Normal fault growth and linkage in the Gediz (Alaşehir) Graben,Western Turkey,revealed by transient river long‐profiles and slope‐break knickpoints

The Gediz (Ala?ehir) Graben is located in the highly tectonically active and seismogenic region of Western Turkey. The rivers upstream of the normal fault‐bounded graben each contain a non‐lithologic knickpoint, including those that drain through inferred fault segment boundaries. Knickpoint heights measured vertically from the fault scale with footwall relief and documented fault throw (vertical displacement). Consequently, we deduce these knickpoints were initiated by an increase in slip rate on the basin‐bounding fault, driven by linkage of the three main fault segments of the high‐angle graben bounding fault array. Fault interaction theory and ratios of channel steepness suggest that the slip rate enhancement factor on linkage was a factor of 3. We combine this information with geomorphic and structural constraints to estimate that linkage took place between 0.6 Ma and 1 Ma. Calculated pre‐ and post‐linkage throw rates are 0.6 and 2 mm/yr respectively. Maximum knickpoint retreat rates upstream of the faults range from 4.5 to 28 mm/yr, faster than for similar catchments upstream of normal faults in the Central Apennines and the Hatay Graben of Turkey, and implying a fluvial landscape response time of 1.6 to 2.7 Myr. We explore the relative controls of drainage area and precipitation on these retreat rates, and conclude that while climate variation and fault throw rate partially explain the variations seen, lithology remains a potentially important but poorly characterised variable. Copyright © 2016 John Wiley & Sons, Ltd.     

Delineation of flooding risk hotspots based on digital elevation model,calculated and historical flooding extents: the case of Ouagadougou

Delineation of flood risk hotspots can be considered as one of the first steps in an integrated methodology for urban flood risk management and mitigation. This paper presents a step-by-step methodology in a GIS-based framework for identifying flooding risk hotspots for residential buildings. This is done by overlaying a map of potentially flood-prone areas [estimated through the topographic wetness index (TWI)], a map of residential areas [extracted from a city-wide assessment of urban morphology types (UMT)], and a geo-spatial census dataset. The novelty of this paper consists in the fact that the flood-prone areas (the TWI thresholds) are identified through a maximum likelihood method (MLE) based both on inundation profiles calculated for a specific return period (T_R), and on information about the extent of historical flooding in the area of interest. Furthermore, Bayesian parameter updating is employed in order to estimate the TWI threshold by employing the historical extent as prior information and the inundation map for calculating the likelihood function. For different statistics of the TWI threshold, the map of potentially flood-prone areas is overlaid with the map of residential urban morphology units in order to delineate the residential flooding risk urban hotspots. Overlaying the delineated urban hotspots with geo-spatial census datasets, the number of people affected by flooding is estimated. These kind of screening procedures are particularly useful for locations where there is a lack of detailed data or where it is difficult to perform accurate flood risk assessment. In fact, an application of the proposed procedure is demonstrated for the identification of urban flooding risk hotspots in the city of Ouagadougou, capital of Burkina Faso, a city for which the observed spatial extent of a major flood event in 2009 and a calculated inundation map for a return period of 300 years are both available.     

A continuous tephrostratigraphic record from the Labrador Sea spanning the last 65 ka

Volcanic ash preserved in marine sediment sequences is key for independent synchronization of palaeoclimate records within and across different climate archives. Here we present a continuous tephrostratigraphic record from the Labrador Sea, spanning the last 65–5 ka, an area and time period that has not been investigated in detail within the established North Atlantic tephra framework. We investigated marine sediment core GS16-204-22CC for increased tephra occurrences and geochemically analysed the major element composition of tephra shards to identify their source volcano(es). In total we observed eight tephra zones, of which five concentration peaks show isochronous features that can be used as independent tie-points in future studies. The main transport mechanism of tephra shards to the site was near-instantaneous deposition by drifting of sea ice along the East Greenland Current. Our results show that the Icelandic Veidivötn volcanic system was the dominant source of tephra material, especially between late Marine Isotope Stage (MIS) 4 and early MIS 3. The Veidivötn system generated volcanic eruptions in cycles of ca. 3–5 ka. We speculate that the quantity of tephra delivered to the Labrador Sea was a result of variable Icelandic ice volume and/or changes in the transportation pathway towards the Labrador Sea.     

The fusion crust of the Winchcombe meteorite: A preserved record of atmospheric entry processes

Fusion crusts form during the atmospheric entry heating of meteorites and preserve a record of the conditions that occurred during deceleration in the atmosphere. The fusion crust of the Winchcombe meteorite closely resembles that of other stony meteorites, and in particular CM2 chondrites, since it is dominated by olivine phenocrysts set in a glassy mesostasis with magnetite, and is highly vesicular. Dehydration cracks are unusually abundant in Winchcombe. Failure of this weak layer is an additional ablation mechanism to produce large numbers of particles during deceleration, consistent with the observation of pulses of plasma in videos of the Winchcombe fireball. Calving events might provide an observable phenomenon related to meteorites that are particularly susceptible to dehydration. Oscillatory zoning is observed within olivine phenocrysts in the fusion crust, in contrast to other meteorites, perhaps owing to temperature fluctuations resulting from calving events. Magnetite monolayers are found in the crust, and have also not been previously reported, and form discontinuous strata. These features grade into magnetite rims formed on the external surface of the crust and suggest the trapping of surface magnetite by collapse of melt. Magnetite monolayers may be a feature of meteorites that undergo significant degassing. Silicate warts with dendritic textures were observed and are suggested to be droplets ablated from another stone in the shower. They, therefore, represent the first evidence for intershower transfer of ablation materials and are consistent with the other evidence in the Winchcombe meteorite for unusually intense gas loss and ablation, despite its low entry velocity.     

Compartmentalisation and groundwater–surface water interactions in a prospective shale gas basin: Assessment using variance analysis and multivariate statistics on water quality data

An environmental concern with hydraulic fracturing for shale gas is the risk of groundwater and surface water contamination. Assessing this risk partly involves the identification and understanding of groundwater–surface water interactions because potentially contaminating fluids could move from one water body to the other along hydraulic pathways. In this study, we use water quality data from a prospective shale gas basin to determine: if surface water sampling could identify groundwater compartmentalisation by low-permeability faults; and if surface waters interact with groundwater in underlying bedrock formations, thereby indicating hydraulic pathways. Variance analysis showed that bedrock geology was a significant factor influencing surface water quality, indicating regional-scale groundwater–surface water interactions despite the presence of an overlying region-wide layer of superficial deposits averaging 30–40 m thickness. We propose that surface waters interact with a weathered bedrock layer through the complex distribution of glaciofluvial sands and gravels. Principal component analysis showed that surface water compositions were constrained within groundwater end-member compositions. Surface water quality data showed no relationship with groundwater compartmentalisation known to be caused by a major basin fault. Therefore, there was no chemical evidence to suggest that deeper groundwater in this particular area of the prospective basin was reaching the surface in response to compartmentalisation. Consequently, in this case compartmentalisation does not appear to increase the risk of fracking-related contaminants reaching surface waters, although this may differ under different hydrogeological scenarios.     

DISOLV: A Python Package for the Interpretation of Borehole Dilution Tests

Single borehole dilution tests (SBDTs) are an inexpensive but effective technique for hydrogeological characterization of hard-rock aquifers. We present a freely available, easy-to-use, open-source Python package, DISOLV, for plotting, analyzing, and modeling SBDT data. DISOLV can significantly reduce the time spent interpreting field data by helping to identify flowing fractures intersecting the borehole and estimate the corresponding flow rates. DISOLV is successfully benchmarked against two analytical solutions. We also present an example application to real data collected in a borehole in a crystalline basement aquifer in southern India.     

A Genetic Programming–Based Model for Colloid Retention in Fractures

Understanding the behavior of colloids in groundwater is critical as some are pathogenic while others may facilitate or inhibit the transport of dissolved contaminants. Colloid behavior in saturated fractured aquifers is governed by the physical and chemical properties of the groundwater-particle-fracture system. The interaction between these properties is nonlinear, and there is a need for a mathematical model describing the relationship between them to advance the mechanistic understanding of colloid transport in fractures and facilitate modeling in fractured environments. This paper coupled genetic programming and linear regression within a multigene genetic programming framework to develop a robust mathematical model describing the relationship between colloid retention in fractures and the physical and chemical parameters that describe the system. The data employed for model development and validation were collected from a series of 75 laboratory-scale colloid tracer experiments conducted under a range of conditions in three laboratory-induced discrete dolomite fractures and their epoxy replicas. The model sufficiently reproduced the observed data with coefficients of determination (R²) of 0.92 and 0.80 for model development and validation, respectively. A cross-validation demonstrated the model generality to 86% of the observed data. A variance-based global sensitivity analysis confirmed that attachment is the primary retention mechanism in the systems employed in this work. The model developed in this study provides a tool describing colloid retention in factures, which furthers the understanding of groundwater-particle-fracture system conditions contributing to the retention of colloids and can aid in the design of groundwater remediation strategies and development of groundwater management plans.     

Mineralogical approaches to sourcing pipes and figurines from the eastern woodlands,U.S.A.

Provenance studies of stone artifacts often rely heavily upon chemical techniques such as neutron activation analysis. However, stone specimens with very similar chemical composition can have different mineralogies (distinctive crystalline structures as well as variations within the same mineral) that are not revealed by multielemental techniques. Because mineralogical techniques are often cheap and usually nondestructive, beginning with mineralogy allows the researcher to gain valuable information and then to be selective about how many samples are submitted for expensive and somewhat destructive chemical analysis, thus conserving both valuable samples and funds. Our University of Illinois team of archaeologists and geologists employs Portable Infrared Mineral Analyzer (PIMA) spectroscopy, X‐ray diffraction (XRD), and Sequential acid dissolution/XRD/Inductively coupled plasma (SAD‐XRD‐ICP) analyses. Two case studies of Hopewellian pipes and Mississippian figurines illustrate this mineralogical approach. The results for both studies identify sources relatively close to the sites where the artifacts were recovered: Sterling, Illinois (rather than Ohio) for the (Hopewell) pipes and Missouri (rather than Arkansas or Oklahoma) for the Cahokia figurines. © 2002 Wiley Periodicals, Inc.     

Distribution,sediment magnetism and geochemistry of the Saksunarvatn (10 180 ± 60 cal. yr BP) tephra in marine,lake, and terrestrial sediments,northwest Iceland

In 1997, seismic surveys in the troughs off northwest and north Iceland indicated the presence of a major, regional sub‐bottom reflector that can be traced over large areas of the shelf. Cores taken in 1997, and later in 1999 on the IMAGES V cruise, penetrated through the reflector. In core MD99‐2269 in Húnaflóaáll, this reflector is shown to be represented by a basaltic tephra with a geochemical signature and radiocarbon age correlative with the North Atlantic‐wide Saksunarvatn tephra. We trace this tephra throughout northwest Iceland in a series of marine and lake cores, as well as in terrestrial sediments; it forms a layer 1 to 25 cm thick of fine‐ to medium‐grained basaltic volcanic shards. The base of the tephra unit is always sharp but visual inspection and other measurements (carbonate and total organic carbon weight %) indicate a more diffuse upper boundary associated with bioturbation and with sediment reworking. Off northwest Iceland the Saksunarvatn tephra has distinct sediment magnetic properties. This is evident as a dramatic reduction in magnetic susceptibility, an increase in the frequency dependant magnetic susceptibility and ‘hard’ magnetisation in a −0.1T IRM backfield. Geochemical analyses from 11 sites indicate a tholeiitic basalt composition, similar to the geochemistry of a tephra found in the Greenland ice‐core that dates to 10 180 ± 60 cal. yr BP, and which was correlated with the 9000 ¹⁴C yr BP Saksunarvatn tephra. We present accelerator mass spectrometry ¹⁴C dates from the marine sites, which indicate that the ocean reservoir correction is close to ca. 400 yr at 9000 ¹⁴C yr BP off northwest Iceland. Copyright © 2002 John Wiley & Sons, Ltd.