Infrared emission from comets

A brief discussion of the infrared observations from 4 to 20 micrometers of seven comets is presented. The observed infrared emission from comets depends primarily on their heliocentric distance. A model based on grain populations composed of a mixture of silicate and amorphous carbon particles in the mass ratio of about 40 to 1, with a power-law size distribution similar to that inferred for comet Halley, is applied to the observations. The model provides a good match to the observed heliocentric variation of both the 10 micrometers feature and the overall thermal emission from comets West and Halley. Matches to the observations of comet IRAS-Araki-Alcock and the antitail of comet Kohoutek require slightly larger grains. While the model does not match the exact profile and position of the 3.4 micrometers feature discovered in comet Halley, it does produce a qualitative fit to the observed variation of the feature's strength as a function of heliocentric distance. The calculations predict that the continuum under the 3.4 micrometers feature is due primarily to thermal emission from the comet dust when the comet is close to the Sun and to scattered solar radiation at large heliocentric distances, as is observed. A brief discussion of the determination of cometary grain temperatures from the observed infrared emission is presented. It is found that the observed shape of the emission curve from about 4 to 8 micrometers provides the best spectral region for estimating the cometary grain temperature distribution.     

Distinguishing between natural and aquaculture-derived sediment concentrations of heavy metals in the Broughton Archipelago, British Columbia

Marine sediment samples were collected in the Broughton Archipelago, British Columbia, to assess the use of a geochemical normalization technique in the identification of a chemical tracer of aquaculture waste material. Zinc and copper were suggested as tracers of feed pellets, while copper was considered an indicator of anti-foulant agents used on netpen systems. The sediment samples were analyzed for carbon, nitrogen, organic matter, water, trace-element, and free sulfide concentrations, and sediment grain-size distribution. Sediment texture analysis revealed a wide range of substrate types from sand to silty loam categories. Strong relationships between sediment texture, sediment porosity, and organic content were observed across both near-field and far-field stations. Excess zinc and copper sediment concentrations, identified using a lithium-normalization technique, were restricted to near-field sampling stations (0 and 30m from netpen systems). The relationships between these metal tracers and organic content and sulfur concentrations were explored to account for variations in sediment concentrations of zinc and copper.     

Assessment of the historical trace metal contamination of sediments in the Elizabeth River, Virginia

Two sediment cores (Southern Branch, PC-1, and Western Branch, WB-2) were taken from the highly industrialized Elizabeth River, Virginia. The concentrations of trace metals cadmium, cobalt, chromium, copper, nickel, lead and zinc, major elements iron, manganese and aluminum, organic carbon content and the specific surface area of the sediments were determined in each of the cores. Down-core variations in metals varied significantly in each core with maximum contamination events occurring at different times in different portions of the river. In PC-1, maximum metal concentrations were seen after the appearance of (137)Cs. In contrast, the highest levels in WB-2 occurred well before the appearance of (137)Cs. Although stricter environmental regulations have caused a decrease in metal concentrations since the 1980s, the concentrations in the surface sediments of many trace metals were elevated to levels 2-5 times higher than the levels at the bottom of the cores in both the Southern and Western Branches of the river.     

Identification of estrogen-like alkylphenols in produced water from offshore oil installations

Produced water released into the sea from oil installations contains a vast number of organic compounds. This work focuses on the analysis and identification of phenols in produced water, in particular long-chain para-substituted alkylphenols, which act as endocrine disruptors for marine biota. Some alkylphenol standards, unavailable commercially, have been synthesised and some compounds of interest identified. However, a complete identification is not possible since conventional GC techniques cannot achieve the desired degree of separation. An overview of the levels of the 52 known alkylphenols in produced water from nine oil installations in the North and Norwegian Seas has been made. The previously unidentified alkylphenols in produced water have been characterised by means of alkylphenol retention indices (APRI) and mass spectrometry, and their total amounts estimated for the same nine locations. Our results confirm the presence of naphthols and other as yet unidentified compounds in produced water, while thiophenols were not detected by the used technique.     

Effect of iron type on kinetics and carbon isotopic enrichment of chlorinated ethylenes during abiotic reduction on Fe(0)

Four samples of two commercially available iron brands used as substrate for iron permeable reactive barriers (PRBs) were tested for suitability for remediation of perchloroethylene (PCE), trichloroethylene (TCE), cis-dichloroethylene (cDCE) and vinyl chloride (VC). Kinetic studies indicate that rates of reaction are enhanced for cDCE and VC on Connelly iron (2.8 x 10(-4) to 6.9 x 10(-4) L/m2/hr and 2.0 x 10(-4) to 9.0 x 10(-4) L/m2/hr, for cDCE and VC, respectively) vs. Peerless iron (3.1 x 10(-5) to 4.6 x 10(-5) L/m2/hr and 2.4 x 10(-5) to 4.1 x 10(-5) L/m2/hr, for cDCE and VC, respectively). Carbon isotopic analyses of the residual chlorinated ethylene (CE) during degradation indicate significant fractionation occurs during reductive dechlorination, with, for example, up to 70% enrichment in carbon isotopic values observed when VC is more than 99% degraded. Comparison of fractionation factors (epsilon) indicates significant differences in carbon isotopic fractionation for different iron types and for different CEs. For the lower CEs (cDCE and VC) in particular, both slower reaction rates and larger fractionation are observed for degradation on Peerless vs. Connelly iron. This is the first study to establish a correlation between the rate of abiotic degradation on Fe(0) and the extent of isotopic fractionation, and the first to confirm consistent differences in these two parameters as a function of iron type. The possibility that these differences in kinetics and carbon isotopic fractionation for cDCE and VC are related to differences in branching ratios between competing hydrogenolysis and beta-elimination reactions during reductive dechlorination on the iron surfaces is discussed.     

Impacts of the Jessica oil spill on intertidal and shallow subtidal plants and animals

Densities of fishes, invertebrates and plants at rocky intertidal and shallow subtidal sites were censused 1-2 days prior to the Jessica oil spill and compared with information obtained for the same sites one month after the spill, both for sites impacted by oil and unaffected reference sites. While the availability of pre-spill data made this analysis one of the most powerful to date for testing impacts of oil on shoreline environments, no clear changes attributable to oiling could be identified. Discharged oil appeared to cause very little impact in the intertidal and shallow subtidal zones, with such impacts lying within the range of natural spatial and temporal variation at sites investigated. Factors considered to minimize impact in Galápagos included paucity of fully sheltered shores in spill path, moderate wave action, warm temperature, high levels of sunlight, and mixing of bunker oil with diesel.     

1997年2月27日巴基斯坦地震（Ms=7.3）

本对１９９７年２月２７日巴基斯坦地震（Ｍｓ＝７．３）进行了分析研究,该地震发生在巴鲁奇斯坦（Ｂａｌｕｃｈｉｓｔａｎ）省的剪切带内。１９９７年２月２７日至３月２２日记录的余震分布图,提出了破裂长度及破裂取向及破裂取向的第一手资料。破裂区范围为２２ｋｍ×１１０ｋｍ,在剪切带西部呈北西走向,与区域构造趋势一致。采用Ｋｉｋｕｃｈｉ Ｋａｎａｍｏｒｉ（１９９１）公式计算震源机制解,表明西北－南东向冲断层为     

Estimating ground water recharge from topography, hydrogeology, and land cover

Proper management of ground water resources requires knowledge of the rates and spatial distribution of recharge to aquifers. This information is needed at scales ranging from that of individual communities to regional. This paper presents a methodology to calculate recharge from readily available ground surface information without long-term monitoring. The method is viewed as providing a reasonable, but conservative, first approximation of recharge, which can then be fine-tuned with other methods as time permits. Stream baseflow was measured as a surrogate for recharge in small watersheds in southeastern Wisconsin. It is equated to recharge (R) and then normalized to observed annual precipitation (P). Regression analysis was constrained by requiring that the independent and dependent variables be dimensionally consistent. It shows that R/P is controlled by three dimensionless ratios: (1) infiltrating to overland water flux, (2) vertical to lateral distance water must travel, and (3) percentage of land cover in the natural state. The individual watershed properties that comprise these ratios are now commonly available in GIS data bases. The empirical relationship for predicting R/P developed for the study watersheds is shown to be statistically viable and is then tested outside the study area and against other methods of calculating recharge. The method produces values that agree with baseflow separation from streamflow hydrographs (to within 15% to 20%), ground water budget analysis (4%), well hydrograph analysis (12%), and a distributed-parameter watershed model calibrated to total streamflow (18%). It has also reproduced the temporal variation over 5 yr observed at a well site with an average error < 12%.     

Effects of chitin on microbial emulsification, mineralization potential, and toxicity of bunker C fuel oil

Bunker C, one of the most frequently spilled petroleum products in the US, is difficult to remove from oiled surfaces and is relatively recalcitrant to biodegradation; therefore, emulsification and biodegradability must be optimized before bioremediation can be considered a viable treatment option. Sand from a freshly oiled beach near Dutch Harbor, Alaska, was incubated at 10 degrees C with nutrients (Bushnell-Haas (BH)) or nutrients with crab shell chitin (BH-C). BH-C amendment resulted in greater numbers of bunker C emulsifiers and greater mineralization potentials for hexadecane, phenanthrene, and fluorene than with BH only. Compared to BH alone, mineralization potentials for bunker C also were higher in BH-C, with an estimated 8% of fuel oil mineralized after 6 weeks. Microbially emulsified oil was more toxic than in uninoculated controls (p < 0.05) as measured by Microtox assays. However, toxicity was significantly lower in BH-C than BH after 4 and 6 weeks incubation (p < 0.05).