The lunar rock and mineral characterization consortium: Deconstruction and integrated mineralogical,petrologic, and spectroscopic analyses of mare basalts

The lunar rock and mineral characterization consortium (LRMCC) has conducted coordinated mineralogy/petrography/spectroscopy analyses of a suite of pristine lunar basalts. Four basalt slabs (two low‐Ti, two high‐Ti) and paired thin sections were analyzed. Thin sections were analyzed for mineralogy/petrography, while the slabs were used to prepare particulate separates of major mineral phases and bulk samples. Mineral separates and particulate bulk samples were crushed to controlled grain sizes and their reflectance spectra measured in the NASA RELAB at Brown University. The resulting data set provides an essential foundation for spectral mixing models, offers valuable endmember constraints for space weathering analyses, and represents critical new ground truth results for lunar science and exploration efforts.     

Near‐infrared spectra of clinopyroxenes: Effects of calcium content and crystal structure

Abstract– Pyroxenes are among the most common minerals in the solar system and are ideally suited for remote geochemical analysis because of the sensitivity of their distinctive spectra to mineral composition. Fe²⁺ is responsible for the dominant pyroxene absorptions in the visible and near‐infrared, but substitutions of other cations such as Ca²⁺ change the crystal structure and site geometries and thus the crystal field splitting energies of the Fe cations. To define spectral systematics resulting from major pyroxene cations (Ca²⁺, Mg²⁺, and Fe²⁺), we focus on a suite of pyroxenes synthesized with only Ca²⁺, Mg²⁺, and Fe²⁺ in the two octahedral sites, specifically examining the effect of Ca²⁺ on pyroxene absorption bands. The modified Gaussian model is used to deconvolve pyroxene spectra into component bands that can then be linked directly to crystal field absorptions. In orthopyroxenes and low‐Ca clinopyroxenes, Ca²⁺‐content has a strong and predictable effect on the positions of the absorption bands. At a threshold of Wo₃₀, the crystal field environment stagnates and the M2 bands cease to change significantly as more Ca²⁺ is added. At Wo₅₀, when most of the M2 sites are filled by Ca²⁺, band positions do not change drastically, although the presence and strengths of the 1 and 2 μm bands are affected by even trace amounts of Fe²⁺ in the M2 site. It is thus apparent that next‐nearest neighbors and the distortions they impose on the pyroxene lattice affect the electronic states around the Fe²⁺ cations and control absorption band properties.     

Robotic telescopes for high energy astrophysics in Ondřejov

We report on two small aperture robotic telescopes called BART and D50 operated in Ondřejov. Both telescopes are capable of automatic observation of gamma ray burst (GRB) optical afterglows. Coordinates of GRBs are taken from alerts distributed via Internet. Telescopes observe other interesting high energy sources when there is not any alert. The smaller telescope BART has aperture D = 254 mm. The bigger telescope D50 has a primary mirror of diameter D = 500 mm. Both telescopes are controlled by free software package RTS2 and are accessible through Internet. We describe the two telescopes and related software and show some results such as our first observed optical counterpart of GRB.     

High-contrast coronagraph for ground-based imaging of Jupiter-like planets

We propose a high-contrast coronagraph for direct imaging of young Jupiter-like planets orbiting nearby bright stars. The coronagraph employs a steptransmission filter in which the intensity is apodized with a finite number of steps with identical transmission in each step. It should be installed on a large ground-based telescope equipped with a state-of-the-art adaptive optics system. In this case, contrast ratios around 10-6 should be accessible within 0.1 arcsec of the central star. In recent progress, a...     

Evidence of space weathering in regolith breccias II: Asteroidal regolith breccias

Abstract– Space weathering products, such as agglutinates and nanophase iron‐bearing rims are easily preserved through lithification in lunar regolith breccias, thus such products, if produced, should be preserved in asteroidal regolith breccias as well. A study of representative regolith breccia meteorites, Fayetteville (H4) and Kapoeta (howardite), was undertaken to search for physical evidence of space weathering on asteroids. Amorphous or npFe⁰‐bearing rims cannot be positively identified in Fayetteville, although possible glass rims were found. Extensive friction melt was discovered in the meteorite that is difficult to differentiate from weathered materials. Several melt products, including spherules and agglutinates, as well as one irradiated rim and one possible npFe⁰‐bearing rim were identified in Kapoeta. The existence of these products suggests that lunar‐like space weathering processes are, or have been, active on asteroids.     

Medium-term responses of rocky bottoms to sewage discharges from a deepwater outfall in the NE Atlantic

An investigation on the effects of deepwater outfall discharges on the status of rocky reef communities was carried out. The sanitation system was found to be an environmentally suitable option for the protection of those habitats situated in high energy coastal environments. Sediments occurring between the predominating rocky substrates showed low values of the fine fraction (<63microm) and organic matter content. In addition, high average concentrations of Cd, Hg and Zn were found in these sediments, though these values were similar to those registered in non-affected sites, far away from the outfall. On the other hand, those assemblages typical of hard substrates that settled near the outfall showed an increase in total richness and abundance of macroinvertebrates. Moreover, the average number of species of each taxonomic group, a good indicator of the maintenance of the previous trophic structure, only varied considerably over time at the rip-rap protection. In a global context, those changes were not directly related to the discharge disturbances, but to the natural variability or the successional processes occurring within those communities. Only communities dwelling in the rip-rap protection area were affected by the proximity of the discharges.     

Molecular and isotopic partitioning of low-molecular-weight hydrocarbons during migration and gas hydrate precipitation in deposits of a high-flux seepage site

Detailed knowledge of the extent of post-genetic modifications affecting shallow submarine hydrocarbons fueled from the deep subsurface is fundamental for evaluating source and reservoir properties. We investigated gases from a submarine high-flux seepage site in the anoxic Eastern Black Sea in order to elucidate molecular and isotopic alterations of low-molecular-weight hydrocarbons (LMWHC) associated with upward migration through the sediment and precipitation of shallow gas hydrates. For this, near-surface sediment pressure cores and free gas venting from the seafloor were collected using autoclave technology at the Batumi seep area at 845 m water depth within the gas hydrate stability zone.Vent gas, gas from pressure core degassing, and from hydrate dissociation were strongly dominated by methane (> 99.85 mol.% of ∑[C₁–C₄, CO₂]). Molecular ratios of LMWHC (C₁/[C₂ + C₃] > 1000) and stable isotopic compositions of methane (δ¹³C = ? 53.5‰ V-PDB; D/H around ? 175‰ SMOW) indicated predominant microbial methane formation. C₁/C₂₊ ratios and stable isotopic compositions of LMWHC distinguished three gas types prevailing in the seepage area. Vent gas discharged into bottom waters was depleted in methane by > 0.03 mol.% (∑[C₁–C₄, CO₂]) relative to the other gas types and the virtual lack of ¹⁴C–CH₄ indicated a negligible input of methane from degradation of fresh organic matter. Of all gas types analyzed, vent gas was least affected by molecular fractionation, thus, its origin from the deep subsurface rather than from decomposing hydrates in near-surface sediments is likely.As a result of the anaerobic oxidation of methane, LMWHC in pressure cores in top sediments included smaller methane fractions [0.03 mol.% ∑(C₁–C₄, CO₂)] than gas released from pressure cores of more deeply buried sediments, where the fraction of methane was maximal due to its preferential incorporation in hydrate lattices. No indications for stable carbon isotopic fractionations of methane during hydrate crystallization from vent gas were found. Enrichments of ¹⁴C–CH₄ (1.4 pMC) in short cores relative to lower abundances (max. 0.6 pMC) in gas from long cores and gas hydrates substantiates recent methanogenesis utilizing modern organic matter deposited in top sediments of this high-flux hydrocarbon seep area.     

Experimental constraints on ultrapotassic magmatism from the Bohemian Massif (durbachite series, Czech Republic)

The equilibrium phase relations of a mafic durbachite (53 wt.% SiO₂) from the Třebíč pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338–335 Ma), have been determined as a function of temperature (900–1,100°C), pressure (100–200 MPa), and H₂O activity (1.1–6.1 wt.% H₂O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni–NiO (NNO) buffer and 2.6 log unit above NNO buffer (∆NNO + 2.6). At 1,100°C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000°C for the whole range of investigated pressure and water content in the melt. At 900°C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (<3–4 wt.% H₂O) and T < 900°C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite–clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.     

秦岭商丹断裂带的构造样式与变形分析

商丹断裂带作为扬子板块与华北板块的缝合带,在秦岭造山带中占据重要的地位。对其进行精细的构造研究,是了解扬子板块与华北板块相互作用过程的关键。研究工作在商丹断裂带东段展开,对该带进行了详细的野外观察、显微构造观察、糜棱岩化过程中温度的估算、有限应变测量、差异应力的计算以及糜棱岩化过程中运动学涡度的计算。变形温压条件指示糜棱岩形成于中-高绿片岩相到低角闪岩相变质条件。差异应力计算结果指示商丹带具备大型构造动力特征。涡度分析表明该断裂带的变形以纯剪切作用占据主导作用,但包含有简单剪切的分量,从而证明了扬子板块与华北板块之间具有以碰撞挤压为主的斜向汇聚方式。