A powder neutron diffraction study of the crystal structure of the fluoroperovskite NaMgF<Subscript>3</Subscript> (neighborite) from 300 to 3.6 K

The cell dimensions and crystal structures of the fluoroperovskite NaMgF₃ (neighborite), synthesized by solid state methods, have been determined by powder neutron diffraction and Rietveld refinement over the temperature range 300–3.6 K using Pt metal as an internal standard for calibration of the neutron wavelength. These data show that Pbnm NaMgF₃ does not undergo any phase transitions to structures of lower symmetry with decreasing temperature. The cell dimensions and atomic coordinates together with polyhedron volumes and distortion indices are given for Pbnm NaMgF₃ at 25 K intervals from 300 to 3.6 K. Decreases in the a and c cell dimensions reach a saturation point at 50 K, whereas the b dimension becomes saturated at 150 K. The distortion of the structure of Pbnm NaMgF₃ from the aristotype cubic structure is described in terms of the tilting of the MgF₆ octahedra according to the tilt scheme a ⁻ a ⁻ c ⁺ . With decreasing temperature the antiphase tilt (a ⁻) increases from 14.24° to 15.39°, whereas the in-phase tilt (c ⁺ ) remains effectively constant at ∼10.7°. Changes in the tilt angles are insufficient to cause changes in the coordination sphere of Na that might induce a low temperature phase transition. The structure of Pbnm NaMgF₃ is also described in terms of normal mode analysis and displacements of the condensed normal modes are compared with those of Pbnm KCaF₃.     

Characteristic analysis—1981: Final program and a possible discovery

The latest or n ewest version of the char acteristic an alysis (NCHARAN)computer program offers the exploration geologist a wide variety of options for integrating regionalized multivariate data. The options include the selection of regional cells for characterizing deposit models, the selection of variables that constitute the models, and the choice of logical combinations of variables that best represent these models. Moreover, the program provides for the display of results which, in turn, makes possible review, reselection, and refinement of a model. Most important, the performance of the above-mentioned steps in an interactive computing mode can result in a timely and meaningful interpretation of the data available to the exploration geologist. The most recent application of characteristic analysis has resulted in the possible discovery of economic sulfide mineralization in the Grong area in central Norway. Exploration data for 27 geophysical, geological, and geochemical variables were used to construct a mineralized and a lithogeochemical model for an area that contained a known massive sulfide deposit. The models were applied to exploration data collected from the Gjersvik area in the Grong mining district and resulted in the identification of two localities of possible mineralization. Detailed field examination revealed the presence of a sulfide vein system and a partially inverted stratigraphic sequence indicating the possible presence of a massive sulfide deposit at depth.     

Rapid incorporation of lipids into macromolecules during experimental decay of invertebrates: Initiation of geopolymer formation

Diagenetic alteration is critical for the preservation of fossil cuticles of plant and animal origin and to the formation of kerogen. The process takes place over millions of years, but the stage at which it is initiated is not known. Laboratory decay experiments were carried out on shrimps, scorpions and cockroaches to monitor changes in the chitin–protein of the arthropod cuticle and associated lipids. The cockroach and scorpion exoskeleton remained largely unaltered morphologically, but the shrimp experienced rapid decomposition within a month, which progressed through the 44 week duration of the experiment as revealed using electron microscopy. Mass spectrometry and ¹³C NMR (nuclear magnetic resonance) spectroscopy revealed the association of an n-alkyl component with labile lipids, such as fatty acids with up to 24 carbon atoms, which were incorporated into the decaying macromolecule. The scorpion and cockroach cuticle did not reveal the incorporation of additional lipids, indicating that decay is important in initiating in situ lipid association. This experiment provides evidence that lipids can become associated with carbohydrate and proteinaceous macromolecules during the very early stages of decay, representing the first stage in the transformation process that contributes to the aliphatic rich composition ubiquitous in organic fossils and kerogen.     

Quantification of adamantane in organic media via infrared attenuated total reflection spectroscopy

In the present study, the quantitative determination of the diamondoid compound adamantane in organic solvents via infrared attenuated total reflection (IR-ATR) spectroscopy at unmodified waveguide surfaces was established. Limits of detection (LOD) and quantification (LOQ) of adamantane in dichloromethane, hexane and carbon tetrachloride were determined. Quantitative IR-ATR measurements additionally facilitated the determination of adamantane solubility limit in dichloromethane, hexane and carbon tetrachloride. The developed analytical strategy further enabled the successful detection and quantification of adamantane in crude oil matrices. Consequently, IR-ATR spectroscopy provides a promising strategy for on ship and in situ diamondoid analysis in harsh real world environments.     

Early use by fish of a mitigation salt marsh,Humboldt Bay,California

Fish numbers and biomass in a mitigation salt marsh, Humboldt Bay, California, were examined from July 1981 to October 1982 and were compared with a nearby established marsh to determine whether the restored marsh provided adequate mitigation for habitat lost due to construction of a nearby marina. The use by fish of channels adjacent to the two marshes and the channel at the Woodley Island Marina construction site, for which mitigation was required, were also compared. The mitigation marsh, adjacent to Freshwater Slough channel, was 5.2 km from the marina site. Fishes were sampled by otter trawl, ichthyoplankton net, fixed channel nets, drop traps, and beach seines. Thirty-one fish species and two crab species were collected. Wide ranges in seasonal salinities and water temperatures, and differences in marsh elevation influenced fish use of the mitigation marsh area. The intertidal area of the mitigation marsh, dominated by euryhaline sticklebacks and topsmelts, did not replace intertidal and subtidal habitat lost by marina construction, which had more stable salinities and water temperatures and was used extensively by juvenile English sole.     

Difference in petrophysical properties between foliated and dilatant fault rocks in deeply buried clastics: The case of the Grès d'Annot Formation,SW French Alps

This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault‐rock types: (1) the foliated fault rocks of the Moutière‐Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra‐ and transgranular fracturing, pressure solution of quartz and feldspar grains and syn‐kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz‐ and calcite‐sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz‐sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.     

A conceptual model of valley incision, planation and terrace formation during cold and arid permafrost conditions of Pleistocene southern England

Staircases of gravelly river terrace deposits in southern England occupy valleys typically underlain by frost-susceptible and brecciated bedrocks. The valleys developed during the Quaternary by alternating episodes of (1) brecciation, incision and planation through the bedrock, forming wide low-relief erosion surfaces; and (2) aggradation in braidplains of gravel a few meters thick that bury the erosion surfaces. A conceptual model to account for some of the terraces proposes that brecciation resulted from ice segregation in the ice-rich layer in the upper meters of Pleistocene permafrost, making them vulnerable to fluvial thermal erosion and therefore predisposing the bedrock to planation. The low gradients of the valleys were adjusted such that rivers transferred fine materials out of the basins but lacked the competence to remove gravel, which therefore accumulated within floodplains. The model challenges the prevailing view of incision during climate transitions. It attributes incision and planation to very cold and arid permafrost conditions, when rivers had limited discharges and hillslopes supplied limited volumes of stony debris into valley bottoms.     

Formula of incipient velocity for flooded vehicles

With the climate change caused by global warming, the occurrence probability of urban flooding due to flash floods has increased gradually. Flush floods propagate rapidly, which can lead to significant hazard to human life and property. Flood hazard to vehicles has become more noticeable and frequent in recent years. Therefore, it is important to investigate the behaviour of vehicles on flooded streets or roads. In the current study, a formula has been derived to predict the incipient velocity of flooded vehicles according to the mechanical condition of sliding equilibrium. A series of flume experiments were conducted using three types of scaled die-cast model vehicles, with two scales being tested for each type of vehicle. The experimental data obtained for the small-scale model vehicles were used to determine the two parameters in the derived formula, and the prediction accuracy of this formula was validated using the experimental data obtained for the large-scale model vehicles. Finally, the corresponding incipient velocities under various incoming depths were computed using this formula for these three prototype vehicles. It is found that for a specified vehicle, the value of incipient velocity reaches its minimum as the incoming flow depth approaches the height of the vehicle, and the smaller and lighter vehicle like Mini Cooper is the easiest to start sliding in floodwaters. The results can be used as a preliminary assessment to define the hazard to vehicles parking on flooded streets or roads.     

An agent-based model for risk-based flood incident management

Effective flood incident management (FIM) requires successful operation of complex, interacting human and technological systems. A dynamic agent-based model of FIM processes has been developed to provide new insights which can be used for policy analysis and other practical applications. The model integrates remotely sensed information on topography, buildings and road networks with empirical survey data to fit characteristics of specific communities. The multiagent simulation has been coupled with a hydrodynamic model to estimate the vulnerability of individuals to flooding under different storm surge conditions, defence breach scenarios, flood warning times and evacuation strategies. A case study in the coastal town of Towyn in the United Kingdom has demonstrated the capacity of the model to analyse the risks of flooding to people, support flood emergency planning and appraise the benefits of flood incident management measures.