Validation of Daily Amplitude of Sea Surface Temperature Evaluated with a Parametric Model Using Satellite Data

The authors have verified a regression model for the evaluation of the daily amplitude of sea surface temperature (ΔSST) proposed by Kawai and Kawamura (2002). The authors investigated the accuracy of satellite data used for the evaluation and showed that ΔSST error caused by satellite data error is less than ±0.7 K. The evaluated ΔSSTs were compared with in situ values. Its root-mean-square error is about 0.3 K or less, except for a coastal region, and it has a bias of more than +0.1 K in the tropics. This bias can be removed by considering latent heat flux. This revised version was published online in July 2006 with corrections to the Cover Date.     

Research and development of the New Generation Sea Surface Temperature for Open Ccean (NGSST-O) product and its demonstration operation

Real-time generation and distribution of the New Generation Sea Surface Temperature for Open Ocean (NGSST-O) product began in September 2003 as a demonstration operation of the Global Ocean Data Assimilation Experiment (GODAE) High-Resolution Sea Surface Temperature Pilot Project. Satellite sea surface temperature (SST) observations from infrared radiometers (AVHRR, MODIS) and a microwave radiometer (AMSR-E) are objectively merged to generate the NGSST-O product, which is a quality-controlled, cloud-free, high-spatial-resolution (0.05° gridded), wide-coverage (13–63° N, 116–166° E), daily SST digital map. The NGSST-O demonstration operation system has been developed in cooperation with the Japanese Space Agency (JAXA) and has produced six years of continuous data without gaps. Comparison to in situ SSTs measured by drifting buoys indicates that the root mean-square error of NGSST-O has been kept at approximately 0.9°C.     

Diurnal sea surface temperature variation and its impact on the atmosphere and ocean: A review

The importance of the diurnal variability of sea surface temperature (SST) on air-sea interaction is now being increasingly recognized. This review synthesizes knowledge of the diurnal SST variation, mainly paying attention to its impact on the atmosphere or the ocean. Diurnal SST warming becomes evident when the surface wind is weak and insolation is strong. Recent observations using satellite data and advanced instruments have revealed that a large diurnal SST rise occurs over wide areas in a specific season, and in an extreme case the diurnal amplitude of SST exceeds 5 K. The large diurnal SST rise can lead to an increase in net surface heat flux from the ocean of 50–60 Wm⁻² in the daytime. The temporal mean of the increase exceeds 10 Wm⁻², which will be non-negligible for the atmosphere. A few numerical experiments have indicated that the diurnal SST variation can modify atmospheric properties over the Pacific warm pool or a coastal sea, but the processes underlying the modification have not yet been investigated in detail. Furthermore, it has been shown that the diurnal change of ocean mixing process near the surface must be considered correctly in order to reproduce SST variations on an intraseasonal scale in a numerical model. The variation of mixed-layer properties on the daily scale is nonlinearly related to the intraseasonal variability. The mixed-layer deepening/shoaling process on the daily scale will also be related to biological and material circulation processes.     

A 27-kyr record of environmental change in central Asia inferred from the sediment record of Lake Hovsgol,northwest Mongolia

Geochemistry of a sediment core from Lake Hovsgol, northwest Mongolia provides a continuous, 27-kyr history of the response of the lake and the surrounding catchment to climate change. Principle component (PC) analysis of 19 major and trace elements, total inorganic carbon (TIC), and total organic carbon (TOC) in the bulk sediment samples revealed that the 21 chemical components can be grouped into four assemblages—group-1: Na, Mg, Ca, Sr, and TIC, hosted in carbonate minerals (calcite, dolomite, and magnesian calcite); group-2: Ni, Cu, and Zn, recognized as biophilic trace metals, and TOC; group-3: Al, K, Ti, V, Fe, Rb, Cs, Ba, and Pb, composed of rock-forming minerals; and group-4: Cr, Mn, and As, sensitive to the redox condition of the sediment. The four element assemblages originated from three relevant processes. Group-1 and group-2 components are authigenic products and comprise the end member on the PC-1 score, whose variation reflects changes in the water volume, i.e. the balance between precipitation and evaporation (P/E). Group-3 components from detrital materials of the catchment contribute to the PC-2 score, whose variability indicates erosion/weathering intensity in the drainage basin, which might be controlled by the amount of vegetation cover associated with moisture change. The group-4 components of redox-sensitive elements contribute to the PC-3 score and are not an end member because of their small amount. The first two PC scores suggest a sequential record of paleo-moisture evolution in central Asia. The P/E balance in the Lake Hovsgol region, inferred from the PC-1 score, gradually increased during the glacial/interglacial transition. This resembles climate change of the North Atlantic region on the glacial–interglacial scale, but does not reflect the abrupt climate shifts such as the warm Bølling-Allerød and the cold Younger Dryas of the North Atlantic on the millennial scale. A periodic variation of ~8.7 kyr was observed in the PC-2 score profile of detrital input to Lake Hovsgol over the last glacial and Holocene. The decrease in detrital input coincided with the copious supply of moisture from the Asian monsoon regime and the North Atlantic westerly winds to the Baikal drainage basin, which includes Lake Hovsgol. Our geochemical records from Lake Hovsgol demonstrate that the climate system of interior continental Asia was strongly influenced by change on both Milankovitch and sub-Milankovitch scales.     

A Simple Energy Balance Model for Regular Building Arrays

A simple urban energy balance model for mesoscale simulations (SUMM) was tested using results from an outdoor scale-model experiment. The model geometry is assumed to be an infinitely extended regular array of uniform buildings, each of which is composed of six faces (roof, floor, and four vertical walls). The SUMM explicitly considers the three dimensionality of surface geometry and theoretically predicts the energy balance at each face without time-consuming iterations. The SUMM was compared with outdoor scale-model experiments. The simulated energy balance and surface temperatures agree well with the values measured on a reduced-scale hardware model corresponding to the numerical model geometry.     

Theoretical Evaluation of the Mechanical Behavior of Unsaturated Soils

An evaluation method for the mechanical behavior of unsaturated soils is studied in this paper. Although the mechanical behavior of unsaturated soils is complicated, a simple modeling is preferable in practice. This is because the soil properties are not homogeneous and ground data is limited when structures are being designed. In addition, in order to evaluate the reliability of the design, the physical meanings of the parameters applied in the prediction model should be clear. Firstly, the authors study the relationship between compaction curves and compression indexes in the unsaturated state that is used in the proposed constitutive model. Based on the constitutive model, the stress paths for constant volume shear tests are formulated under a constant void ratio condition and the stress paths for undrained shear tests are calculated under a constant water content condition. In the case of unsaturated specimens, the volume of these specimens changes with the shear deformation and the stress paths depend on the initial degree of saturation. The results of the calculation qualitatively describe the test results by considering the changes in effective confining pressure in the undrained condition and the water retention curves.     

Laboratory Hydraulic Testing in Unsaturated Soils

This paper synthesizes the state-of-the art of the various laboratory testing techniques presently available for measuring the water hydraulic constitutive functions of unsaturated soils. Emphasis is on the laboratory testing techniques for measuring the soil–water retention curves and the water hydraulic conductivity functions of unsaturated soils. The significant recent advances in the investigation of the hydraulic behaviour of unsaturated swelling soils, are also presented. Comprehensive recent references on each measurement method are listed and discussed.     

Large P–T gap between Ballantrae blueschist/garnet pyroxenite and surrounding ophiolite, southern Scotland, UK: Diapiric exhumation of a Caledonian serpentinite mélange

The Ballantrae ophiolite in southern Scotland includes a NEE–SWW-trending serpentinite mélange that contains blocks of mafic blueschist and high-pressure, granulite facies, metapyroxenite (Sm–Nd metamorphic age: 576 ± 32 and 505 ± 11 Ma). Tectonic blocks of mafic schist are less than 3 × 3 m in size, and have greenschist, blueschist or epidote amphibolite facies assemblages corresponding to the high-pressure intermediate-type metamorphic facies series.Adjacent rocks of the serpentinite mélange are hydrothermally-altered MORB-like ophiolitic basalt (prehnite–pumpellyite facies), dolerite (actinolite–oligoclase sub-facies) and gabbro (amphibolite facies), all with assemblages that are diagnostic of the low-pressure metamorphic facies series.The difference in metamorphic facies series and parageneses of minerals between the high-pressure mafic blocks and the adjacent, low-pressure ophiolitic meta-basic rocks suggests that the former were exhumed from > 25 km depth within a cold subducted slab, and were juxtaposed with the latter, the bottom of a MORB-like ophiolite in the hanging wall of a trench. An ENE–WSW-trending, 501 ± 12 Ma volcanic arc belt extends for 3 km south of the serpentinite mélange. We suggest that ridge subduction associated with a slab window created arc-related gabbro (483 ± 4 Ma) at Byne Hill and within-plate gabbro (487 ± 8 Ma) at Millenderdale. Final continental collision created the duplex structure of the Ballantrae complex that includes the HP blocks and serpentinite mélange. These relations define diapiric exhumation in the Caledonian orogen of SW Scotland.     

Photometric observations of 107P/Wilson-Harrington

We present lightcurve observations and multiband photometry for 107P/Wilson-Harrington using five small- and medium-sized telescopes. The lightcurve has shown a periodicity of 0.2979 day (7.15 h) and 0.0993 day (2.38 h), which has a commensurability of 3:1. The physical properties of the lightcurve indicate two models: (1) 107P/Wilson-Harrington is a tumbling object with a sidereal rotation period of 0.2979 day and a precession period of 0.0993 day. The shape has a long axis mode (LAM) of L₁:L₂:L₃ = 1.0:1.0:1.6. The direction of the total rotational angular momentum is around λ = 310°, β = −10°, or λ = 132°, β = −17°. The nutation angle is approximately constant at 65°. (2) 107P/Wilson-Harrington is not a tumbler. The sidereal rotation period is 0.2979 day. The shape is nearly spherical but slightly hexagonal with a short axis mode (SAM) of L₁:L₂:L₃ = 1.5:1.5:1.0. The pole orientation is around λ = 330°, β = −27°. In addition, the model includes the possibility of binary hosting. For both models, the sense of rotation is retrograde. Furthermore, multiband photometry indicates that the taxonomy class of 107P/Wilson-Harrington is C-type. No clear rotational color variations are confirmed on the surface.