A new method for the generation of second-order random waves

In order to prevent the generation of spurious free sub- and superharmonics of random waves in a laboratory channel, the control signal for the wave board has to be derived according to a higher-order wave theory. An expression for this control signal has been derived with the perturbation method of multiple scales. It is much less complex and requires less computation time than the expressions obtained from the full second-order theory. The new method for second-order subharmonics was verified experimentally for waves with bichromatic and continuous first-order spectra. The data were analysed with the complex-harmonic principal-component analysis to reduce the influence of noise.     

Measurement of the redox speciation of iron in seawater by catalytic cathodic stripping voltammetry

Catalytic cathodic stripping voltammetry (CSV) preceded by adsorptive collection of complexes of 1-nitroso-2-napthol (NN) can be used to determine iron in seawater. It is shown here that iron(II) is effectively masked in the presence of 2,2-dipyridyl (Dp) so that iron(III) is measured selectively. The concentration of iron(II) is then calculated as the difference between the concentrations of reactive iron (Fe_R) in the absence and presence of 2 μM Dp, Fe_R being defined as that which was complexed by 20 μM NN at pH 6.9 in the presence of 1.8 mM H₂O₂ and 5 ppm sodium dodecyl sulphate. A 30 min reaction time was allowed for Dp to react with iron(II) in seawater prior to the determination of reactive iron(III) using the same conditions as used for Fe_R. Detection limits of 0.08 nM, 0.077 nM and 0.12 nM were obtained for Fe_R, iron(III) and iron(II), respectively, using a 60 s deposition time.The method was utilised to determine the redox speciation of iron in the northern North Sea. Concentrations of Fe_R ranged between 0.8 and 3.5 nM with nutrient-like depth profiles. Iron(II) was found to be present at concentrations up to 1.2 nM, the highest concentrations occurring in the upper 20 m of the water column.     

Risk of dike failure due to flow slides

Flow slides may affect the stability of dikes. A flow slide is an instability of a submerged slope caused by liquefaction of loose, (medium) fine sand. Whether a flow slide will occur depends on the properties of the sand, which are a function of its density, and the geometry of the slope, as determined by wave and current induced scour and sedimentation. The influence of sand properties and the geometry parameters on the risk of flow slides are discussed. The application of a flow slide prediction method to an example and a risk analysis is briefly discussed.     

The European vision for oceans and seas—Social and political dimensions of the Green Paper on Maritime Policy for the EU

The EU Green Paper on Maritime Policy is the European response to the new generation of ocean strategies based on science, technology and innovation aimed at new objectives, such as the strengthening of security and access to new resources. The European character of the proposal is found in the presence of social, cultural and historical elements, what is called the “European vision”. The viability of a European vision of the oceans and the idea of maritime empire as an extension of the current concept of empire within the general context of emerging ocean strategies are the elements offered up for debate on this European Union initiative.     

Transient biouptake flux and accumulation by microorganisms: The case of two types of sites with Langmuir adsorption

The uptake of a chemical species by an aquatic microorganism is modelled considering two kinds of sites where Langmuirian adsorption is followed by first order internalisation kinetics. Simpler models, such as only one internalisation route (while most of the adsorption takes place on non-internalising sites) or a linear isotherm for adsorption on one or both sites, become limiting cases of this double-Langmuirian model. The model considers the sites located on the spherical (or semi-spherical) surface of the organism, and takes diffusion from the medium into explicit account. The numerical solution for the internalisation flux shows a maximum. We provide an estimate for the time needed to reach a certain proximity to steady state. The transient solution confirms that the analytical expressions for the steady-state flux are usually valid and that the accumulated amounts reflect the impact of the short-time uptake. The Instantaneous Steady-State Approximation (ISSA), where an intercept of the linear regression of accumulated amount as a function of time is interpreted as an adsorbed amount, can be critically assessed with the transient numerical code for two cases: (i) when the total burden of metal on the cell is the input data and (ii) when an extraction procedure provides further information on the adsorbed and internalised amount.     

A community-wide intercomparison exercise for the determination of dissolved iron in seawater

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.     

Scaling analysis of deposition from turbidity currents

Many oil-bearing sedimentary deposits are formed by the settling of particles from turbidity currents. Modeling sedimentary processes that form these turbidites enables the calculation of properties such as extent, depth, porosity and permeability of hydrocarbon-bearing reservoirs. This paper estimates the extent and thickness of turbidites from the initial conditions of the turbidity flow. This is achieved by the application of scaling analysis of the partial differential equations that govern the dynamics of and deposition from turbidity currents. We apply the results of scaling analysis to five modern submarine fans. The predicted and actual values of the dimensions of the fan deposits match well. We then compare the derived results against tabulated sizes of ancient turbidites. The comparisons are good as long as we correctly identify the flow regimes in which the deposition took place. The good agreements observed in the two cases show that the estimates obtained using scaling analysis can provide useful first-guess values for the dimensions of the deposits.     

The expression of CYP1A,vitellogenin and zona radiata proteins in Atlantic salmon (Salmo salar) after oral dosing with two commercial PBDE flame retardant mixtures: absence of short-term responses

The short-term effects of the commercial PBDE flame retardant mixtures Penta-BDE and cta-BDE on the expression of cytochrome P450 1A (CYP1A), vitellogenin (Vtg) and zona radiata proteins (Zrp) were investigated in juvenile salmon (Salmo salar). For this purpose, groups of fish were dosed twice (oral intake at days I and 4) with 10 and 50 mg/kg body weight of both commercial mixtures. The fishes were sacrificed at day 7 (n = 5 for each group) and 14 (n = 6 for each group), and blood, liver, fillet, and brain were collected. Blanks and positive controls were also part of the experiment. The expressions of Vtg, Zrp, and CYPIA were measured with several techniques (EROD, ELISA, Western, Northern and Slot Blot). The values in the groups of fish treated with Penta-BDE or Octa-BDE did not significantly differ from the reference group for any of the parameters tested. In contrast, the positive control groups treated with estradiol-17beta for Vtg and Zrp expression, and beta-naphthoflavone for CYP1A expression did show a significant response, indicating the potential sensitivity of the fishes for the parameters measured. Since the results of the chemical analyses showed concentrations of a number of PBDE congeners in liver, fillet, and brain that were about three orders of magnitude above those of fish from the North Sea, it is concluded that the short-term toxicity of both commercial PBDE mixtures for these endpoints was low.     

黄鳍鲷LDH同工酶的组织特异性研究

以黄鳍鲷为材料进行两方面研究:（1）用聚丙烯酰胺凝胶电泳方法，对其肌肉，心脏，肝脏，血清，玻璃体，晶状体，脑等组织器官进行LDH同工酶分析比较，结果表明，不同组织中LDH的同工酶谱带不相同，存在着组织特异性：（2）用聚丙烯酰胺等电聚焦电泳法对其肌肉，血清的LDH同工酶进行分离 ，结果得到12－15条电泳区带，等电点范围在pH为3．65－9．58之间。     

The morphodynamic modelling of tidal sand waves on the shoreface

An artificial sand wave on the Dutch shoreface of the North Sea has been studied in conditions with relatively strong tidal currents in the range of 0.5 to 1 m/s and sediments in the medium sand size range of 0.2 to 0.5 mm. The sand wave is perpendicular to the tidal current and has a maximum height and length of the order of 5 m and 1 km, respectively. The sand wave is dynamically active and shows migration rates of the order of a few metres per year. A numerical morphodynamic model (DELFT3D model) has been used to simulate the morphological behaviour of the sand wave in the North Sea. This model approach is based on the numerical solution of the three-dimensional shallow water equations in combination with a surface wave propagation model (wind waves) and the advection–diffusion equation for the sediment particles with online bed updating after each time step. The model results show that the sand wave grows in the case of dominant bed-load transport (weak tidal currents; relatively coarse sediment; small roughness height; low waves) and that the sand wave decays in the case of dominant suspended transport (strong currents, relatively fine sediment, large roughness height; storm waves).