Guiding ecological principles for marine spatial planning

The declining health of marine ecosystems around the world is evidence that current piecemeal governance is inadequate to successfully support healthy coastal and ocean ecosystems and sustain human uses of the ocean. One proposed solution to this problem is ecosystem-based marine spatial planning (MSP), which is a process that informs the spatial distribution of activities in the ocean so that existing and emerging uses can be maintained, use conflicts reduced, and ecosystem health and services protected and sustained for future generations. Because a key goal of ecosystem-based MSP is to maintain the delivery of ecosystem services that humans want and need, it must be based on ecological principles that articulate the scientifically recognized attributes of healthy, functioning ecosystems. These principles should be incorporated into a decision-making framework with clearly defined targets for these ecological attributes. This paper identifies ecological principles for MSP based on a synthesis of previously suggested and/or operationalized principles, along with recommendations generated by a group of twenty ecologists and marine scientists with diverse backgrounds and perspectives on MSP. The proposed four main ecological principles to guide MSP—maintaining or restoring: native species diversity, habitat diversity and heterogeneity, key species, and connectivity—and two additional guidelines, the need to account for context and uncertainty, must be explicitly taken into account in the planning process. When applied in concert with social, economic, and governance principles, these ecological principles can inform the designation and siting of ocean uses and the management of activities in the ocean to maintain or restore healthy ecosystems, allow delivery of marine ecosystem services, and ensure sustainable economic and social benefits.     

A comparison of the main methods for estimating probabilities of extreme still water levels

Sea-level return periods are estimated at 18 sites around the English Channel using: (i) the annual maxima method; (ii) the r-largest method; (iii) the joint probability method; and (iv) the revised joint probability method. Tests are undertaken to determine how sensitive these four methods are to three factors which may significantly influence the results; (a) the treatment of the long-term trends in extreme sea level; (b) the relative magnitudes of the tidal and non-tidal components of sea level; and (c) the frequency, length and completeness of the available data. Results show that unless sea-level records with lengths of at least 50 years are used, the way in which the long-term trends is handled in the different methods can lead to significant differences in the estimated return levels. The direct methods (i.e. methods i and ii) underestimate the long (> 20 years) period return levels when the astronomical tidal variations of sea level (relative to a mean of zero) are about twice that of the non-tidal variations. The performance of each of the four methods is assessed using prediction errors (the difference between the return periods of the observed maximum level at each site and the corresponding data range). Finally, return periods, estimated using the four methods, are compared with estimates from the spatial revised joint probability method along the UK south coast and are found to be significantly larger at most sites along this coast, due to the comparatively short records originally used to calibrate the model in this area. The revised joint probability method is found to have the lowest prediction errors at most sites analysed and this method is recommended for application wherever possible. However, no method can compensate for poor data.     

Ship hull drag reduction using bottom air injection

The idea of bottom air injection to reduce ship hull resistance is not new. Early patents envisioned planing hull applications. Recent planing hull tests speed realized an increase of 7–12 knots. River barges and ship fitted with an air injection system results are presented to show a 10–15% reduction in the frictional resistance. Graphs for making initial estimates for displacement hulls with bottom air injection are presented. It is clear from these results that improvements in high speed planing catamarans and full form hull resistance can be realized by using bottom air injection.     

The Batu Hijau porphyry copper-gold deposit, Sumbawa Island, Indonesia

The Batu Hijau porphyry Cu---Au deposit lies in southwest Sumbawa Island, Indonesia. It is a world-class porphyry Cu deposit in an island are setting, and is typical of this deposit type in most features, including igneous association, morphology, hydrothermal alteration and mineralisation style.The region was not previously recognised as a porphyry Cu province; disseminated Cu sulphides were first recognised in float samples in southwest Sumbawa in 1987. Associated stream sediment sampling identified a broad area of anomalous Au and Cu in an area of greater than 5 km² around Batu Hijau, including 169 ppb Au in BLEG samples and 580 ppm Cu in stream silts 1 km from the deposit. Mineralisation in bedrock at surface contains > 0.1 wt % Cu and > 0.1 ppm Au over an area of 0.6 km × 1.2 km, including a zone 300 m × 900 m containing > 0.3 wt % Cu. Areas with elevated Mo (> 30 ppm) form a distinctive annulus around this Cu-rich zone.Batu Hijau mineralisation is hosted in a tonalite intrusive complex, and diorite and metavolcanic wallrocks. There are no post-mineralisation igneous intrusions or breccia pipes within the deposit. The main tonalite intrusion forms a stock in the centre of the deposit, where it generally displays intensely pervasive potassic (biotite with magnetite-quartz) alteration and hosts most of the higher grade mineralisation. Younger tonalite dykes intruding the centre of this stock are generally less altered and mineralised than the older tonalite.The core zone of potassic alteration grades outward into extensive propylitic alteration (chlorite-epidote), with both variably overprinted by widespread fracture controlled intermediate argillic alteration (sericite-chlorite), and minor phyllic (sericite-pyrite) and sodic (albite) alteration. Argillic (sericite-kaolinite) and advanced argillic (kaolinite-alunite-pyrophyllite) assemblages occur near surface.Copper and Au grades within the orebody show a positive correlation with quartz stockwork intensity, although disseminated Cu sulphides are also common. Chalcopyrite and bornite are the principle hypogenal minerals, with minor chalcocite. Oxidation extends to a depth of 5 m to 85 m below surface across the deposit, and is underlain by weak supergene mineralisation. Drill testing of the deposit down to 650 m below surface reveals a single cylindrical to conical orebody of 334 million tonnes grading 0.8 wt % Cu and 0.69 gm per tonne Au; the depth extent of mineralisation is unknown.     

Some effects of tectonic recrystallisation on fluid inclusions in vein quartz

Filling temperature data obtained from tectonic vein quartz varies according to the state of intracrystalline deformation. Strain free domains within grains exhibit abundant primary fluid inclusions, from which internally consistent temperatures are recorded. The onset of optical features associated with intracrystalline deformation by dislocation creep is accompanied by a decrease in the number of fluid inclusions and an increase of filling temperatures. At higher states of strain tectonic recrystallisation, evidenced by the formation of new subgrains, leads to the complete destruction of inclusion arrays. Empty cavities are swept out of the new grains during recrystallisation, into subgrain walls. Heterogeneous deformation of vein quartz at the intracrystalline level may be due in part to selective hydrolytic weakening in areas where fluid inclusions have leaked and thereby increased the structural water content.     

Mining exploitation influence range

Mining exploitation has a negative impact on the natural environment. Voids created in the rockmass result in displacements and deformations of land surface. During planning and conducting the exploitation, the range of exploitation influence in the form of linear deformations is being determined. On the basis of mining-geological parameters of exploitation, the exploitation range of influences is calculated. According to the literature, many different ranges of exploitation influences can be determined depending on what has been the purpose of it. Different types of exploitation influence ranges can be distinguished, such as theoretical, damage or measurable. In the paper, the matters connected with determining those three types of the influence range are taken under consideration. The comparison of magnitudes of determined influence ranges is illustrated with two practical examples.     

Sediment waves on the Moroccan continental rise

A nearly continuous zone of sediment waves is present on the lower continental rise off western Morocco which parallels the regional bathymetric trends. The individual sediment waves within the zone migrate upslope with time and, in general, also trend parallel to the regional bathymetric contours. These observations suggest that geostrophic contour currents are responsible for the formation of sediment waves. Physical oceanographic measurements and sea-floor photographs indicate only a very weak bottom circulation in this region. This suggests either that strong bottom currents are not essential for the formation of sediment waves or that relatively stronger bottom currents flowed along the continental margin of Morocco in the recent past. Turbidity flows may also influence the distribution of these sediment waves.     

Oxygen isotope salt effects at high pressure and high temperature and the calibration of oxygen isotope geothermometers

The influence of NaCl, CaCl₂, and dissolved minerals on the oxygen isotope fractionation in mineral-water systems at high pressure and high temperature was studied experimentally. The salt effects of NaCl (up to 37 molal) and 5-molal CaCl₂ on the oxygen isotope fractionation between quartz and water and between calcite and water were measured at 5 and 15 kbar at temperatures from 300 to 750°C. CaCl₂ has a larger influence than NaCl on the isotopic fractionation between quartz and water. Although NaCl systematically changes the isotopic fractionation between quartz and water, it has no influence on the isotopic fractionation between calcite and water. This difference in the apparent oxygen isotope salt effects of NaCl must relate to the use of different minerals as reference phases. The term oxygen isotope salt effect is expanded here to encompass the effects of dissolved minerals on the fractionations between minerals and aqueous fluids. The oxygen isotope salt effects of dissolved quartz, calcite, and phlogopite at 15 kbar and 750°C were measured in the three-phase systems quartz-calcite-water and phlogopite-calcite-water. Under these conditions, the oxygen isotope salt effects of the three dissolved minerals range from ∼0.7 to 2.1‰. In both three-phase hydrothermal systems, the equilibrium fractionation factors between the pairs of minerals are the same as those obtained by anhydrous direct exchange between each pair of minerals, proving that the use of carbonate as exchange medium provides correct isotopic fractionations for a mineral pair.When the oxygen isotope salt effects of two minerals are different, the use of water as an indirect exchange medium will give erroneous fractionations between the two minerals. The isotope salt effect of a dissolved mineral is also the main reason for the observation that the experimentally calibrated oxygen isotope fractionations between a mineral and water are systematically 1.5 to 2‰ more positive than the results of theoretical calculations. Dissolved minerals greatly affect the isotopic fractionation in mineral-water systems at high pressure and high temperature. If the presence of a solute changes the solubility of a mineral, the real oxygen isotope salt effect of the solute at high pressure and high temperature cannot be correctly derived by using the mineral as reference phase.