Tree-ring growth variability in the Austrian Alps: the influence of site, altitude, tree species and climate

We present an extensive new network of ring-width chronologies, comprising data from 100 sites within the Austrian Eastern Alps, made up of multiple tree species. Principal components analysis and cluster analysis were used to identify five separate high-frequency tree-growth signals from these data. Tree-growth variability at these sites is explained by site altitude and species differences that moderate the effects of the annually varying climatic forcing on tree growth. Recently developed, two-century long gridded climate data sets for the Greater Alpine Region were used to assess the relationship between climate and tree growth. Tree growth at low altitudes is controlled mainly by spring-summer moisture availability. At high altitudes precipitation is no longer a limiting factor and growth is mostly determined by summer temperature. In the intermediate altitudinal range, we did not find any direct relationships with specific climatic variables. High-altitude chronologies suitable for reconstructing past temperatures and low-altitude chronologies suitable for reconstructing past precipitation were identified.     

Water drives the deuterium content of the methane emitted from plants

The spatial distribution of the deuterium content of precipitation has a well-established latitudinal variation that is reflected in organic molecules in plants growing at different locations. Some laboratory and field studies have already shown that the deuterium content of methane emitted from methanogens can be partially related to δD variations of the water in the surrounding environment. Here we present a similar relation for the methane emitted from plant biomass under UV radiation. To show this relation, we determined the hydrogen isotopic composition of methane released from leaves of a range of plants grown with water of different deuterium content (δD = −130‰ to +115‰). The plant leaves were irradiated with UV light and the CH₄ isotopic composition was measured by continuous flow isotope ratio mass spectrometry (CF-IRMS). Furthermore, the deuterium content of bulk biomass and of the methoxyl (OCH₃) groups of the biomass was measured. The D/H ratio successively decreases from bulk biomass (δD = −106‰ to −50‰) via methoxyl groups (δD = −310‰ to −115‰) to the CH₄ emitted (δD = −581‰ to −196‰). The range of isotope ratios in bulk biomass and OCH₃ groups is smaller than in the water used to grow the plants. Methoxyl groups, which contain only non-exchangeable hydrogen, can be used to assess the fraction of external water that was incorporated before OCH₃ groups were formed. Surprisingly, the CH₄ formed under UV irradiation has a wider isotopic range than the OCH₃ groups. Although the precise production pathway cannot be fully determined, the presented experiments indicate that methoxyl groups are not the only source substrate for CH₄, but that other sources, including very depleted ones, must contribute. The main limitation to the interpretation of the data is the possible influence of exchangeable water, which could not be quantified. Future studies should include measurements of leaf water and avoid interaction between different plants via the gas phase. Despite these deficiencies, the results suggest that the deuterium content of the methane generated from plants under UV irradiation is closely linked to δD in precipitation. This dependency, which should also exist for other biogenic methane sources could be evaluated with global isotope models.     

Seismic stratigraphy and paleogeographic evolution of Fairway Basin,Northern Zealandia,Southwest Pacific: from Cretaceous Gondwana breakup to Cenozoic Tonga–Kermadec subduction

We present the first comprehensive seismic‐stratigraphic analysis of Fairway Basin, which is situated on the rifted continent of Zealandia in the Tasman Sea, southwest Pacific, between Australia and New Caledonia. The basin is 700 km long, 150 km wide, and has water depths of 500–3000 m. We describe depositional architecture and paleogeographic evolution of this basin. Basin formation was concurrent with two tectonic events: (i) Cretaceous rifting during eastern Gondwana breakup and (ii) initiation and Cenozoic evolution of Tonga–Kermadec subduction system to the east of the basin. To interpret the basin history we compiled and interpreted 2D seismic‐reflection profiles and make correlations with DSDP boreholes and the geology of New Caledonia. Five seismic‐stratigraphic units were defined. The deepest and oldest unit, FW3, folded and faulted can be correlated with volcaniclastic sediments and magmatic rocks in New Caledonia that are associated with Mesozoic Gondwana margin subduction. Alternatively, given the basin location 200–300 km west of New Caledonia and inboard of the ancient plate boundary, the unit could have formed as Gondwana intra‐continental basin with no known correlative. The overlying unit FW2b records syn‐rift deposition, probably associated with Cretaceous Gondwana breakup. Subaerial erosion supplied terrigenous sediment into the deltas in the northern part of the basin, as suggested by the truncation surfaces on the basement highs and sigmoid reflector geometries within unit FW2b respectively. Above, unit FW2a records post‐rift sedimentation and passive subsidence as the Tasman Sea opened and the Fairway Basin drifted away from Australia. Subsidence led to the flooding of the basement highs and burial of wave‐cut surfaces. Eocene compressive deformation resulted in minor folding and tilting within the Fairway Basin and was associated with the formation of many diapiric structures. The top of unit FW2 is an extensive unconformity that is associated with erosion and truncation on surrounding ridges. Above this unconformity, unit FW1b is interpreted as a turbidite system sourced from topography created during the Eocene tectonic event, which we interpret as being related to Tonga–Kermadec subduction initiation. Pelagic carbonate sedimentation is now prevalent. Unit FW1a has progressively draped the basin during Oligocene to Pleistocene subsidence. Many small volcanic cones were erupted during this final phase of subsidence, either as a delayed consequence of subduction initiation, or related to Tasmantid and Lord Howe hotspot trails. The northern Fairway Ridge remains close to sea level and its reef system continues to supply carbonate detrital sediments into the basin, most likely during sea‐level lowstands. Fairway Basin contains a nearly continuous record of tectonic and paleoclimatic events in the southwest Pacific since Cretaceous time. Its paleogeographic history is a key piece in the puzzle for understanding patterns of regional biodiversity in the southwest Pacific.     

Orthorectification of VHR optical satellite data exploiting the geometric accuracy of TerraSAR-X data

Orthorectification of satellite data is one of the most important pre-processing steps for application oriented evaluations and for image data input into Geographic Information Systems. Although high- and very high-resolution optical data can be rectified without ground control points (GCPs) using an underlying digital elevation model (DEM) to positional root mean square errors (RMSEs) between 3 m and several hundred meters (depending on the satellite), there is still need for ground control with higher precision to reach lower RMSE values for the orthoimages. The very high geometric accuracy of geocoded data of the TerraSAR-X satellite has been shown in several investigations. This is due to the fact that the SAR antenna measures distances which are mainly dependent on the terrain height and the position of the satellite. The latter can be measured with high precision, whereas the satellite attitude need not be known exactly. If the used DEM is of high accuracy, the resulting geocoded SAR data are very precise in their geolocation. This precision can be exploited to improve the orientation knowledge and thereby the geometric accuracy of the rectified optical satellite data. The challenge is to match two kinds of image data, which exhibit very different geometric and radiometric properties. Simple correlation techniques do not work and the goal is to develop a robust method which works even for urban areas, including radar shadows, layover and foreshortening effects. First the optical data have to be rectified with the available interior and exterior orientation data or using rational polynomial coefficients (RPCs). From this approximation, the technique used is the measurement of small identical areas in the optical and radar images by automatic image matching, using a newly developed adapted mutual information procedure followed by an estimation of correction terms for the exterior orientation or the RPC coefficients. The matching areas are selected randomly from a regular grid covering the whole imagery. By adjustment calculations, parameters from falsely matched areas can be eliminated and optimal improvement parameters are found. The original optical data are orthorectified again using the delivered metadata together with these corrections and the available DEM. As proof of method the orthorectified data from IKONOS and ALOS-PRISM sensors are compared with conventional ground control information from high-precision orthoimage maps of the German Cartographic Survey. The results show that this method is robust, even for urban areas. Although the resulting RMSE values are in the order of 2-6 m, the advantage is that this result can be reached even for optical sensors which do not exhibit low RMSE values without using manual GCP measurements.     

Stress and energy reflection from impact on rocks using different indentors

Experiments have been conducted using an impact method with drop-hammers to obtain the required signals so that a detailed analysis of these data could be undertaken to quantify the drillability index of rocks. The dynamic stress waveform or reflected energy from the rock-drill bit interface is represented as a drillability index. This information enables the assessment of the characteristics of the rock under the bit. The results show that neither the amplitude nor the frequency spectra of the reflected stress wave significantly changes with the type of rock tested. However, the energy reflection coefficient varies with rock hardness. In the process of drilling the rocks, the energy reflection coefficient can increase by approximately 20% when the hardness or penetration resistance index of rock is doubled. This investigation confirmed the variation of reflected energy of rocks. For a single sharp or domed indentor, energy reflection decreases with penetration resistance index of the rock while it increases with this index in actual drilling or testing of percussive bits. In drill bit design and in tests for using a single indentor, a reasonable indentor shape should be adopted to correspond to a high energy reflection coefficient. By contrast, the energy reflection from a drill system or percussive bit should be minimised in practice.