Investigation of the dynamic behaviour of a storage tank with different foundation types focusing on the soil‐foundation‐structure interactions using centrifuge model tests

This paper proposes a dynamic centrifuge model test method for the accurate simulation of the behaviours of a liquid storage tank with different types of foundations during earthquakes. The method can be used to determine the actual stress conditions of a prototype storage‐tank structure. It was used in the present study to investigate the soil‐foundation‐structure interactions of a simplified storage tank under two different earthquake motions, which were simulated using a shaking table installed in a centrifuge basket. Three different types of foundations were considered, namely, a shallow foundation, a slab on the surface of the ground connected to piles and a slab with disconnected piles. The test results were organised to compare the ground surface and foundation motions, the slab of foundation and top of structure motions and the horizontal and vertical motions of the slab, respectively. These were used to establish the complex dynamic behaviours of tank models with different foundations. The effects of soil–foundation–structure interaction with three foundation conditions and two different earthquake motions are focused and some important factors, that should be considered for future designs are also discussed in this research. Copyright © 2017 John Wiley & Sons, Ltd.     

Seismic hazard level reduction for existing buildings considering remaining building lifespans

Seismic hazard levels lower than those for design of new buildings have been permitted for seismic evaluation and retrofit of existing buildings due to the relatively short remaining lifespans. The seismic hazard reduction enables costeffective seismic evaluation and retrofit of existing buildings with limited structural capacity. The current study proposes seismic hazard reduction factors for Korea, one of low to moderate seismicity regions. The seismic hazard reduction factors are based on equal probabilities of non-exceedance within different remaining building lifespans. A validation procedure is proposed to investigate equality of seismic risk in terms of ductility-based limit states using seismic fragility assessment of nonlinear SDOF systems, of which retrofit demands are determined by the displacement coefficient method of ASCE 41-13 for different target remaining building lifespans and corresponding reduced design earthquakes. Validation result shows that the use of seismic hazard reduction factors can be permitted in conjunction with appropriate lower bounds of the remaining building lifespans.     

Fundamental yet simplified model for liquefaction instability

A fundamental procedure is proposed for the identification of liquefaction in saturated soils based on the instability in the material's microstructure. The disturbed state concept (DSC) provides a unified constitutive model for the characterization of entire stress–strain behaviour under cyclic loading, and the values of disturbance at threshold states in the deforming microstructure provides the basis for the identification of liquefaction. The procedure is verified with respect to laboratory behaviour of two sands, saturated Ottawa and Reid Bedford. A mathematical analysis of the DSC constitutive matrix is also performed. Procedures for the application of the DSC for simplified analysis and design, and in finite element procedures are presented. It is believed that the proposed model can provide a fundamental yet simplified procedure for liquefaction analysis, and as a result, it is considered to be an improvement over the available empirical and energy-based procedures. © 1998 John Wiley & Sons, Ltd.     

Development of the AUV ‘ISiMI’ and a free running test in an Ocean Engineering Basin

The Korea Ocean Research and Development Institute (KORDI) has developed a small AUV named ISiMI. The mission of ISiMI is to work as a test-bed AUV for the development and validation of various algorithms and instruments required to enhance the AUV's functions. The design concept of ISiMI is that of a vehicle small enough to cruise the Ocean Engineering Basin (OEB) of KORDI and to be handled by one or two people. The downsized design and the cruising ability in its tank enable fast experimental feedback on AUV technologies and a shorter development period for new technologies. This paper presents a review of our research work on the development of ISiMI, with a performance evaluation by simulation and an experimental test. After the design and implementation of ISiMI, including its positioning system in the OEB, are presented, a series of test results in the OEB and discussions of the results are presented, with comparisons of the simulation and experimental outputs.     

Estimation of hydrodynamic coefficients for flow around cylinders in side-by-side arrangement with variation in separation gap

A finite-volume method (FVM) using a multi-block grid technique has been applied to investigate the hydrodynamic coefficients and to categorize the two-dimensional flow pattern around a pair of adjacent cylinders (known here after as double cylinders). Matching grids were used at the interface between blocks (cylinders), and the boundary conditions are imposed around the periphery to exchange physical values across the interface. To validate the developed numerical method, a case with laminar viscous flow around a single cylinder was carried out, the results showed good agreement compared to previously published data. Hydrodynamic coefficients, Strouhal number, and stagnation point change were thoroughly investigated as a function of the separation between the two cylinders. It is found that the changes of hydrodynamic coefficients due to variations in separation are well characterized by the five different vortex flow patterns, which can also be used to explain the flow and vortex pattern around the double cylinders.     

Rainfall‐runoff analysis based on competing linear impulse responses: decomposition of rainfall‐runoff processes

Many recent studies have successfully used neural networks for non‐linear rainfall‐runoff modelling. Due to fundamental limitation of linear structures, approaches employing linear models have been generally considered inferior to the neural network approaches in this area. However, the authors believe that with an appropriate extension, the concept of linear impulse responses can be a viable tool since it enables one to understand underlying dynamics of rainfall‐runoff processes. In this paper, the use of competing impulse responses for rainfall‐runoff analysis is proposed. The proposed method is based on the switch over of competing linear impulse‐responses, each of which satisfies the constraints of non‐negativity and uni‐modality. The computational analyses performed for the rainfall‐runoff data in the Seolma‐Chun experimental basin, Korea showed that the proposed method can yield promising results. Considering the basin characteristics as well as the results from this study, it may be concluded that three impulse responses are enough for rainfall‐runoff analysis. Copyright © 2007 John Wiley & Sons, Ltd.     

Hierarchical probabilistic regionalization of volcanism for Sengan region,Japan

A 1 km square regular grid system created on the Universal Transverse Mercator zone 54 projected coordinate system is used to work with volcanism related data for Sengan region. The following geologic variables were determined as the most important for identifying volcanism: geothermal gradient, groundwater temperature, heat discharge, groundwater pH value, presence of volcanic rocks and presence of hydrothermal alteration. Data available for each of these important geologic variables were used to perform directional variogram modeling and kriging to estimate geologic variable vectors at each of the 23949 centers of the chosen 1 km cell grid system. Cluster analysis was performed on the 23949 complete variable vectors to classify each center of 1 km cell into one of five different statistically homogeneous groups with respect to potential volcanism spanning from lowest possible volcanism to highest possible volcanism with increasing group number. A discriminant analysis incorporating Bayes’ theorem was performed to construct maps showing the probability of group membership for each of the volcanism groups. The said maps showed good comparisons with the recorded locations of volcanism within the Sengan region. No volcanic data were found to exist in the group 1 region. The high probability areas within group 1 have the chance of being the no volcanism region. Entropy of classification is calculated to assess the uncertainty of the allocation process of each 1 km cell center location based on the calculated probabilities. The recorded volcanism data are also plotted on the entropy map to examine the uncertainty level of the estimations at the locations where volcanism exists. The volcanic data cell locations that are in the high volcanism regions (groups 4 and 5) showed relatively low mapping estimation uncertainty. On the other hand, the volcanic data cell locations that are in the low volcanism region (group 2) showed relatively high mapping estimation uncertainty. The volcanic data cell locations that are in the medium volcanism region (group 3) showed relatively moderate mapping estimation uncertainty. Areas of high uncertainty provide locations where additional site characterization resources can be spent most effectively. The new data collected can be added to the existing database to perform future regionalized mapping and reduce the uncertainty level of the existing estimations.     

Dependence of Waterline Mapping on Radar Frequency Used for SAR Images in Intertidal Areas

Waterline detection in the intertidal areas was investigated through synthetic aperture radar (SAR) images and field measurements. Two valuable facts were found in this letter: 1) A discrepancy of waterlines between L- and P-band airborne SAR images was discovered and investigated through precise global positioning system measurements and the theory of the SAR imaging mechanism. In the intertidal areas having low slopes, the Bragg waves resonant with the radar signal can reside in different depths depending on the radar frequency, with the result that the boundary between water and land can be mapped differently in the respective SAR images. 2) Intertidal areas covered with a water film present low radar backscatter in SAR images, which can cause mislocation of waterlines     

Hazard rate estimation of a mixture model with censored lifetimes

This paper is intended to compare the hazard rate from the Bayesian approach with the hazard rate from the maximum likelihood estimate (MLE) method. The MLE of a parameter is appropriate as long as there are sufficient data. For various reasons, however, sufficient data may not be available, which may make the result of the MLE method unreliable. In order to resolve the problem, it is necessary to rely on judgment about unknown parameters. This is done by adopting the Bayesian approach. The hazard rate of a mixture model can be inferred from a method called Bayesian estimation. For eliciting a prior distribution which can be used in deriving a Bayesian estimate, a computerized-simulation method is introduced. Finally, a numerical example is given to illustrate the potential benefits of the Bayesian approach.