Parameter identification of framed structures using an improved finite element model‐updating method—Part I: formulation and verification

In this study, we formulate an improved finite element model‐updating method to address the numerical difficulties associated with ill conditioning and rank deficiency. These complications are frequently encountered model‐updating problems, and occur when the identification of a larger number of physical parameters is attempted than that warranted by the information content of the experimental data. Based on the standard bounded variables least‐squares (BVLS) method, which incorporates the usual upper/lower‐bound constraints, the proposed method (henceforth referred to as BVLSrc) is equipped with novel sensitivity‐based relative constraints. The relative constraints are automatically constructed using the correlation coefficients between the sensitivity vectors of updating parameters. The veracity and effectiveness of BVLSrc is investigated through the simulated, yet realistic, forced‐vibration testing of a simple framed structure using its frequency response function as input data. By comparing the results of BVLSrc with those obtained via (the competing) pure BVLS and regularization methods, we show that BVLSrc and regularization methods yield approximate solutions with similar and sufficiently high accuracy, while pure BVLS method yields physically inadmissible solutions. We further demonstrate that BVLSrc is computationally more efficient, because, unlike regularization methods, it does not require the laborious a priori calculations to determine an optimal penalty parameter, and its results are far less sensitive to the initial estimates of the updating parameters. Copyright © 2006 John Wiley & Sons, Ltd.     

Methodology for comparing source and plume remediation alternatives

It is often difficult at contaminated sites to decide whether remediation effort should be focused on the contaminant source, the dissolved plume, or on both zones. The decision process at these sites is hampered by a lack of quantitative tools for comparing remediation alternatives. A new screening-level mass balance approach is developed for simulating the transient effects of simultaneous ground water source and plume remediation. The contaminant source model is based on a power function relationship between source mass and source discharge, and it can consider partial source remediation at any time after the initial release. The source model serves as a time-dependent mass flux boundary condition to a new analytical plume model, where flow is assumed to be one dimensional, with three-dimensional dispersion. The plume model simulates first-order sequential decay and production of several species, and the decay rates and parent/daughter yield coefficients are variable functions of time and distance. This new method allows for flexible simulation of natural attenuation or remediation efforts that enhance plume degradation. The plume remediation effort may be temporary or delayed in time, limited in space, and it may have different chemical effects on different contaminant species in the decay chain.     

Response of the ionosphere–thermosphere system to magnetospheric processes

The magnetosphere–ionosphere–thermosphere system at high latitudes is strongly coupled via electric fields, particle precipitation, plasma and neutral outflows, and field-aligned currents. Although the climatology of the coupled system is fairly well established, our understanding of the variability of the disturbed state (weather) is rudimentary. This variability is associated with magnetic storms and substorms, nonlinear processes that operate over a range of spatial scales, time delays, and feedback mechanisms between the different domains. The variability and resultant structure of the ionosphere can appear in the form of propagating plasma patches and polar wind jets, pulsing ion and neutral polar winds, auroral and boundary blobs, and ionization channels associated with polar cap arcs, discrete auroral arcs, and storm-enhanced densities (SEDs). The variability and structure of the thermosphere can appear in the form of propagating atmospheric holes, neutral gas fountains, neutral density patches, and transient neutral jets. In addition, during periods of enhanced plasma convection, the neutral winds can become supersonic in relatively narrow regions of the polar cap. The spatial structure in the ionosphere–thermosphere system not only affects the local environment, but the cumulative effect of multiple structures may affect the global circulation and energy balance. A focused topical review of recent results in our modeling the variability and structure of the high-latitude ionosphere–thermosphere system is presented. This review was given at the Greenland Space Science Symposium (May 2007).     

The role of slab detachment processes in the opening of the western–central Mediterranean basins: some geological and geophysical evidence

A review of the geological and geophysical data from the central and western Mediterranean region and the present-day upper mantle structure derived from tomographic studies are utilized in order to define the Oligocene–Recent geodynamic evolution for the area. In line with previous work, we suggest that the Miocene–Quaternary opening of the western and central Mediterranean basins is the result of back-arc extension due to the roll back toward the southeast of a northwestward subducting African slab in a geodynamic setting pinned between the Alpine and Betic collisional zones. We find, however, that this general pattern is complicated by four different detachment events which occurred beneath the Alps (Early Oligocene), the Betic chain (Aquitanian), northern Africa (Langhian) and the Apennines (Late Miocene?–Pliocene). We show that each of these events determines a major tectonic reorganization within the European plate.     

An interval-valued fuzzy linear programming with infinite ��-cuts method for environmental management under uncertainty

In this study, an interval-valued fuzzy linear programming with infinite α-cuts (IVFLP-I) method is developed for municipal solid waste (MSW) management under uncertainty. IVFLP-I can not only tackle uncertainties expressed as intervals and interval-valued fuzzy sets, but also take all fuzzy information into account by discretizing infinite α-cut levels to the interval-valued fuzzy membership functions. Through adoption of the interval-valued fuzzy sets, IVFLP-I can directly communicate information of waste managers’ confidence levels over various subjective judgments into the optimization process. Compared to the existing methods in which only finite α-cut levels exist, IVFLP-I would have enhanced the robustness in the optimization efforts. A MSW management problem is studied to illustrate the applicability of the proposed method. Four groups of optimal solutions can be obtained through assigning different intervals of α-cut levels. The results indicate that wider intervals of α-cut levels could lead to a lower risk level of constraint violation associated with a higher system cost; contrarily, narrower intervals of α-cut levels could lead to a lower cost with a higher risk of violating the constraints. The solutions under different intervals of α-cut levels can support in-depth analyses of tradeoffs between system costs and constraint-violation risks.     

Altering Dissolved Oxygen to Determine Flow Conditions in Fractured Bedrock Wells

A new approach to locate transmissive fractures and decipher vertical borehole flow conditions in fractured crystalline bedrock wells is presented, which uses dissolved oxygen (DO) as a benign tracer. The method was tested in two fractured crystalline bedrock wells previously characterized by televiewer and flow meter logging under both ambient and stressed (slug test) conditions. The method entailed elevating wellbore DO concentrations by circulating water through showerheads or injection of compressed air. The DO dilution was used to locate inflowing fractures. Changes in the DO concentration with time were used to ascertain flow within the borehole and to locate outflowing fractures and stagnant zones. Flow rates were also estimated. Fractures detected by the method corresponded to those observed by televiewer logging and for the most part were comparable to flow meter results. Given the effectiveness, time‐efficiency and low cost, the method is a promising alternative to other methods currently in use to characterize transmissive fractures in wells.     

The role of biota in the initiation and growth of islands on the floodplain of the Okavango alluvial fan,Botswana

A group of islands of varying size on the floodplain of the Okavango alluvial fan, were studied to establish the processes which lead to the initiation and growth of islands. It was found that islands are initiated by the mound-building activities of the termite Macrotermes michaelseni. These termites import fine grained materials to use as a mortar for the construction of epigeal mounds. Their activities create a topographic feature, raised above the level of seasonal flooding, and also change the physical properties and nutrient status of the mound soil. Shrubs and trees are able to colonize these mounds, which results in increased transpiration. As a result, precipitation of calcite and silica from the shallow ground water occurs preferentially beneath the mounds, resulting in vertical and especially lateral growth, causing island expansion. © 1998 John Wiley & Sons, Ltd.     

In situ calcite U−Pb geochronology by high-sensitivity single-collector LA-SF-ICP-MS

Science China Earth Sciences - U?Pb geochronology of calcite using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) is an emerging method, with potential applications...