged plate employed for the conversion of wave energy into electrical one. The numerical model used to solve the conservation equations of mass, momentum and transport of volume fraction is based on the finite volume method （FVM）. In order to tackle with the flow of mixture of air-water and its interaction with the device, the multiphase model volume of fluid （VOF） is employed. The purpose of this study is the evaluation of a numerical model for improvement of the knowledge about the submerged plate wave energy converter, as well as the investigation of the effect of the distance from the plate to the bottom of the sea （HP） on the performance of the converter. The simulations for several distances of the plate from the seabed show that the optimal efficiency is 64%, which is obtained for HP=0.53 m （88% of the depth）. This efficiency is 17% larger than that found in the worst case （HP=0.46 m, 77% of the depth）.     

Optical dating of clastic deposits generated by an extreme marine coastal flood: The 1755 tsunami deposits in the Algarve (Portugal)

Identification of past tsunamis is important for risk assessment and management of coastal areas. Obtaining accurate and precise ages of sediments originating from such extreme marine coastal floods is crucial for a reliable estimation of the recurrence interval of these often devastating events. We present here the results of quartz optical dating and ¹⁴C dating of two sites (Boca do Rio and Martinhal) on the Algarve coast (southern Portugal). These sites contain deposits of the great tsunami of November 1, 1755. The sections were described using sedimentological techniques; at both sites tsunami-laid sands and gravels were identified, intercalated between estuarine muds. Quartz luminescence ages from these sedimentary successions were derived using standard SAR-OSL dating using multi-grain sub-samples. A multiple sampling strategy was employed with several samples taken from the AD 1755 tsunami deposit and from the sediments bracketing the tsunami layer. Our SAR-OSL protocol was shown to be appropriate using dose recovery measurements (measured/given dose ratio of 1.004 ± 0.007, n = 165). The several OSL ages from the 1755 tsunamigenic deposits are internally reproducible but yield age overestimates of between 20 and 125% (60–310 years respectively); this is in agreement with values reported in the literature for similar deposits. The age overestimation of the tsunami-laid sands is presumably due to the rapid erosion and deposition of older sediments, with insufficient light exposure for complete bleaching during the tsunami event itself. The absence of significant bleaching during the tsunami is also suggested by the shape of the dose distributions based on sub-samples made up of only about 100 grains. Analysis of the distributions with the minimum-age model seems to yield the expected age for two of the three distributions. It is important to note that age offsets of a few tens of years to a few hundred years rapidly become insignificant when dating older (>1 to few ka) tsunami layers.     

Redatuming Operators Analysis in Homogeneous Media

A redatuming operation is used to simulate the acquisition of data in new levels, avoiding distortions produced by near-surface irregularities related to either geometric or material property heterogeneities. In this work, the application of the true-amplitude Kirchhoff redatuming (TAKR) operator on homogeneous media is compared with conventional Kirchhoff redatuming (KR) operator restricted to the zero-offset case. The TAKR and the KR operators are analytically and numerically compared in order to verify their impacts on the data at a new level. Analyses of amplitude and velocity sensitivity of the TAKR and KR were performed: one concerning the difference between the weight functions and the other related to the velocity variation. The comparisons between operators were performed using numerical examples. The feasibility of the KR and TAKR operators was demonstrated not only kinematically but also dynamically for their purposes. In other words, one preserves amplitude (KR), and the other corrects the amplitude (TAKR). In the end, we applied the operators to a GPR data set.     

Determination of O3-, CO- and PM10-transport in the metropolitan area of São Paulo, Brazil through synoptic-scale analysis of back trajectories

Summary This study is aimed to qualitatively analyze the impact of remote sources on air pollution in the Metropolitan Area of S?o Paulo (MASP). Air-mass back trajectories from June to August of 1999 were calculated using a three-dimensional kinematic trajectory model and grouped into trajectory clusters. Correlations of individual trajectory clusters with O₃, CO and PM₁₀ concentrations were determined. In this model, trajectories were obtained using the means of the three wind velocity components (U, V and W). The three-dimensional wind field was derived from the Regional Atmospheric Modeling System, and downscaling was employed. Coarse and fine nested grids (64-km and 16-km horizontal resolution, respectively) were used. Every 12 h (at 00 and 12 UTC), a back-trajectory ensemble, using the 64-km grid, was calculated for five defined endpoints at intervals of 0.5° N, S, E and W of the MASP (λ = 23° 33′S, ϕ = 46° 45′W), that last endpoint being centered in the MASP. To analyze cluster trajectories, the five trajectory ensembles from each day were allocated into one of four clusters (northeast, southeast, southwest or northwest quadrant) based on the origin of the trajectory over 4 days. Days on which all five trajectories originated from the same quadrant were classified as “core” days. Core day concentrations of CO, O₃ and PM₁₀ during the study period were evaluated. The results show that, during the study period, air-mass back trajectories in the MASP originated from all four quadrants: northeast (32%), southeast (12%), southwest (19%) and northwest (37%). Our analysis of back-trajectory clusters in the MASP suggests a transport to ambient air of O₃ precursors and O₃ from the northeast region, which is associated with agricultural activities involving biomass burning.     

Environmental and biological controls on elemental (Mg/Ca, Sr/Ca and Mn/Ca) ratios in shells of the king scallop Pecten maximus

The relationship between potential elemental proxies (Mg/Ca, Sr/Ca and Mn/Ca ratios) and environmental factors was investigated for the bivalve Pecten maximus in a detailed field study undertaken in the Menai Strait, Wales, U.K. An age model constructed for each shell by comparison of measured and predicted oxygen-isotope ratios allowed comparison on a calendar time scale of shell elemental data with environmental variables, as well as estimation of shell growth rates. The seasonal variation of shell Mn/Ca ratios followed a similar pattern to one previously described for dissolved Mn²⁺ in the Menai Strait, although further calibration work is needed to validate such a relationship. Shell Sr/Ca ratios unexpectedly were found to co-vary most significantly with calcification temperature, whilst shell Mg/Ca ratios were the next most significant control. The temporal variation in the factors that control shell Sr/Ca ratios strongly suggest the former observation most likely to be the result of a secondary influence on shell Sr/Ca ratios by kinetic effects, the latter driven by seasonal variation in shell growth rate that is in turn influenced in part by seawater temperature. P. maximus shell Mg/Ca ratio to calcification temperature relationships exhibit an inverse correlation during autumn to early spring (October to March-April) and a positive correlation from late spring through summer (May-June to September). No clear explanation is evident for the former trend, but the similarity of the records from the three shells analysed indicate that it is a real signal and not a spurious observation. These observations confirm that application of the Mg/Ca proxy in P. maximus shells remains problematic, even for seasonal or absolute temperature reconstructions. For the range of calcification temperatures of 5-19 °C, our shell Mg/Ca ratios in P. maximus are approximately one-fourth those in inorganic calcite, half those in the bivalve Pinna nobilis, twice those in the bivalve Mytilus trossulus, and four to five times higher than Mg/Ca ratios in planktonic and benthonic foraminifera. Our findings further support observations that Mg/Ca ratios in bivalve shell calcite are an unreliable temperature proxy, as well as substantial taxon- and species-specific variation in Mg incorporation into bivalves and other calcifying organisms, with profound implications for the application of this geochemical proxy to the bivalve fossil record.