Environmental issues with Australian ports

Ports and shipping operations are under increased environmental scrutiny in Australia, particularly as so many of Australia's ports and shipping routes are located in or near major environmentally sensitive areas. The environmental risks involved have been highlighted by the publicity given to shipping accidents. Environmental regulations over aspects of port operations, including ballast water management, dredge spoil and waste reception, are also becoming stricter. While port authorities have adopted stringent environmental guidelines, they remain concerned that the full impact of proposed new environmental regulations on maritime industry may not be fully understood. This paper discusses some of the issues involved with achieving a balance between environmental protection and the need to recognise the importance of seaborne trade to Australia and to maintain Australia's competitiveness in international trade.     

Paragenesis of “box-work geodes”, Tampa Bay, Florida

An unusual suite of silicified rocks was excavated during a recent harbour-deepening project in Tampa Bay, Florida. These rocks, which we have termed “box-work geodes”, are composed of convoluted, intersecting silica walls enclosing cavities which are either voids or filled with relatively pure monoclinic palygorskite. The “box-work geodes” are interpreted as having formed in shallow lagoonal environments, similar to the Coorong Lagoon of South Australia. Synaeresis of syngenetic palygorskite was followed by opal deposition and case hardening of the material. Subsequent chemical deposition of chalcedony, megacrystalline quartz, barite, and calcite on the void facing walls indicates an open chemical system.

The existence of opal saturated lagoons, as inferred from the “box-work geodes”, suggests that much of the replacement chert, porcelanite, and silicified fossils in the Tertiary deposits of peninsular Florida formed in the shallow subsurface. Subsequent weathering of carbonates and clays not encapsulated in the box works has resulted in formation of a green montmorillonite residual clay bed.     

Alteration of hydrological processes and streamflow with juniper (Juniperus virginiana) encroachment in a mesic grassland catchment

To understand the effect of woody plant encroachment on hydrological processes of mesic grasslands, we quantified infiltration capacity in situ, the temporal changes in soil water storage, and streamflow of a grassland catchment and a catchment heavily encroached by juniper (Juniperus virginiana, eastern redcedar) in previously cultivated, non‐karst substrate grasslands in north‐central Oklahoma for 3 years. The initial and steady‐state infiltration rates under the juniper canopy were nearly triple to that of the grassland catchment and were intermediate in the intercanopy spaces within the encroached catchment. Soil water content and soil water storage on the encroached catchment were generally lower than on the grassland catchment, especially when preceding the seasons of peak rainfall in spring and fall. Frequency and magnitude of streamflow events were reduced in the encroached catchment. Annual runoff coefficients for the encroached catchment averaged 2.1%, in contrast to 10.6% for the grassland catchment. Annual streamflow duration ranged from 80 to 250 h for the encroached catchment compared with 600 to 800 h for the grassland catchment. Our results showed that the encroachment of juniper into previously cultivated mesic grasslands fundamentally alters catchment hydrological function. Rapid transformation of mesic grassland to a woodland state with juniper encroachment, if not confined, has the potential to drastically reduce soil water, streamflow and flow duration of ephemeral streams in the Southern Great Plains. Copyright © 2013 John Wiley & Sons, Ltd.     

The Jurassic Coast Story Book: An approach to geoheritage interpretation from the Jurassic Coast World Heritage Site

The World Heritage status of the Jurassic Coast has important implications for how the geoheritage of the site is communicated to audiences. UNESCO defines World Heritage Sites as places with Outstanding Universal Value to all people that must be preserved for future generations. Building relationships between people and place is key to conservation and on the Jurassic Coast that is delivered by providing audiences with physical, intellectual and emotional access to the Site. Heritage interpretation offers an effective way to develop these connections and create diverse ways for people to engage with the unique Earth Science stories that underpin the World Heritage Status of the Dorset and East Devon Coast. This paper reflects on the approach to interpretation taken by the Jurassic Coast Team and explores the ways in which geoheritage is a challenging subject to interpret. Practitioners on the Jurassic Coast have more recently developed an interpretive approach to help overcome these difficulties. Three categories of geoheritage stories were identified (Landscape, Cultural geology and Earth History) and three interpretive principles were devised (perspective, intimacy and imagination) as a way of scoping out a relevant emotional context for interpretive content. This approach laid the foundation for the development of a new interpretation framework for the Jurassic Coast – The Jurassic Coast Story Book, which will be subject to ongoing testing and evaluation by the new organisation leading on the protection and promotion of the Jurassic Coast World Heritage Site; Jurassic Coast Trust.     

The effects of rock uplift and rock resistance on river morphology in a subduction zone forearc,Oregon, USA

Relationships between riverbed morphology, concavity, rock type and rock uplift rate are examined to independently unravel the contribution of along-strike variations in lithology and rates of vertical deformation to the topographic relief of the Oregon coastal mountains. Lithologic control on river profile form is reflected by convexities and knickpoints in a number of longitudinal profiles and by general trends of concavity as a function of lithology. Volcanic and sedimentary rocks are the principal rock types underlying the northern Oregon Coast Ranges (between 46°30′ and 45°N) where mixed bedrock–alluvial channels dominate. Average concavity, θ, is 0·57 in this region. In the alluviated central Oregon Coast Ranges (between 45° and 44°N) values of concavity are, on average, the highest (θ = 0·82). South of 44°N, however, bedrock channels are common and θ = 0·73. Mixed bedrock–alluvial channels characterize rivers in the Klamath Mountains (from 43°N south; θ = 0·64). Rock uplift rates of ≥0·5 mm a⁻¹, mixed bedrock–alluvial channels, and concavities of 0·53–0·70 occur within the northernmost Coast Ranges and Klamath Mountains. For rivers flowing over volcanic rocks θ = 0·53, and θ = 0·72 for reaches crossing sedimentary rocks. Whereas channel type and concavity generally co-vary with lithology along much of the range, rivers between 44·5° and 43°N do not follow these trends. Concavities are generally greater than 0·70, alluvial channels are common, and river profiles lack knickpoints between 44·5° and 44°N, despite the fact that lithology is arguably invariant. Moreover, rock uplift rates in this region vary from low, ≤0·5 mm a⁻¹, to subsidence (<0 mm a⁻¹). These observations are consistent with models of transient river response to a decrease in uplift rate. Conversely, the rivers between 44° and 43°N have similar concavities and flow on the same mapped bedrock unit as the central region, but have bedrock channels and irregular longitudinal profiles, suggesting the river profiles reflect a transient response to an increase in uplift rate. If changes in rock uplift rate explain the differences in river profile form and morphology, it is unlikely that rock uplift and erosion are in steady state in the Oregon coastal mountains. Copyright © 2006 John Wiley & Sons, Ltd.     

Detection of model voids by identifying reverberation phenomena in GPR records

In order to improve the reliability of the ground penetrating radar (GPR) method in identifying subsurface sinkholes and karst cavities, laboratory investigations have been performed. The main objective of this work was to examine the relationship between horizontal/vertical voids dimensions and wavelengths of various antennas, and the corresponding GPR responses. Emphasis was given to the investigation of the factors that cause the appearance of reverberation phenomena in the signal pattern.The tests were conducted in 5 m × 10 m area by 2-m-deep trench filled with homogenous, dry sand. The voids models (empty fiberglass cylinders in diameters of 0.6 m, 1.0 m, 1.5 m and 2.4 m, with various heights) were buried vertically with their tops at depths of between 0.7 and 1.5 m. Investigations were performed for the various model conditions by towing 500, 300 and 100 MHz antennas along a pre-established grid, for the various model conditions.The GPR data collected using the 500 MHz bistatic antenna above the 1.0-m- and the 1.5-m-diameter cylinders, and using the 300 MHz bistatic antenna above the 1.5-m-diameter cylinder, confirmed the presence of a reverberation phenomenon, i.e. a strong convex signal pattern, containing a series of high amplitude extending oscillations with reduced frequency.Based on past practical GPR experience of void detection and presently obtained experimental data, two rules of thumbs may be adopted for the prediction of the appearance of resonant radar pictures:

1. The void diameter larger than the wavelength in air of the antenna used.

2. The vertical size of the empty void not significantly smaller than its horizontal dimension.

The strong reverberations generated by the inner surface of the void targets were found to approximate standing waves generated in cylindrical waveguides and waveguide resonators. The theoretical, experimental and practical results obtained concur.     

Ionospheric delay gradient model for GBAS in the Asia-Pacific region

GPS Solutions - We investigated characteristics of anomalous spatial gradients in ionospheric delay on GNSS signals in the Asia-Pacific (APAC) low-magnetic latitude region in the context of the...     

Bottom sediment contamination in the Bay of Naples,Italy

The nearshore sediments in the Bay of Naples show a buildup of organic carbon and increased levels of lead, copper and chromium as a result of discharge of domestic and industrial waste water. Twenty to twenty-five square kilometres of bottom area have been contaminated by the buildup of anoxic muds with elevated heavy metal concentrations.     

Holocene records of eolian dust deposition from high-elevation lakes in the Uinta Mountains,Utah, USA

Radiocarbon-dated sediment cores from subalpine lakes were used to investigate post-glacial dust deposition in the Uinta Mountains (Utah, USA). Lake sediments were geochemically characterized with ICP-OES, ICP-MS and XRF core scanning. Collections from passive samplers constrain the properties of modern dust, and samples of regolith constrain properties of the local material within the watershed. Ca and Eu are more abundant in dust, whereas Ti and Zr are more abundant in local regolith. As a result, the Ca/Ti and Eu/Zr ratios are indices for the dust content of lake sediment. In all records, the dust index rises in the early Holocene as watersheds became stabilized with vegetation, reducing the influx of local material. After this point, values remained above average through the middle Holocene, consistent with an increased dust content in the sediment. Dust index values drop in the late Holocene in most lakes, suggesting a decrease in dust abundance. Generally synchronous shifts in dust index values in cores from lakes in different parts of this mountain range are evidence of enhanced dust deposition in this region during the middle Holocene, and are consistent with a variety of records for increased aridity in the south-western USA at this time.