The Amphipod Community as a Bioindicator in Algeciras Bay (Southern Iberian Peninsula) Based on a Spatio-Temporal Distribution

Abstract. The amphipod population associated with Bugula neritina (L.), a verycommon bryozoan species in Algeciras Bay (Strait of Gibraltar), was studied on a spatio-temporal scale, in order to define its role as a bioindicator. Samples were collected in December, March, June and September along a transect running from the external to the internal sampling stations.
Fifty-three species belonging to 22 families were identified; the most abundant species were Jassa marmorata H olmes , Ischyrocerus inexpectatus (R uffo ) and Phtisica marina S labber .
The spatial evolution of the amphipod community reflected the physico-chemical conditions of Algeciras Bay, yielding a clear gradient from the outer to the inner stations. The stations located at the mouth of the bay, characterised by high hydrodynamism and low sedimentation, had a higher diversity and species richness than the inner stations with low water movement and higher sedimentation. Eight species preferred for the outer stations, while another nine species were typical of the inner harbours.
The most notable aspect of the seasonal evolution was the increased dominance of the tube-builder and deposit-suspension feeder Jassa marmorota .
Structural and ordination analyses corroborate the outer-inner gradient in the bay and illustrate the importance of hydrodynamic forces and sedimentation in the amphipod community.     

中尺度数值模式中湿过程参数化的敏感性试验

本文利用一个三维中尺度模式，分别采用两种不同的湿过程处理方案ＦＰＡ和ＮＣＡ模拟同一个洋面冷锋个例，以考察模拟结果对湿过程参数化方案的敏感性。两种方案的区别在于前一种使用了次网格湿对流参数化而后者没有。通过比较分别使用ＦＰＡ和ＮＣＡ方案所进行的模拟ＦＰＳ和ＮＣＳ，发现冷锋结构在两者间出现较大差异。从８５０ hPa等压面|Δθe|等值线图所显示的结构看，ＮＣＳ中冷锋呈现为一长一短两条锋带，而ＦＰＳ中冷锋仅呈现为一条锋带。在相应的冷锋横向垂直剖面中，ＮＣＳ中存在两个相邻的锋面垂直环流，而ＦＰＳ中只有一个。另外，ＮＣＳ中对流不稳定的冷锋区出现垂直运动过分发展的现象，而ＦＰＳ中不存在这个问题。通过与卫星云图比较，我们注意到，ＮＣＳ中尽管出现了垂直运动过分发展的现象，但相对于ＦＰＳ而言，其模拟的冷锋结构与实际较为接近，成功地模拟出云图上显示的双冷锋结构。ＮＣＳ中垂直运动过分发展的一个重要原因是模式中采用的静力平衡近似。ＦＰＳ中次网格对流参数化方案的使用，通过减少甚至消除对流不稳定度，一方面使垂直运动的过分发展倾向受到约束，另一方面也可能使在对流不稳定层结下的锋区环境中本应出现的中尺度结构失去了形成的机会。     

Isotopic composition of xenon in petroleum from the shell bullwinkle field

We have measured the abundance and isotopic composition of xenon in petroleum samples from the Shell Bullwinkle Field off the coast of Louisiana. We used an oxidation and purification procedure designed to insure complete extraction and clean up of xenon from the petroleum. The xenon isotopic composition was found to be similar to the atmospheric value for one petroleum sample. While the results of the second sample suggest possible enrichment of the heavier isotopes, the errors associated with these excesses preclude a definitive statement to that effect. No monoisotopic enrichment in¹²⁹Xe was detected in either sample, the presence of which might have allowed us to deduce the petroleum age. Our results represent only the second xenon measurement from petroleum, and the concentrations are within the range of values published in the earlier report.     

Growth response of the saltbush Atriplex nummularia L. to inoculation with the arbuscular mycorrhizal fungus Glomus intraradices

Plantlets of Atriplex nummularia were inoculated with the arbuscular mycorrhizal fungi Glomus intraradices in a pot experiment. Plants were grown in a low P soil. Highly significant growth response of a Chenopodiaceae was recorded for the first time. Mycorrhizal colonization of roots was well developed, internal hyphae and vesicles were observed, but not arbuscules. These observations suggest that arbuscules are not necessary to obtain significant growth stimulation from mycorrhizal inoculation. Atriplex nummularia is already used as forage crops, its high mycorrhizal dependency offers possibilities to develop this production and revegetation strategies.     

Confirmation of beach accretion by grain-size trend analysis: Camposoto beach, Cádiz, SW Spain

An application of the grain size trend analysis (GSTA) is used in an exploratory approach to characterize sediment transport on Camposoto beach (Cádiz, SW Spain). In May 2009 the mesotidal beach showed a well-developed swash bar on the upper foreshore, which was associated with fair-weather conditions prevailing just before and during the field survey. The results were tested by means of an autocorrelation statistical test (index I of Moran). Two sedimentological trends were recognized, i.e. development towards finer, better sorted and more negatively skewed sediment (FB–), and towards finer, better sorted and less negatively or more positively skewed sediment (FB+). Both vector fields were compared with results obtained from more classical approaches (sand tracers, microtopography and current measurements). This revealed that both trends can be considered as realistic, the FB+ trend being identified for the first time in a beach environment. The data demonstrate that, on the well-developed swash bar, sediment transported onshore becomes both finer and better sorted towards the coast. On the lower foreshore, which exhibits a steeper slope produced by breaking waves, the higher-energy processes winnow out finer particles and thereby produce negatively skewed grain-size distributions. The upper foreshore, which has a flatter and smoother slope, is controlled by lower-energy swash-backwash and overwash processes. As a result, the skewness of the grain-size distributions evolves towards less negative or more positive values. The skewness parameter appears to be distributed as a function of the beach slope and, thus, reflects variations in hydrodynamic energy. This has novel implications for coastal management.

New palaeomagnetic data from Central Iran and a Triassic palaeoreconstruction

New pole positions for Triassic and Cretaceous times have been obtained from volcanic and sedimentary sequences in Central Iran. These new results confirm the general trend of the Apparent Polar Wander Path (APWP) of the Central-East-Iran microplate (CEIM) from the Triassic through the Tertiary as published by Soffel and Förster (1983, 1984). Two new palaeopoles for the Triassic of the CEIM have been obtained; limestones and tuffs from the Nakhlak region yield a mean direction of 094.0°/25.0°, N=12, k=4.1,α ₉₅=24.7°, after bedding correction, corresponding to a palaeopole position of 310.8°E; 3.9°S, and volcanic rocks from the Sirjan regions yield a mean direction of 114.5°/35.1°, N=44, k=45.9,α ₉₅=3.2° after bedding correction and a palaeopole position of 295.8°E; 10.3°N. Combining these with the two previously published results yields a new palaeopole position of 317.5°E; 12.7°N, for the Triassic of the CEIM, thus confirming that large counterclockwise rotations of the CEIM have occurred since the Triassic time. New results have also been obtained from Cretaceous limestones from the Saghand region of the CEIM. The mean direction of 340.7°/26.3°, N=33, k=44.3,α ₉₅=3.8°, and the corresponding palaeopole position of 283.1°E; 64.4°N, is in agreement with previously determined Cretaceous palaeopole positions of the CEIM. Furthermore, results have also been obtained from Triassic dolomite, limestone, sandstone and siltstone from the Natanz region, which is located to the west of the CEIM. A total of 161 specimens from 44 cores taken at five sites gave a mean direction of the five sites at 033.3°/25.1°, N=5, k=69.0,α ₉₅=9.3° and a palaeopole position of 167.2°E; 53.7°N. They pass the positive fold test of McElhinny (1964) on the level of 99% confidence. This pole position is in fairly good agreement with the mean Triassic pole position of the Turan Plate (149°E; 49°N). It indicates that the area of Natanz has not undergone the large counterclockwise rotation relative to the Turan plate since the Triassic, which has been shown for the CEIM. A Triassic palaeogeographic reconstruction of Iran, Arabia (Gondwana) and the Turan Plate (Eurasia) is also presented.     

Comparison of Two Methods Used to Model Shape Parameters of Pareto Distributions

Two methods are compared for estimating the shape parameters of Pareto field-size (or pool-size) distributions for petroleum resource assessment. Both methods assume mature exploration in which most of the larger fields have been discovered. Both methods use the sizes of larger discovered fields to estimate the numbers and sizes of smaller fields: (1) the tail-truncated method uses a plot of field size versus size rank, and (2) the log–geometric method uses data binned in field-size classes and the ratios of adjacent bin counts. Simulation experiments were conducted using discovered oil and gas pool-size distributions from four petroleum systems in Alberta, Canada and using Pareto distributions generated by Monte Carlo simulation. The estimates of the shape parameters of the Pareto distributions, calculated by both the tail-truncated and log–geometric methods, generally stabilize where discovered pool numbers are greater than 100. However, with fewer than 100 discoveries, these estimates can vary greatly with each new discovery. The estimated shape parameters of the tail-truncated method are more stable and larger than those of the log–geometric method where the number of discovered pools is more than 100. Both methods, however, tend to underestimate the shape parameter. Monte Carlo simulation was also used to create sequences of discovered pool sizes by sampling from a Pareto distribution with a discovery process model using a defined exploration efficiency (in order to show how biased the sampling was in favor of larger fields being discovered first). A higher (more biased) exploration efficiency gives better estimates of the Pareto shape parameters.     

The Mass Loss of the Main Asteroid Belt and Mars’ Zone Caused by the Impact of Solar Radiation and Jupiter: I: Numerical Calculations of the Dust Evolution

Solar System Research - The values of the mass of Mars and the asteroid belt are one and three orders of magnitude, respectively, less than those theoretically predicted from the extrapolation of...