Thermal metamorphism of the Arunachal Himalaya, India: Raman thermometry and thermochronological constraints on the tectono-thermal evolution

Determination of the peak thermal condition is vital in order to understand tectono-thermal evolution of the Himalayan belt. The Lesser Himalayan Sequence (LHS) in the Western Arunachal Pradesh, being rich in carbonaceous material (CM), facilitates the determination of peak metamorphic temperature based on Raman spectroscopy of carbonaceous material (RSCM). In this study, we have used RSCM method of Beyssac et al. (J Metamorph Geol 20:859–871, 2002a) and Rahl et al. (Earth Planet Sci Lett 240:339–354, 2005) to estimate the thermal history of LHS and Siwalik foreland from the western Arunachal Pradesh. The study indicates that the temperature of 700–800 °C in the Greater Himalayan Sequence (GHS) decreases to 650–700 °C in the main central thrust zone (MCTZ) and decreases further to <200 °C in the Mio-Pliocene sequence of Siwaliks. The work demonstrates greater reliability of Rahl et al.’s (Earth Planet Sci Lett 240:339–354, 2005) RSCM method for temperatures >600 and <340 °C. We show that the higher and lower zones of Bomdila Gneiss (BG) experienced temperature of ~600 °C and exhumed at different stages along the Bomdila Thrust (BT) and Upper Main Boundary Thrust (U.MBT). Pyrolysis analysis of the CM together with the Fission Track ages from upper Siwaliks corroborates the RSCM thermometry estimate of ~240 °C. The results indicate that the Permian sequence north of Lower MBT was deposited at greater depths (>12 km) than the upper Siwalik sediments to its south at depths <8 km before they were exhumed. The ⁴⁰Ar/³⁹Ar ages suggest that the upper zones of Se La evolved ~13–15 Ma. The middle zone exhumed at ~11 Ma and lower zone close to ~8 Ma indicating erosional unroofing of the MCT sheet. The footwall of MCTZ cooled between 6 and 8 Ma. Analyses of P–T path imply that LHS between MCT and U.MBT zone falls within the kyanite stability field with near isobaric condition. At higher structural level, the temperatures increase gradually with P–T conditions in the sillimanite stability field. The near isothermal (700–800 °C) condition in the GHS, isobaric condition in the MCTZ together with T–t path evidence of GHS that experienced relatively longer duration of near peak temperatures and rapid cooling towards MCTZ, compares the evolution of GHS and inverted metamorphic gradient closely to channel flow predictions.     

Uranium (-nickel-cobalt-molybdenum) mineralization along the Singhbhum copper belt,India, and the problem of ore genesis

Uranium mineralization is present at many places along the 200 km long Singhbhum copper belt, but the mineralization is relatively concentrated at the central part of it. The belt is characterized by many shear zone features, such as mylonites, phyllonites, and L-S type of structures and of course, copious metasomatism. Country rocks are basic schists, metapelites, quartzose rocks and albite schist/gneiss (Soda Granite). Orebodies are sheet-like, conformable with the pervasive planar structures in the host rocks. No pronounced wall rock alteration accompanied the mineralization. Grade of the ore is low (<0.1% U₃O₈). The principal uraniferous mineral uraninite occurs as dissemination. Other uranium-bearing minerals include pitchblende, allanite, xenotime, davidite, clarkeite, autunite (-metaautunite), torbernite, schoepite (-metaschoepite) and uranophane. Uranium is also present in a number of refractory phases either as inclusion of uraninite or in the crystal structure. Additionally, nickel, cobalt and molybdenum are present at Jaduguda-Bhatin in the form of millerite, gersdorffite, melonite, nickel-bearing pyrite, molybdenite etc. Dominance of uraninite over pitchblende and the larger cell-edge of uraninite, development of hematite-bearing quartz and Na-oligoclase at places in the ore zone, association of uranium mineralization with Ni-Co-Mo(-S-As) mineralization at Jaduguda-Bhatin and continuation of the orebodies to considerable depths, suggest that the uranium mineralization along the Singhbhum belt belongs to moderate to high temperature vein type. The age obtained by Pb²⁰⁷/Pb²⁰⁶ ratio and the concordia method suggest that the uranium mineralization in Singhbhum took place 1500–1600 Ma ago and this age is not far different from the age of formation of uranium-vein deposits in many other Precambrian shields of the world. The following two mechanisms of the formation of the deposits are discussed: 1) uranium precipitated in the Dhanjori basal sediments was mobilized during deformation and metamorphism into ore deposits, 2) the hydrodynamic system that leached out copper from the metabasic rocks to form the copper deposits at an earlier stage, could, in one of the oxidised pulses leach out uranium from the basal sediments and precipitate it in the favourable situations. Subsequent small-scale redistribution is possible. Constituents of the Ni-Co-(-S-As) mineralization appear to have been contributed by the volcanic-sedimentary pile.     

Geologic setting,genesis and transformation of sulfide deposits in the northern part of Khetri copper belt,Rajasthan, India — an outline

The present study is confined to the northern part of the Khetri copper belt that extends for about 100 km in northern Rajasthan. Mineralization is more or less strata-bound and is confined to the garnetiferous chlorite schist and banded amphibolite quartzite, occurring towards the middle of the Proterozoic Delhi Supergroup. Preserved sedimentary features and re-estimation of the composition of the pre-metamorphic rocks suggest that the latter were deposited in shallow marine environment characterized by tidal activity. Cordierite-orthoamphibole-cummingtonite rock occurring in the neighbourhood of the ores is discussed, and is suggested to be isochemically metamorphosed sediment. The rocks together with the ores were deformed in two phases and metamorphosed in two progressive and one retrogressive events of metamorphism. Study of the host rocks suggests that the maximum temperature and pressure attained during metamorphism are respectively 550–600°C and < 5.5 kb. Principal ore minerals in Madan Kudan are chalcopyrite, pyrrhotite, pyrite and locally magnetite. In Kolihan these are chalcophyrite, pyrrhotite and cubanite. Subordinate phases are sphalerite, ilmenite, arsenopyrite, mackinawite, molybdenite, cobaltite and pentlandite. The last two are very rare. Gangue minerals comprise quartz, chlorite, garnet, amphiboles, biotite, scapolite, plagioclase and graphite. The ores are metamorphosed at temperatures > 491°C. Sulfide assemblages are explained in terms of f_{S 2} during metamorphism. Co-folding of the ore zone with the host rocks, confinement of the ores to the carbonaceous pelites or semi-pelitic rocks, strata-bound and locally even stratiform nature of the orebodies, lack of finite wall rock alteration, metamorphism of the ores in the thermal range similar to that for the host rocks, absence of spatial and temporal relationship with the granitic rocks of the region led the authors to conclude that the entire mineralization was originally sedimentary-diagenetic. Any loss of primitive features and development of incongruency are due to subsequent deformation and metamorphism to which the ores and their hosts were together subjected.     

Palaeomonsoon and palaeoproductivity records of δ18O, δ{13}C and CaCO3 variations in the northern Indian Ocean sedimentsC and CaCO3 variations in the northern Indian Ocean sediments

δ¹⁸ O and δ¹³C of G.sacculifer have been measured in five cores from the northern Indian Ocean. In addition, high resolution analysis (1 to 2 cm) was performed on one core (SK-20-185) for both δ¹⁸O and gd¹³C in five species of planktonic foraminifera. CaCO₃ variation was measured in two cores. The results, presented here, show that

Mercury enrichments in core sediments in Hugli–Matla–Bidyadhari estuarine complex,north-eastern part of the Bay of Bengal and their ecotoxicological significance

Mercury concentrations (Hg_T) in fine-grained fraction (<63 μm) of core sediments of the Hugli–Matla–Bidyadhari estuarine complex, India were analyzed. Results revealed a wide range of spatial variations (<4–93 ng g⁻¹ dry weight) with a definite enhancement level at the lower stretch of the estuarine complex infested with mangrove plants, which might act as a sink to Hg_T. An elevated concentration of Hg was encountered in surface/subsurface layer of the core in majority of the cases resulting from physical, biogenic and postdepositional diagenetic processes that remobilized and resuspended the metal from deeper sediments. A strong positive correlation was observed between the Hg and clay fraction content of the sediments, while the correlations of Hg with Al, Fe and Mn were poor. Based on the index of geoaccumulation (I _geo) and effects range-low (ER-L) value, it is considered that the sediments are less polluted and thus there is less chance of ecotoxicological risk to organisms living in sediments.     

Saddle-shaped reticulate <Emphasis Type="Italic">Nummulites</Emphasis> from Early Oligocene rocks of Khari area,SW Kutch,India

Saddle-shaped reticulate Nummulites from the Early Oligocene rocks of Khari area, SW Kutch, India is reported here for the first time. Unusual shape of this Nummulites is due to the curved nature of the coiling plane, indicating space constrained postembryonic test growth. With regular development of chambers, septa and septal filaments, the saddle-shaped Nummulites constitutes the third morphotype of N. cf. fichteli Michelotti form A. Other morphotypes of the species reported earlier include inflated lenticular and conical tests. Multiple morphotypes of N. cf. fichteli form A indicates varied test growth in response to substrate conditions. Morphological variability exhibited by N. cf. fichteli form A from Kutch and some Early Oligocene reticulate Nummulites from the Far East are comparable. This faunal suite is morphologically distinct from the contemporary reticulate Nummulites of the European localities.     

Hydrogeological characterization of aquifer in palla flood plain of Delhi using integrated approach

The Yamuna flood plains spread across the northern part of Indian subcontinent is home to millions of people. The ever-growing population in these plains make it difficult to sustain the demand of freshwater resources. However, the productive aquifers of flood plains could provide solution for these issues. In this context, it is necessary to understand the aquifer characteristics. Thus, the paper attempts to characterize the aquifer in Palla area of the flood plain using integrated approach. Besides, grain size analysis and site-litholog study, the nature of aquifer material was also ascertained from bulk mineralogy of the sediments using X-Ray Diffraction. The aquifer parameters were estimated with help of long duration pumping test data. Moreover, the effect of pumping on salinity variation and hydrochemical facies evolution was also examined. The sand dominant, unconfined aquifer was estimated to have horizontal hydraulic conductivity in the range of 25 m/day and vertical hydraulic conductivity of 6–7 m /day. While the specific yield of the aquifer was estimated in the range of 0.07–0.08. It is observed that under conducive active flood plain environment, the given sand mineralogy at the site does not allow salinity increase in groundwater even after more than a decade of groundwater pumping. In fact, over years, hydrochemical facies have evolved towards Bicarbonate type. These things put together make the active flood plain aquifer a sustainable groundwater resource.     

Impact of horizontal resolution on prediction of tropical cyclones over Bay of Bengal using a regional weather prediction model

The present study is carried out to examine the performance of a regional atmospheric model in forecasting tropical cyclones over the Bay of Bengal and its sensitivity to horizontal resolution. Two cyclones, which formed over the Bay of Bengal during the years 1995 and 1997, are simulated using a regional weather prediction model with two horizontal resolutions of 165 km and 55 km. The model is found to perform reasonably well towards simulation of the storms. The structure, intensity and track of the cyclones are found to be better simulated by finer resolution of the model as compared to the coarse resolution. Rainfall amount and its distribution are also found to be sensitive to the model horizontal resolution. Other important fields, viz., vertical velocity, horizontal divergence and horizontal moisture flux are also found to be sensitive to model horizontal resolution and are better simulated by the model with finer horizontal grids.     

An experimental investigation to characterise soil macroporosity under different land use and land covers of northeast India

Saturated macropore flow is the dominant hydrological process in tropical and subtropical hilly watersheds of northeast India. The process of infiltration into saturated macroporous soils is primarily controlled by size, network, density, connectivity, saturation of surrounding soil matrix, and depthwise distribution of macropores. To understand the effects of local land use, land cover and management practices on soil macroporosity, colour dye infiltration experiments were conducted with ten soil columns (25 × 25 × 50 cm) collected from different watersheds of the region under similar soil and agro-climatic zones. The sampling sites included two undisturbed forested hillslopes, two conventionally cultivated paddy fields, two forest lands abandoned after Jhum cultivation, and two paddy fields, one pineapple plot and one banana plot presently under active cultivation stage of the Jhum cycle. Digital image analyses of the obtained dye patterns showed that the infiltration patterns differed significantly for different sites with varying land use, land cover, and cultivation practices. Undisturbed forest soils showed high degree of soil macroporosity throughout the soil profile, paddy fields revealed sealing of macropores at the topsoil due to hard pan formation, and Jhum cultivated plots showed disconnected subsoil macropores. The important parameters related to soil macropores such as maximum and average size of macropores, number of active macropores, and depthwise distribution of macropores were estimated to characterise the soil macroporosity for the sites. These experimentally derived quantitative data of soil macroporosity can have wide range of applications in the region such as water quality monitoring and groundwater pollution assessment due to preferential leaching of solutes and pesticides, study of soil structural properties and infiltration behaviour of soils, investigation of flash floods in rivers, and hydrological modelling of the watersheds.