Interpretation of cone penetration results in multilayered soils

A simple approximate analysis is presented for interpretation of cone penetration results when the cone resistance is affected by layering of soils with different stiffnesses. It is argued that the cone resistance senses the presence of a nearby layer elastically, and an approximate elastic analysis is developed to quantify the effect. Good comparisons with calibration chamber experimental results are found.     

The Kwakshua Watersheds Observatory,central coast of British Columbia,Canada

The Kwakshua Watersheds Observatory (KWO) is an integrative watersheds observatory on the coastal margin of a rain-dominated bog-forest landscape in British Columbia (BC), Canada. Established in 2013, the goal of the KWO is to understand and model the flux of terrestrial materials from land to sea – the origins, pathways, processes and ecosystem consequences – in the context of long-term environmental change. The KWO consists of seven gauged watersheds and a network of observation sites spanning from land to sea and along drainage gradients within catchments. Time-series datasets include year-round measurements of weather, soil hydrology, streamflow, aquatic biogeochemistry, microbial ecology and nearshore oceanographic conditions. Sensor measurements are recorded every 5 min and water samples are collected approximately monthly. Additional observations are made during high-flow conditions. We used remote sensing to map watershed terrain, drainage networks, soils and terrestrial ecosystems. The watersheds range in size from 3.2 to 12.8 km², with varying catchment characteristics that influence hydrological and biogeochemical responses. Despite local variation, the overall study area is a global hotspot for yields of dissolved organic carbon, dissolved organic nitrogen and dissolved iron at the coastal margin. This observatory helps fill an important gap in the global network of observatories, in terms of spatial location (central coast of BC), climate (temperate oceanic), hydrology (very high runoff, pluvial regime), geology (igneous intrusive, glacially scoured), vegetation (bog rainforest) and soils (large stores of organic carbon).     

Surf zone characterization from Unmanned Aerial Vehicle imagery

We investigate the issues and methods for estimating nearshore bathymetry based on wave celerity measurements obtained using time series imagery from small unmanned aircraft systems (SUAS). In contrast to time series imagery from fixed cameras or from larger aircraft, SUAS data are usually short, gappy in time, and unsteady in aim in high frequency ways that are not reflected by the filtered navigation metadata. These issues were first investigated using fixed camera proxy data that have been intentionally degraded to mimic these problems. It has been found that records as short as 50 s or less can yield good bathymetry results. Gaps in records associated with inadvertent look-away during unsteady flight would normally prevent use of the required standard Fast Fourier Transform methods. However, we found that a full Fourier Transform could be implemented on the remaining valid record segments and was effective if at least 50% of total record length remained intact. Errors in image geo-navigation were stabilized based on fixed ground fiducials within a required land portion of the image. The elements of a future method that could remove this requirement were then outlined. Two test SUAS data runs were analyzed and compared to survey ground truth data. A 54-s data run at Eglin Air Force Base on the Gulf of Mexico yielded a good bathymetry product that compared well with survey data (standard deviation of 0.51 m in depths ranging from 0 to 4 m). A shorter (30.5 s) record from Silver Strand Beach (near Coronado) on the US west coast provided a good approximation of the surveyed bathymetry but was excessively deep offshore and had larger errors (1.19 m for true depths ranging from 0 to 6 m), consistent with the short record length. Seventy-three percent of the bathymetry estimates lay within 1 m of the truth for most of the nearshore.     

Highly depleted oceanic lithosphere in the Rheic Ocean: Implications for Paleozoic plate reconstructions

The Rheic Ocean formed at ca. 500 Ma, when several peri-Gondwanan terranes (e.g. Avalonia and Carolinia) drifted from the northern margin of Gondwana, and were consumed during the Late Carboniferous collision between Laurussia and Gondwana, a key event in the formation of Pangea. Several mafic complexes ranging in age from ca. 400–330 Ma preserve many of the lithotectonic and/or chemical characteristics of ophiolites. They are characterized by anomalously high εNd values that are typically either between or above the widely accepted model depleted mantle curves. These data indicate derivation from a highly depleted (HD) mantle and imply that (i) the mantle source of these complexes displays time-integrated depletion in Nd relative to Sm, and (ii) depletion is the result of an earlier melting event in the mantle from which basalt was extracted. The extent of mantle depletion indicates that this melting event occurred in the Neoproterozoic, possibly up to 500 million years before the Rheic Ocean formed. If so, the mantle lithosphere that gave rise to the Rheic Ocean mafic complexes must have been captured from an adjacent, older oceanic tract. The transfer of this captured lithosphere to the upper plate enabled it to become preferentially preserved. Possible Mesozoic–Cenozoic analogues include the capture of the Caribbean plate or the Scotia plate from the Pacific to the Atlantic oceanic realm. Our model implies that virtually all of the oceanic lithosphere generated during the opening phase of the Rheic Ocean was consumed by subduction during Laurentia–Gondwana convergence.     

Global implications of joint fossil fuel subsidy reform and nuclear phase-out: an economic analysis

This paper uses the OECD’s global recursive-dynamic general equilibrium model ENVLinkages to examine the mid-term economic consequences and the optimal energy supply mix adjustments of a simultaneous implementation of i) a progressive fossil fuel subsidy reform in emerging and developing economies and ii) a progressive phase out of nuclear energy, mostly affecting OECD countries, China and Russia. The analysis is then transposed in the context of climate change mitigation to depict the corresponding implications for CO2 emissions, to assess the interactions between the two energy policies, and to derive how the associated costs are affected by the different policies. The phase-out scenario projects a nuclear capacity halved by 2035 as compared to the Baseline, corresponding to $120 billion losses in value-added of the nuclear industry for that year. The nuclear phase-out leaves GDP and real household consumption marginally affected in energy importing countries. A multilateral subsidy reform is more likely to affect international fossil fuel prices and alter patterns of global energy use. The fossil fuel subsidy reform, when implemented together with nuclear phase-out, more than offsets negative consequences on household consumption but still leads to a decrease in global CO2 emissions. The combined policies help save the equivalent of current energy consumption in the Middle East. Combining a climate policy, an effective fossil fuel subsidy reform, even with a lower nuclear share in the power mix, brings about multiple benefits to OECD countries which reduce their energy bill and achieve large climate change mitigation at lower cost.     

Trace metals associated with deep-sea tailings placement at the Batu Hijau copper–gold mine,Sumbawa, Indonesia

The Batu Hijau copper–gold mine on the island of Sumbawa, Indonesia operates a deep-sea tailings placement (DSTP) facility to dispose of the tailings within the offshore Senunu Canyon. The concentrations of trace metals in tailings, waters, and sediments from locations in the vicinity of the DSTP were determined during surveys in 2004 and 2009. In coastal and deep seawater samples from Alas Strait and the South Coast of Sumbawa, the dissolved concentrations of Ag, As, Cd, Cr, Hg, Pb and Zn were in the sub μg/L range. Dissolved copper concentrations ranged from 0.05 to 0.65 μg/L for all depths at these sites. Dissolved copper concentrations were the highest in the bottom-water from within the tailings plume inside Senunu Canyon, with up to 6.5 μg Cu/L measured in close proximity to the tailings discharge. In general, the concentrations of dissolved and particulate metals were similar in 2004 and 2009.     

Observations, Effects and Real Time Assessment of the March 11, 2011 Tohoku-oki Tsunami in New Zealand

The great Tohoku-oki earthquake of March 11, 2011 generated a devastating tsunami in the near field as well as substantial far-field effects throughout the Pacific Ocean. In New Zealand, the tsunami was widely observed and instrumentally recorded on an extensive array of coastal tidal gauges and supplemented by current velocity data from two sites. While the tsunami's first arrival was on the morning of March 12 in New Zealand, the strongest effects occurred throughout that afternoon and into the following day. Tsunami effects consisted primarily of rapid changes in water level and associated strong currents that affected numerous bays, harbors, tidal inlets and marine facilities, particularly on the northern and eastern shores of the North Island. The tsunami caused moderate damage and significant overland flooding at one location. The tsunami signal was clearly evident on tide gauge recordings for well over 2 days, clearly illustrating the extended duration of far field tsunami hazards. Real time analysis and modelling of the tsunami through the night of March 11, as the tsunami crossed the Pacific, was used as a basis for escalating the predicted threat level for the northern region of New Zealand. A comparison to recorded data following the tsunami shows that these real time prediction models were accurate despite the coarse near-shore bathymetry used in the assessment, suggesting the efficacy of such techniques for future events from far-field sources.     

A new flow cytometry method enabling rapid purification of diatoms from silica-rich lacustrine sediments

Sub-fossil diatoms represent an important archive of past environmental change in both terrestrial and marine settings. In recent years the isotopic analysis of diatom frustules has developed into an important area of paleo-environmental research. The extraction and concentration of diatoms from marine and lake sediments has proven difficult, particularly in silica rich samples. Here we present a new method for the rapid extraction of diatom frustules from lacustrine sediment using flow cytometry. This new technique produces samples suitable for geochemical and isotope-based research with a high degree of purity over a much shorter time frame than existing techniques, hours rather than days.