The Holocene tephrostratigraphic record of Lake Shkodra (Albania and Montenegro)

Two cores were recovered in the southeastern part of Lake Shkodra (Montenegro and Albania) and sampled for identification of tephra layers. The first core (SK13, 7.8 m long) was recovered from a water depth of 7 m, while the second core (SK19, 5.8 m long) was recovered close to the present‐day shoreline (water depth of 2 m). Magnetic susceptibility investigations show generally low values with some peaks that in some cases are related to tephra layers. Naked‐eye inspection of the cores allowed the identification of four tephra layers in core SK13 and five tephra layers in core SK19. Major element analyses on glass shards and mineral phases allowed correlation of the tephra layers between the two cores, and their attribution to six different Holocene explosive eruptions of southern Italy volcanoes. Two tephra layers have under‐saturated composition of glass shards (foiditic and phonolitic) and were correlated to the AD 472 and the Avellino (ca. 3.9 cal. ka BP) eruptions of Somma‐Vesuvius. One tephra layer has benmoreitic composition and was correlated to the FL eruption of Mount Etna (ca. 3.4 cal. ka BP). The other three tephra layers have trachytic composition and were correlated to Astroni (ca. 4.2 cal. ka BP), Agnano Monte Spina (ca. 4.5 cal. ka BP) and Agnano Pomici Principali (ca. 12.3 cal. ka BP) eruptions of Campi Flegrei. The ages of tephra layers are in broad agreement with eight ¹⁴C accelerator mass spectrometric measurements carried out on plant remains and charcoal from the lake sediments at different depths along the two cores. The recognition of distal tephra layers from Italian volcanoes allowed the physical link of the Holocene archive of Lake Shkodra to other archives located in the central Mediterranean area and the Balkans (i.e. Lake Ohrid). Five of the recognised tephra layers were recognised for the first time in the Balkans area, and this has relevance for volcanic hazard assessment and for ash dispersal forecasting in case of renewed explosive activity from some of the southern Italy volcanoes. Copyright © 2009 John Wiley & Sons, Ltd.     

An integrated procedure to evaluate hydrological models

The growing concern for health‐related problems deriving from pollutants leaching is driving national and international administrations to support the development of tools for evaluating the effects of alternate management scenarios and identifying vulnerable areas. Cropping systems models are powerful tools for evaluating leachates under different environmental, social, and management conditions. As percolating water is the transport vehicle for pollutants transport in soil, a reliable evaluation of water balance models is a fundamental prerequisite for investigating pesticides and nitrate fate. As specific approaches for the evaluation of multi‐layer evolution of state variables are missing, we propose a fuzzy‐based, integrated indicator (I_SWC: 0, best; 1, worst) for a comprehensive evaluation of soil water content (SWC) simulations. We aggregated error metrics with others quantifying the homogeneity of errors across different soil layers, the capability of models to reproduce complex dynamics function of both time and soil depth, and model complexity. We tested I_SWC on a sample dataset where the models CropSyst and CERES‐Wheat were used to simulate SWC for winter wheat systems. I_SWC revealed that, in the explored conditions, the global assessment of the two models' performances allowed identification of CropSyst as the best (average I_SWC = 0·441, with a value of 0·537 obtained by CERES‐Wheat), although each model prevailed for some of the metrics. CropSyst presented the highest accuracy (average agreement module = 0·400), whereas CERES‐Wheat's accuracy was slightly worse, although achieved with a simplified modelling approach (average Akaike Information Criterion = − 230·44), thereby favouring large‐area applicability. The non‐univocal scores achieved by the models for the different metrics support the use of multi‐metric evaluation approaches for quantifying the different aspects of water balance model performances. Copyright © 2010 John Wiley & Sons, Ltd.     

GIS-based assessment of landslide susceptibility on the base of the Weights-of-Evidence model

The major scope of the study is the assessment of landslide susceptibility of Flysch areas including the Penninic Klippen in the Vienna Forest (Lower Austria) by means of Geographical Information System (GIS)-based modelling. A statistical/probabilistic method, referred to as Weights-of-Evidence (WofE), is applied in a GIS environment in order to derive quantitative spatial information on the predisposition to landslides. While previous research in this area concentrated on local geomorphological, pedological and slope stability analyses, the present study is carried out at a regional level. The results of the modelling emphasise the relevance of clay shale zones within the Flysch formations for the occurrence of landslides. Moreover, the distribution of mass movements is closely connected to the fault system and nappe boundaries. An increased frequency of landslides is observed in the proximity to drainage lines, which can change to torrential conditions after heavy rainfall. Furthermore, landslide susceptibility is enhanced on N-W facing slopes, which are exposed to the prevailing direction of wind and rainfall. Both of the latter geofactors indirectly show the major importance of the hydrological conditions, in particular, of precipitation and surface runoff, for the occurrence of mass movements in the study area. Model performance was checked with an independent validation set of landslides, which are not used in the model. An area of 15% of the susceptibility map, classified as highly susceptible, “predicted” 40% of the landslides.     

Depositional mechanics of turbulent nuées ardentes (surges) from their grain sizes

The ability of turbulent nuées ardentes (surges) to transport coarse pyroclasts has been questioned on the basis that settling velocities of coarse fragments in the deposits are much too high for them to have been supported by turbulence in a dilute gas suspension. A computer model is used to evaluate the settling velocity of pyroclasts in suspensions of varying concentration and temperature. Since suspension of grains in low-concentration surges occurs if the shear velocity exceeds the settling velocity, the shear velocities related to the 16th and 84th percentiles, and the mean of the grain-size distribution are compared in surge deposits of the Vulsini, with the shear velocity necessary to move the coarsest grain on the bed surface (the Shields criterion). The results show that the settling velocities do not vary significantly in gaseous suspensions having volume concentrations lower than 15%, and that an increase in concentration to 25% is not sufficient to decrease the settling velocity of the coarser fraction, if it represents flow shear velocity. It is shown that the settling velocity of the mean grain size (M _z ) best depicts the shear velocity of a dilute turbulent suspension. Applying the results to the May 1902 paroxysmal nuées ardentes of Mount Pelée shows that the estimated mean velocities are well within the observed velocities, and sufficient to support all the clasts in dilute, turbulent suspensions.     

Reduction seismic response with heavily-damped vibration absorbers

It is shown that two of the damping ratios of certain systems composed of a building and a small attachment in resonance are given by the average of the damping ratios of the two independent components. Based on this fact and the fact that the seismic response of a building can always be reduced by increasing its damping, it is demonstrated that the attachment of a small heavily-damped system in resonance can increase the damping of a building and reduce thus its response to earthquake excitations. Numerical solutions are presented to confirm the demonstration, and recommendations are given to calculate the parameters of such systems.     

Travel-time residuals and three-dimensional velocity structure of Italy

Jeffreys-Bullen P and PKP travel-time residuals observed at more than 50 seismic stations distributed along Italy and surrounding areas in the time interval 1962–1979, indicate the complex velocity pattern of this region. Strong lateral velocity inhomogeneities and low velocity zones are required to explain the observed pattern of residuals. In particular, late arrivals of about 1 sec are observed in the Apenninic mountain range, requiring both greater crustal thickness and low velocity layers, coherent with seismic refraction data and surface wave dispersion measurements. The seismic stations located in the Western and Eastern Alps indicate the presence of high velocities. In the Western Alps the strong azimuthal variation of residuals and the high values of early arrivals have a close relationship to the Ivrea body, an intrusive crustal complex characterized by a velocity as high as 7–7.2 km/sec.A travel-time inversion performed with theAki et al. (1977) block model, confirms the peculiar characteristics and the sharp variations in the lithosphere of the whole Italian region, with values of velocity perturbations between many adjacent blocks, ranging in size from 50 to 100 km, and independent from the earth parametrization chosen, reaching values up to 10% in the lithospheric part and 5% in the asthenosphere. 3-D inversion requires also high velocity along the Tyrrhenian coastal margin, equivalent to an uprise of major crustal and lithospheric discontinuities along this part of the Italian peninsula. Moreover low velocity material must be present in the northern part of the Adriatic foreland, in the lithosphere-asthenosphere system, closely related to the stress and seismicity pattern, and the lateral bending of the lithosphere in the same region.