Morphology of the Itapeva to Tramandai transgressive dunefield barrier system and mid‐ to late Holocene sea level change

The surface morphology of the transgressive dunefield barrier extending from Itapeva to Tramandai along the northern littoral of Rio Grande do Sul, is examined and an attempt is presented to link morphological changes across the barrier to Holocene sea level changes. The 4·5 km wide Holocene barrier displays two typical morphologies: an inner part dominated by large‐scale, continuous alongshore, overlapping dunefield phases comprising sand sheets, dunes, deflation plains and precipitation ridges; and an outer part dominated by discontinuous, medium‐ to small‐scale, triangular to lobate transgressive dunefield phases, cut by both active and relict (palaeo‐) creeks or washouts. Holocene sea level in the region rose to c. +1 to +3 m above present reaching a maximum around 5100 years bp and then progressively fell to the present level. We argue that the effect on barrier development was to suppress the development of a drainage system during the rising and maximum stages, and encourage the development of an organized drainage system in the form of regularly spaced washouts during the falling period, and that this change in sea level from rising to falling therefore produced the large‐scale differences in barrier morphology. Copyright © 2006 John Wiley & Sons, Ltd.     

In Situ Measurement of Electro-Osmotic Fluxes and Conductivity Using Single Wellbore Tracer Tests

Electro-osmosis (EO), the movement of water through porous media in response to an electric field, offers a means for extracting contaminated ground water from fine-grained sediments, such as clays, that are not easily amenable to conventional pump-and-treat approaches. The EO-induced water flux is proportional to the voltage gradient in a manner analogous to the flux dependence on the hydraulic gradient under Darcy's law. The proportionality constant, the soil electro-osmotic conductivity or k_eo, is most easily measured in soil cores using bench-top tests, where flow is one-dimensional and interfering effects attributable to Darcy's law can be directly accounted for. In contrast, quantification of EO fluxes and k_eo in the field under deployment conditions can be difficult because electrodes are placed in ground water wells that may be screened across a heterogeneous mixture of lithologies. As a result, EO-induced water fluxes constitute an approximate radial flow system that is superimposed upon a Darcy flow regime through permeable pathways that may or may not be coupled with hydraulic head differences created by the EO-induced water fluxes. A single well comparative tracer test, which indirectly measures EO fluxes by comparing wellbore tracer dilution rates between background and EO-induced water fluxes, may provide a means for routinely quantifying the efficacy of EO systems in such settings. EO fluxes measured in field tests through this technique at a ground water contamination site were used to estimate a mean k_eo value through a semianalytic line source model of the electric field. The resulting estimate agrees well with values reported in the literature and with values obtained with bench-top tests conducted on a soil core collected in the test area.     

Carbonate-hosted siliceous crust type mineralization of Carnic Alps (Italy-Austria)

A carbonate-hosted stratabound siliceous crust type (SCT) mineralization (base metal sulphides, barite, fluorite) occurs over large areas of Carnic Alps and Karawanken in the Eastern Alps. It concerns a pervasively silicified lithological unit, up to some tens of metres thick, which caps the unconformity landscapes developed on epicontinental Devonian–Dinantian carbonates. The SCT mineralization is directly overlaid by different transgressive siliciclastic sediments, which range from Lower Carboniferous to Lower Permian. The presence of fragments of the SCT mineralization in the transgressive siliciclastic sediment bounds its whole lithological evolution within a short stratigraphic interval of Lower Carboniferous age. Selected features of the regional and lithostratigraphic setting are discussed. The chemical characterisation is based on the statistical evaluation of compositional data of 581 selected samples. Three significant groups of elements have been distinguished: (1) the hydrological and metasomatically active elements (Si, Ba, F), which show a strong negative correlation amongst themselves and characterise the silica-saturated aqueous solutions; (2) the terrigenous elements (Al₂O₃, K₂O, Fe_tot, TiO₂, B, Be, Ce, La, Nb, V, Y, Zr), which suggest a continental margin environment for silica deposition; (3) the sulphide metals (Cu, Pb, Zn, Ni, Sb, As, Hg, Cd), which define the metalliferous signature of the SCT mineralization.Some consistent, but still debatable genetic aspects of the SCT mineralization are as follow: (1) silica may be supplied by illitization of clay-rich basinal sediments during their diagenesis. δ¹⁸O of microcrystalline quartz ranges from +18.5‰ and +24.6‰ and is very similar to δ¹⁸O of authigenic quartz deriving from diagenetic processes of illitization of clay-rich basinal sequences. (2) The diagenetic evolution of these sediments may trigger off the movement of silica-rich marine pore waters. δ³⁴S of barite ranges from +15.5‰ to +19.3‰ with an average of +17.7‰ and are in good agreement with δ³⁴S of sulphate in ocean waters of Upper Devonian–Lower Carboniferous age. (3) A convective hydrological system, connected with sinsedimentary transtensive tectonics, active in the Carnic Alps since the Frasnian, may be the transport mechanism of aqueous solutions. (4) A weak drop in pH in the dominant carbonate environment represents the conditions for silica precipitation.SCT mineralization, showing persistent, independent and distinct characters, occurs over large areas also in other sites of the Alpine belt and outside Italy and Austria. Therefore, it points to important markers for some sedimentary sequences as well as to a worldwide significant cyclic metallogenic event. It represents a new ore deposit-type within the carbonate-hosted mineralization.     

Peralkaline acid tendencies in Gran Canaria (Canary Islands)

The study of a volcanic series from the island of Gran Canaria (Canary Islands) in which alkaline and peralkaline, saturated and undersaturated rocks coexist, is reported here. Materials with high volatile content (ignimbritic trachytes) were first emitted and the series ended with the eruption of phonolitic lavas. The average peralkalinity index in these rocks is typically about 1.0 and, therefore, peralkaline rocks coexist with non-peralkaline ones. However, a maximum in peralkalinity is found in the ignimbritic rocks of the lower part of the series. In spite of the evident acid peralkaline tendencies of these rocks, it does not seem appropriate to classify them as pantellerites or comendites. Nor are they consistent with the genetic processes proposed for rocks of similar composition and oceanic environment.The crystallization of the feldspars controls the variation trends among the different magmas but the fractionation alone does not sufficiently explain the genesis of successive fluids. Various factors seem to point to the important role which a gas-transfer process causing a geochemical stratification inside the magmatic chamber may have played.The occurrence of peralkaline silicics at Gran Canaria, which is located for away from the active Mid-Atlantic ridge, is not related to transitional basalts. These rocks are a deviation from the main undersaturated alkalic trend which characterizes the volcanism of the Canary Islands, their genesis being related to the realization of favourable local volcanic conditions.     

Cretaceous stratigraphy and palaeoenvironments of the Southern Petén Basin, Guatemala

The Cretaceous deposits of the Southern Petén Basin, an oil-producing province, are located to the south of the Yucatan Platform and to the east of the Chiapas Carbonate Platform of Mexico. The succession in the southern part of this basin has been studied both in wells and at outcrop by microfacies analysis. It is composed of 5000 m of shallow marine carbonates and evaporites with a few thin layers of pelagic limestones rich in organic carbon and planktic foraminifera deposited during peak transgressions or maximum flooding. The sedimentation of this thick succession was not continuous, and the section is punctuated by subaerial erosional bounding surfaces and a single hardground which marks the final drowning of the carbonate platform during the late Maastrichtian. New age determinations have been obtained on the basis of planktic and benthic foraminifera from the Aptian to Santonian Cobán Formation, D, C, B and A Members. Cobán C (Albian) and B (Cenomanian) Members are the present oil reservoirs. The rudist and alveolinid limestones of late Campanian and Maastrichtian age referred to the Campur Formation in the Southern Petén Basin are here reassigned to the Angostura Formation, as recognized in the Chiapas area. The Actela Formation is defined here to encompass the limestone breccia deposits that occur at the Cretaceous–Tertiary boundary and extend into the Parvularugoglobigerina eugubina Zone of early Danian age. The D, C, B and A Members of the Cobán Formation and the Angostura Formation represent second order transgressive and regressive trends in a passive margin area where the deposits indicate a succession of various environments, including fluviatile, salinas, shallow marine carbonate platform, outer shelf and intrashelf basin. High subsidence rates, sea-level changes and tectonic uplift controlled the sedimentation.

Abstract

Les formations crétacées du sud-est du Bassin du Petén, région pétrolière du nord du Guatemala, sont situées au Sud du Yucatan et à l'Est du Chiapas au Mexique. Ces sédiments ont été étudiés à la fois dans deux puits et à l'affleurement par l'analyse des microfaciès. Cet ensemble sédimentaire est composé de 5000 m de carbonates de plate-forme de faible profondeur et d'évaporites, dans lesquels s'intercalent de minces couches de calcaires pélagiques riches en matière organique et en foraminifères planctoniques. Ces calcaires pélagiques se sont déposés lors des maximums de transgressions. La sédimentation de cette épaisse série n'est pas continue et est ponctuée par quelques surfaces d'érosion sub-aérienne et une surface durcie qui souligne l'ennoyage définitif de la plate-forme carbonatée au Maastrichtien terminal. De nouvelles datations ont été obtenues sur la formation Cobán et ses membres D, C, B et A qui s'étagent de l'Aptien au Santonien. Les membres C (albien) et B (cénomanien) constituent les réservoirs productifs. Les calcaires à rudistes et à alveolinidés du Campanien supérieur–Maastrichtien ont été appelés à tort au Petén formation Campur. Ils doivent, selon nous, être attribués à la formation Angostura comme au Chiapas voisin, où affleurent des faciès comparables et de même âge. Une nouvelle formation est créée (formation Actela) pour les brèches calcaires de la limite Crétacé–Tertiaire et de la Zone à Eugubina du Danien inférieur. Les membres D, C, B, A de la formation Cobán et la formation Angostura représentent des cycles transgressifs–régressifs de deuxième ordre. Sur cette marge passive du Petén, les dépôts correspondent à des environnements variés comme des terres émergées soumises à une altération karstique et à des dépôts fluviatiles, des salinas, des plates-formes carbonatées marines, des shelf externes et des bassins intra plate-forme. La sédimentation a été, ici, contrôlée par une forte vitesse de subsidence, les variations du niveau marin et des soulèvements tectoniques.     

Plio-Quaternary volcanotectonic activity in the northern sector of the Main Ethiopian Rift: relationships with oblique rifting

Deformation and magmatism within the 90 km wide northern Ethiopian Rift system is concentrated along a narrow zone - the Wonji Fault Belt. Two key areas (the Nazret-Dera and Asela-Ziway areas), located along the eastern margin of the north-northeast to northeast trending Main Ethiopian Rift, have been investigated in order to reconstruct the recent tectonomagmatic evolution of the northern branch of the Main Ethiopian Rift. In these areas, Early Pleistocene volcanic products (Wonji Group) overlie Pliocene volcanic rocks (Eastern Margin Unit). Detailed stratigraphical reconstructions have revealed the presence of several tectonomagmatic units which can be correlated between the two study areas. The stratigraphical and petrological study of these units outlined (1) the bimodal composition (basalts-pantellerites) of the oldest and youngest units and the unimodal character (pantellerites) of the products erupted during the intervening period; (2) the mainly fissural origin of the ignimbrites and oldest basalts; and (3) a mafic/felsic volumetric ratio of 1:5.The geological data suggest that, around the Pliocene-Quaternary boundary, a change in the stress field occurred in this Main Ethiopian Rift sector, passing from a direction of extension roughly orthogonal to the rift shoulders, to oblique rifting related to an east-west trending extension. In this framework the change in the style of volcanism observed in the Nazret-Dera and Asela-Ziway areas can be related to the change of the stress field. A new geodynamic model is presented for the Late Pliocene to Recent evolution of this sector of the Main Ethiopian Rift. According to this model, a large volume of rhyolitic products was erupted during an oblique rifting phase, following a previous period of pure extension. The change in the tectonic regime favoured partial melting of the underplated basalts as a decrease in the pressure and an elevation of isotherms occurred.     

On gamma-ray emission from CYG X-2

We discuss the importance of hard X- and gamma-ray emission from thermal X-ray sources to obtain a more realistic picture of these objects.In particular, we show that the inverse Compton effect is a possible mechanism of gamma-ray emission from sources of this kind and apply our consideration to the specific case of Cyg X-2.