Metallothioneins and trace metals in the dogwhelk Nucella lapillus (L.) collected from Icelandic coasts

Different sizes of the dogwhelk Nucella lapillus were collected from eight locations along the southwest and north coasts of Iceland. Concentrations of total metallothioneins (MTs) and heavy metals (Cd, Cu, Cr, Mn, Ni, and Zn) were analysed using the silver saturation method and inductively coupled plasma-atomic emission spectrometry. The level of tributyltin (TBT) contamination was also assessed using imposex indices, the vas deferens stage index (VDSI) and relative penis size index (RPSI). Gufunes N. lapillus presented the highest values of VDSI (4.0) and RPSI (11.1), followed by Grenivík individuals (VDSI = 3.0; RPSI = 0.9), while the Strandakirkja population showed the lowest VDSI (0.3) and zero RPSI. At a standardised size (0.25 g dry soft-body weight), Grenivík N. lapillus exhibited significantly higher concentrations of all metals whereas overall metal concentrations were significantly lower in individuals from Strandakirkja and Garðskagi compared to other study sites. Partial correlation analyses with size correction indicated that MT concentrations were better correlated with Cd and Cu concentrations than with other metals. At the standard size, the pattern of MT concentrations in N. lapillus from different sites was, however, very different from those of metal profiles. Such discrepancies between the patterns of MT and metals in N. lapillus might be explained by the fact that MT induction could be influenced by various factors such as temperature, dietary metal intake, growth rate and co-existence of other MT-inducing chemicals.     

Toxicity of antifouling biocides to the intertidal harpacticoid copepod Tigriopus japonicus (Crustacea, Copepoda): effects of temperature and salinity

Intertidal harpacticoid copepods are commonly used in eco-toxicity tests worldwide. They predominately live in mid-high shore rock pools and often experience a wide range of temperature and salinity fluctuation. Most eco-toxicity tests are conducted at fixed temperature and salinity and thus the influence of these environmental factors on chemical toxicity is largely unknown. This study investigated the combined effect of temperature and salinity on the acute toxicity of the copepod Tigriopus japonicus against two common biocides, copper (Cu) and tributyltin (TBT) using a 2 × 3 × 4 factorial design (i.e. two temperatures: 25 and 35 °C; three salinities: 15.0‰, 34.5‰ and 45.0‰; three levels of the biocide plus a control). Copper sulphate and tributyltin chloride were used as the test chemicals while distilled water and acetone were utilised as solvents for Cu and TBT respectively. 96h-LC50s of Cu and TBT were 1024 and 0.149 μg l⁻¹ respectively (at 25 °C; 34.5‰) and, based on these results, nominal biocide concentrations of LC0 (i.e. control), LC30, LC50 and LC70 were employed. Analysis of Covariance using ‘concentration’ as the covariate and both ‘temperature’ and ‘salinity’ as fixed factors, showed a significant interaction between temperature and salinity effects for Cu, mortality increasing with temperature but decreasing with elevated salinity. A similar result was revealed for TBT. Both temperature and salinity are, therefore, important factors affecting the results of acute eco-toxicity tests using these marine copepods. We recommend that such eco-toxicity tests should be conducted at a range of environmentally realistic temperature/salinity regimes, as this will enhance the sensitivity of the test and improve the safety margin in line with the precautionary principle.     

On the relation between the amplitude of light and radial velocity variations of β Canis Majoris stars

The relation between the amplitude of light m and the amplitude of the radial velocity 2K for Canis Majoris stars is investigated. A linear relationship between m and 2K is found. However, the two stars BW Vul and Sco, which have the largest radial velocity variations, do not seem to share this relationship.     

Amplitude ratios of several groups of variable stars

The observed positions of classical cepheids, RR Lyrae stars, Scuti stars and dwarf cepheids in the logg-logT _e plane form a continuous sequence, thereby defining the location of maximum instability. The amplitude ratio (the ratio of radial velocity amplitude to light amplitude) is small for variables at the upper end of the instability strip and increases almost linearly towards the lower end of the strip. The theory of radial pulsation predicts the trend of this correlation.     

Regional climate model projections for the State of Washington

Global climate models do not have sufficient spatial resolution to represent the atmospheric and land surface processes that determine the unique regional climate of the State of Washington. Regional climate models explicitly simulate the interactions between the large-scale weather patterns simulated by a global model and the local terrain. We have performed two 100-year regional climate simulations using the Weather Research and Forecasting (WRF) model developed at the National Center for Atmospheric Research (NCAR). One simulation is forced by the NCAR Community Climate System Model version 3 (CCSM3) and the second is forced by a simulation of the Max Plank Institute, Hamburg, global model (ECHAM5). The mesoscale simulations produce regional changes in snow cover, cloudiness, and circulation patterns associated with interactions between the large-scale climate change and the regional topography and land-water contrasts. These changes substantially alter the temperature and precipitation trends over the region relative to the global model result or statistical downscaling. To illustrate this effect, we analyze the changes from the current climate (1970–1999) to the mid twenty-first century (2030–2059). Changes in seasonal-mean temperature, precipitation, and snowpack are presented. Several climatological indices of extreme daily weather are also presented: precipitation intensity, fraction of precipitation occurring in extreme daily events, heat wave frequency, growing season length, and frequency of warm nights. Despite somewhat different changes in seasonal precipitation and temperature from the two regional simulations, consistent results for changes in snowpack and extreme precipitation are found in both simulations.     

Arsenite sequestration at the surface of nano-Fe(OH)2, ferrous-carbonate hydroxide, and green-rust after bioreduction of arsenic-sorbed lepidocrocite by Shewanella putrefaciens

X-ray Absorption Fine Structure (XAFS) spectroscopy was used in combination with high resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), X-ray energy dispersive spectroscopy (XEDS), X-ray powder diffraction, and Mössbauer spectroscopy to obtain detailed information on arsenic and iron speciation in the products of anaerobic reduction of pure and As(V)- or As(III)-adsorbed lepidocrocite (γ-FeOOH) by Shewanella putrefaciens ATCC 12099. We found that this strain of S. putrefaciens is capable of using Fe(III) in lepidocrocite and As(V) in solution or adsorbed on lepidocrocite surfaces as electron acceptors. Bioreduction of lepidocrocite in the absence of arsenic resulted in the formation of hydroxycarbonate green rust 1 [Fe^II₄Fe^III₂(OH)₁₂CO₃: GR1(CO₃)], which completely converted into ferrous-carbonate hydroxide (Fe^II₂(OH)₂CO₃: FCH) over nine months. This study thus provides the first evidence of bacterial reduction of stoichiometric GR1(CO₃) into FCH. Bioreduction of As(III)-adsorbed lepidocrocite also led to the formation of GR1(CO₃) prior to formation of FCH, but the presence of As(III) slows down this transformation, leading to the co-occurrence of both phases after 22-month of aging. At the end of this experiment, As(III) was found to be adsorbed on the surfaces of GR1(CO₃) and FCH. After five months, bioreduction of As(V)-bearing lepidocrocite led directly to the formation of FCH in association with nanometer-sized particles of a minor As-rich Fe(OH)₂ phase, with no evidence for green rust formation. In this five-month experiment, As(V) was fully converted to As(III), which was dominantly sorbed at the surface of the Fe(OH)₂ nanoparticles as oligomers binding to the edges of Fe(OH)₆ octahedra at the edges of the octahedral layers of Fe(OH)₂. These multinuclear As(III) surface complexes are characterized by As-As pairs at a distance of 3.32 ± 0.02 Å and by As-Fe pairs at a distance of 3.50 ± 0.02 Å and represent a new type of As(III) surface complex. Chemical analyses show that the majority of As(III) produced in the experiments with As present is associated with iron-bearing hydroxycarbonate or hydroxide solids, reinforcing the idea that, at least under some circumstances, bacterial reduction can promote As(III) sequestration instead of mobilizing it into solution.     

Linear and nonlinear vibration of non-uniform beams on two-parameter foundations using p-elements

A hierarchical finite element is presented for the geometrically nonlinear free and forced vibration of a non-uniform Timoshenko beam resting on a two-parameter foundation. Legendre orthogonal polynomials are used as enriching shape functions to avoid the shear-locking problem. With the enriching degrees of freedom, the accuracy of the computed results and the computational efficiency are greatly improved. The arc-length iterative method is used to solve the nonlinear eigenvalue equation. The computed results of linear and nonlinear vibration analyses show that the convergence of the proposed element is very fast with respect to the number of Legendre orthogonal polynomials used. Since the elastic foundation and the axial load applied at both ends of the beam affect the ratios of linear frequencies associated with the internal resonance, they influence the nonlinear vibration characteristics of the beam. The axial tensile stress of the beam in nonlinear vibration is investigated in this paper, and attention should be paid to the geometrically nonlinear vibration resulting in considerably large axial tensile stress in the beam.     

Phosphate removal from water by naturally occurring shale,sandstone, and laterite: The role of iron oxides and of soluble species

Aqueous phosphate removal by three geomaterials from Ivory Coast was evaluated to determine their potential application as low-cost phosphate adsorbents in wastewater treatment. Batch experiments showed that phosphate uptake strongly depended on pH. Laterite and sandstone dissolution was less pronounced compared to shale. A correlation between concentrations of aqueous cation species released from shale and phosphate uptake was observed. The kinetics were well described using the pseudo-second-order model. Isotherms displayed a saturation level on shale, while phosphate uptake continuously increased for laterite and sandstone. The removal efficiency decreased in the following ranking order: laterite > sandstone > shale. Laterite was also the most efficient adsorbent in column experiments. The high phosphate removal efficiency of laterite (8.3 mg PO₄ g^?1) was attributed to the presence of superparamagnetic low grain sizes of goethite. Laterite is a particularly promising material for further investigation in wastewater treatment technology such as constructed wetlands.     

A Statistical Upscaling Workflow for Warm Solvent Injection Processes for Heterogeneous Heavy Oil Reservoirs

Natural Resources Research - Hybrid solvent- and thermal-based methods offer an important potential for reducing the environmental impact and enhancing recoveries in heavy oil production processes....