VELOCITY DISPERSION OF SEISMIC WAVES*

In well velocity surveys made to calibrate Sonic (CV) Logs the calibration survey uses frequencies around 50 Hz whereas the Sonic Logging tool uses frequencies around 20 kHz. There thus exists the possibility of making a direct measure of velocity dispersion. In any one survey the disturbing factors, both instrumental and operational, will often mask any dispersive effect that might exist. Consequently this paper reports on a statistical analysis of the velocity differences resulting from calibration surveys and Sonic logs. Only Borehole Compensated Sonic Logs were used. Four areas were investigated: the North Sea, Abu Dhabi, Libya and Alaska. After rejecting logs and calibration records which were obviously in error there remained 424000 feet (about 130 km) of usable log distributed throughout 66 wells. The four areas were analysed separately and in no case was the estimated dispersion significantly different from zero. However, the mean values did correlate with lithology from (? 0.17 ± 0.18)% for the essentially carbonate section in Abu Dhabi to (+ 0.45 ± 0.25)% for the sand-shale section in Alaska, a positive sign meaning that the higher frequencies travelled faster. Except for Alaska the calibration surveys were made with a wall-clamp geophone, and for these areas amplitude measurements were made. After suitable corrections estimates of the absorption parameter Q were obtained. These varied from 20 to 200 with mean values of 63 for Libya, 70 for Abu Dhabi and 88 for the North Sea (excluding the Tertiary). If, as is usually assumed, the absorption mechanism is linear and is described by a Q which is independent of frequency, then these values would necessarily imply dispersion of several percent. As instanced above no such dispersion was observed. It is possible that the expected dispersion was compensated for by invasion of the mud filtrate into the borehole walls, but it is more likely that the absorption mechanism was substantially non-linear.     

P- and S-wave anisotropy of a synthetic sandstone with controlled crack geometryl1

A method is reported for the production of synthetic porous sandstones containing cracks of known dimensions and geometry with respect to the matrix. A synthetic sandstone was manufactured from Sand cemented with an epoxy glue. The cracks of known geometry were introduced into the material in the manufacturing stage, by emplacing thin metallic discs in the Sand-epoxy matrix. These discs were chemically leached out of the consolidated porous sandstone. Acoustic anisotropy. and shear-wave splitting were observed in the synthetic sandstones. For the dry sample the observed angular dependence of the P- and S- wave velocities (at 100 kHz) compares well, qualitatively, with the theoretical models of Hudson and of Thomsen. Quantitatively, however, the experimental data fits Hudson's model better. For the case of a saturated sample the experimental results are in excellent agreement with Thomsen's model. Hudson's model, on the other hand, predicts a different angular dependence for P-waves. This demonstrates that the concept of fluid transfer between cracks and the ambient porosity can be a significant process. The results reported here are from the first successful experiment in which the theoretical models were tested on a porous material containing a known crack geometry.     

Reproductive biology of Spondias tuberosa Arruda (Anacardiaceae), an endemic fructiferous species of the caatinga (dry forest), under different management conditions in northeastern Brazil

In areas under different management conditions (management units, MUs) located either on a slope or at the base of a slope and either in a plantation or in a pasture, we compared the flower and fruit production, floral visitors, visitation rates and pre-emergent reproductive success (PERS) of Spondias tuberosa (Anacardiaceae) in an area of dry forest in NE Brazil. Individuals in the plantation MU produced more flowers per inflorescence than those in other MUs, but there were no statistical differences in mean fruit set among MUs. The only difference in mean visitation rates was between the plantation (65.83 ± 38.49) and the slope sites (11.5 ± 12.8). We observed visits by 19 insect species, including bees (31.6%), butterflies (31.6%), wasps (26.3%) and flies (10.5%). A clustering analysis based on the number of visits showed that a) the plantation site is most different from the other MUs, b) the pasture and the site at the base of the slope are similar to the slope site, and c) the higher frequency of visits of pollinators in the plantation MU was responsible for these differences. Of the 19 species of insects visiting the flowers, 12 were considered pollinators. The pollinator similarity analysis indicated a clear separation between areas and suggested that human activity has resulted in the replacement of native pollinators by exotic species. However, these changes apparently have not affected the pre-emergent reproductive success of S. tuberosa. Our results show that plant reproductive biology in semi-arid ecosystems may be modified by human action and that changes in floral production and pollinator guilds are the most conspicuous effects. However, the traditional management performed by local people may not affect the reproductive success of plant species.     

The neotectonics and geodynamics of the Lower Oka Region (East European Craton)

The neotectonic structures of the Lower Oka (Nizhneokskii) Region formed under different geodynamic conditions. This is attested by the morphology, orientation, internal structure, and jointing of the structures. The Oka-Tsna arc formed under the effect of tension from an inner source on the one hand and stress from the Alpian belt on the other hand. The latitudinally-oriented structures of the northwestern slope of the Tokmovo arc emerged as a result of uplift and widening. Both types of structure are combined within the limits of the Oka-Murom trough, which is a geodynamically active zone.     

Determination of the optimum period for ciliated protozoa colonizing of an artificial substrate in a tropical aquatic ecosystem

The optimum period for ciliated protozoa colonizing of an artificial substrate, the polyurethane foams have been assessed in a tropical aquatic ecosystem, the Ekozoa stream of the Mfoundi River Basin in Yaounde (Cameroon). 5?days were calculated as the highest period for the biological indicators of pollution to optimally colonize the artificial substrate. This time interval is the same for all the sampling stations assessed from upstream to downstream and the various microhabitats along the water course. The statistical method applied is that of the completely randomized blocks. The colonization of the substrate increases from the first day to the fifth day, before decreasing to the tenth day. The statistical analysis of variance between the maximum day and the other sampling period was significant at 5?% while the calculation of the value between different points of the same station was not significant. The average number of ciliated protozoan ranges from 20 to 23, from upstream to downstream.     

H 187 - At the Onset of a New Eclipse

CCD photometry data of the T Tauri star H 187 are presented. They show that a new eclipse of this star began at the end of 2004. Since only one eclipse of this star has been observed previously with a duration of 3.5 years, our data indicate that the eclipses of this object are periodic with a period P=4.9 years between eclipses. Thus, in terms of the absolute duration of the eclipses and in terms of their relative length as a fraction of the period, H 187 is one of the most exotic objects in the sky. __________ Translated from Astrofizika, Vol. 48, No. 4, pp. 529–534 (November 2005).     

Formalization of assessing radioactive waste burial site seismic regime parameters from seismological and geological data

A model is proposed that shows the relation of the block structure of the crust and earthquake sources (Sadovskii, 1979; Rodionov, 1979, 1984, 1994; Bugaev, 1999, 2011, 2014, 2015). The model can formalize how to assess the prediction of seismic regime parameters depending on the elastic limit and conditions and rate of deformation of the Earth’s crust. The spent nuclear fuel repository site in Olkiluoto (Finland) and a site in the area of the Krasnoyarsk Mining and Chemical Combine are considered as examples. It is demonstrated that the parameters of the prediction graphs limit the location of the points of magnitude repeatability graphs calculated for a site based on samples of earthquakes in the area according to different authors. This makes it possible to recommend predictive assessment of seismic regime parameters for stability monitoring of the seismic regime and safety analysis of a geological environment’s insulation properties for waste sites from the results of seismological monitoring and high-precision observations of modern movements of the Earth’s crust.     

Current Convenience,Desperate Deforestation: Ghana's AdjustmentProgram and the Forestry Sector

Since the early 1980s, most Sub-Saharan African countries have resorted to structural adjustment programs to reform their ailing economies. Adjustment, however, may provide a convenient means for governments of the adjusting economies and international capital to meet their current economic and political interests, usually by sacrificing the physical environment, with huge environmental costs for the adjusting country. This paper uses Ghana's forestry sector, which has been characterized by a dramatic increase in woodexports since adjustment, to demonstrate a direct link between adjustment and environmental destruction. Ghana's dramatic increase in wood exports, involving a rapid and extensive deforestation, results from the government's need to meet its increasing external debt service obligations, and is exacerbated by the series of massive local currency devaluation required under adjustment “to get prices right.” The systematic reduction in government revenue from devaluation to amortize the increasing debts, keeps the government and indebted wood processing firms on a treadmill of export-based extraction/deforestation.