Quantitative Assessment of Extrinsic Damage in Rock Materials

Summary   Comminution (crushing and grinding) of rock materials is energy-intensive and expensive. Much effort has been directed to improve the efficiency of conventional milling practice, but relatively little attention has been given to the potential benefits of blast-induced (extrinsic) damage on comminution processes. The objective of this research is to investigate the effect of shock-induced “crack-like” damage on rock properties for three petrologically distinct rock materials under laboratory conditions. In order to evaluate the effect of shock-induced damage, a quantitative measure of rock damage is needed. Shock loading of rock material was accomplished with an explosively driven split Hopkinson pressure bar. Laboratory measurements show that the average uniaxial compressive strengths for damaged specimens are slightly lower than those for intact specimens. Based on damage mechanics, the scalar damage variable () was experimentally determined as the relative reduction in ultrasonic wave velocity of damaged versus intact rock. increases as the shock energy dissipated in rock material increases. A crack density was determined by confocal image analysis. Measurements following shock loading indicate that ultrasonic wave velocity in rock partially recovers with time. Ultrasonic wave velocity and confocal image analysis may be useful in quantitatively assessing the internal crack-like damage in rock materials.     

Integrated methodology for flood risk assessment and application in urban communities of Pakistan

Flood disasters and its consequent damages are on the rise globally. Pakistan has been experiencing an increase in flood frequency and severity along with resultant damages in the past. In addition to the regular practices of loss and damage estimation, current focus is on risk assessment of hazard-prone communities. Risk measurement is complex as scholars engaged in disaster science and management use different quantitative models with diverse interpretations. This study tries to provide clarity in conceptualizing disaster risk and proposes a risk assessment methodology with constituent components such as hazard, vulnerability (exposure and sensitivity) and coping/adaptive capacity. Three communities from different urban centers in Pakistan have been selected based on high flood frequency and intensity. A primary survey was conducted in selected urban communities to capture data on a number of variables relating to flood hazard, vulnerability and capacity to compute flood risk index. Households were categorized into different risk levels, such as can manage risk, can survive and cope, and cannot cope. It was found that risk levels varied significantly across the households of the three communities. Metropolitan city was found to be highly vulnerable as compared to smaller cities due to weak capacity. Households living in medium town had devised coping mechanisms to manage risk. The proposed methodology is tested and found operational for risk assessment of flood-prone areas and communities irrespective of locations and countries.     

Influence of lithology and fluid flow on the temperature distribution in a sedimentary basin: A case study from the Cold Lake area, Alberta, Canada

A detailed study of the groundwater and terrestrial heat flow was carried out over an area of 23,700 km² west of Cold Lake, Alberta, which is part of the western Canada sedimentary basin. The information for the study was provided from data from 3100 wells drilled in the area. The screening and processing of thousands of stratigraphic picks, drillstem test data, bottom hole temperatures and formation water chemistry data was performed mainly using a specially designed software package. As a result, every stratigraphic unit is characterized by appropriate hydraulic and thermal parameters.

A sequence of aquifers, aquitards and aquicludes was differentiated. The groundwater flow in the Paleozoic aquifers is regional in nature and mainly horizontal. The flow in the Cretaceous aquifers is of intermediate type, mainly downward oriented. In general, the permeability of the Cretaceous and Paleozoic strata has such low values that the fluid velocity is less than 1 cm/yr.

The convective heat transport in the hydrostratigraphic sequence is negligible with respect to the conductive heat transfer, as shown by the Peclet number of the fluid and heat flow in porous media. The flow of the terrestrial heat flux from the Precambrian basement of the sedimentary basin to the atmosphere is controlled by the variability in the thermal properties of the formations in the basin.

The geothermal gradients were computed by hydrostratigraphic unit using a linear regression fit to the temperature data. As expected, they show higher values for the less conductive layers, and lower values for the more conductive ones. The weighted average, or the integral geothermal gradient of the whole sedimentary column, was computed by considering the difference between the temperature measured at the Precambrian basement and the annual average temperature at the surface. The areal distribution of the integral geothermal gradient (with an average of 22.0 mK/m) shows a strong correlation with the lithology.

The areal temperature distribution for each hydrostratigraphic unit was analyzed by mapping the deviation of the measured value from the computed geothermal gradient. The lateral heat flow from warmer to colder areas is one order of magnitude smaller than the vertical heat flow. In the more homogeneous units, the lateral heat flow presents a trend that seems to reflect the geometry and lithology.     

Lower-Middle Triassic rocks in the Enmynveem River (western Chukotka)

The Lower-Middle Triassic section of the Enmynveem River dated on the basis of macrofauna includes three genetic types of sediments with different structural-textural features: (1) sediments of high-density autokinetic flows; (2) sediments of low-density turbidity flows; and (3) background sediments with thin interlayers of fine-grained turbidites. It has been established that sandy-silty sediments of all three genetic types formed on the continental slope in deep-water conditions, but their accumulation was related to the erosion of rocks in various provenances. Some sediments were formed as the result of the erosion of proximal volcanic complexes, whereas other sediments were related to the erosion of metamorphic rocks on the distal continental land.     

Autogenic avulsion,channelization and backfilling dynamics of debris‐flow fans

Alluvial fans develop their semi‐conical shape by quasi‐cyclic avulsions of their geomorphologically active sector from a fixed fan apex. On debris‐flow fans, these quasi‐cyclic avulsions are poorly understood, partly because physical scale experiments on the formation of fans have been limited largely to turbidite and fluvial fans and deltas. In this study, debris‐flow fans were experimentally created under constant extrinsic forcing, and autogenic sequences of backfilling, avulsion and channelization were observed. Backfilling, avulsion and channelization were gradual processes that required multiple successive debris‐flow events. Debris flows avulsed along preferential flow paths given by the balance between steepest descent and flow inertia. In the channelization phase, debris flows became progressively longer and narrower because momentum increasingly focused on the flow front as flow narrowed, resulting in longer run‐out and deeper channels. Backfilling commenced when debris flows reached their maximum possible length and channel depth, as defined by channel slope and debris‐flow volume and composition, after which they progressively shortened and widened until the entire channel was filled and avulsion was initiated. The terminus of deposition moved upstream because the frontal lobe deposits of previous debris flows created a low‐gradient zone forcing deposition. Consequently, the next debris flow was shorter which led to more in‐channel sedimentation, causing more overbank flow in the next debris flow and resulting in reduced momentum to the flow front and shorter runout. This topographic feedback is similar to the interaction between flow and mouth bars forcing backfilling and transitions from channelized to sheet flow in turbidite and fluvial fans and deltas. Debris‐flow avulsion cycles are governed by the same large‐scale topographic compensation that drives avulsion cycles on fluvial and turbidite fans, although the detailed processes are unique to debris‐flow fans. This novel result provides a basis for modelling of debris‐flow fans with applications in hazards and stratigraphy.     

Relationship between footwall composition,crustal contamination,and fluid–rock interaction in the Platreef,Bushveld Complex,South Africa

In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ ¹⁸O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ _{plagioclase–pyroxene} values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ _{plagioclase–pyroxene} in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO₂-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO₂ produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.     

Earthquake response of asymmetric building with MR damper

Plan asymmetric buildings are very susceptible to earthquake induced damage due to lateral torsional coupling, and the corners of these systems suffer heavy damage during earthquakes. Therefore, it is important to investigate the seismic behavior of an asymmetric plan building with MR dampers. In this study, the effectiveness of MR damper-based control systems has been investigated for seismic hazard mitigation of a plan asymmetric building. Furthermore, the infl uence of the building parameters and damper command voltage on the control performance is examined through parametric study. The building parameters chosen are eccentricity ratio and frequency ratio. The results show that the MR damper-based control systems are effective for plan asymmetric systems.     

TRANSIENT ELECTROMAGNETIC FIELD OF A POLARIZABLE HALF-SPACE DUE TO VARIOUS CURRENT PULSES *

In this paper, the expressions for the induced voltage function V(T) and mutual impedance function Z_m(T) have been derived for specific range of time T and specific values of induced polarization parameters a for ramp and saw-tooth type of current pulses. The computed results for various cases are also presented. The low values of induced polarization parameter a represent the medium possessing membrane polarization, whereas high values exhibit electrode polarization medium. The method has practical applicability and is best suited for the interpretation of transient electromagnetic fields over a polarizable half-space.